Mesoporous titanium dioxide as a novel solid-phase extraction material for flow injection micro-column preconcentration on-line coupled with ICP-OES determination of trace metals in environmental samples

Mesoporous titanium dioxide as a novel solid-phase extraction material for flow injection micro-column preconcentration on-line coupled with ICP-OES determination of trace metals (Co, Cd, Cr, Cu, Mn, Ni, V, Ce, Dy, Eu, La and Yb) in environmental samples was described. Possessing a high adsorption capacity towards the metal ions, mesoporous titanium dioxide has found to be of great potential as an adsorbent for the preconcentration of trace metal ions in samples with complicated matrix. The experimental parameters including pH, sample flow rate, volume, elution and interfering ions on the recovery of the target analytes were investigated, and the optimal experimental conditions were established. Under the optimized operating conditions, a preconcentration time of 90 s and elution time of 18 s with enrichment factor of 10 and sampling frequency of 20 h⁻¹ were obtained. The detection limits of this method for the target elements were between 0.03 and 0.36 μg L⁻¹, and the relative standard deviations (R.S.D.s) were found to be less than 6.0% (n =7, c =5 ng mL⁻¹). The proposed method was validated using a certified reference material, and has been successfully applied for the determination of the afore mentioned trace metals in natural water samples and coal fly ash with satisfactory results.     

Application of amperometric sol-gel biosensor to flow injection determination of glucose

A glucose biosensor with enzyme immobilised by sol–gel technology was constructed and evaluated. The glucose biosensor reported is based on encapsulated GOX within a sol–gel glass, prepared with 3-aminopropyltriethoxy silane, 2-(3,4-epoxycyclohexyl)-ethyltrimetoxy silane and HCl. A flow system incorporating the amperometric biosensor constructed was developed for the determination of glucose in the 1×10⁻⁴–5×10⁻³ mol l⁻¹ range with a precision of 1.5%. The results obtained for the analysis of electrolytic solution for iv administration and human serum samples showed good agreement between the proposed method and the reference procedure, with relative error <5%.     

流动注射在线共沉淀预富集火焰原子吸收法测定痕量铜

研究了以Ｎｉ＾２＋－ＤＤＴＣ为共沉淀载体，流动注射在线共沉淀预富集－火焰原子吸收光谱法测定痕量铜的体系，在０．３ｍｏｌ．Ｌ＾－１的硝酸介质中，铜离子在编织反应器中与Ｎｉ＾２＋－ＤＤＴＣ（产生共沉淀，并被收集在编织器内壁上，用甲基异丁基酮（ＭＩＢＫ）在线洗脱沉积物并引入火争原子化器中测定。当富集时间为４０ｓ时，４０μｇ．Ｌ＾－１的铜１０次测定的相对标准偏差为３．０％，灵敏度提高６０倍，检出限（３σ）     

纳米CoHCF修饰电极的制备及其对血红蛋白的电化学测定研究

A cobalt hexacyanoferrate （CoHCF） nanoparticle （size ca. 60 nm） chemically modified electrode （CME） was fabricated and the electrochemical behavior of hemoglobin （Hb） at this nanosized CoHCF CME was studied. In comparison with a bare glassy carbon electrode （GCE） and a general CoHCF CME electrodeposited in a traditional manner, the present nanosized CoHCF CME performed efficiently electrocatalytic reduction for Hb with relatively high sensitivity, stability, and longlife, Combined with liquid chromatography （LC）, the nanosized CoHCF CME was used as the electrochemical detector of Hb in the established flow injection analysis-electrochemical determination （FIA-ECD） system. The peak current was a linear function of concentrations in the range from 2.5×10^-8 to 5.0×10^-6mol/L for Hb, with detection limit of 1.4×10^-8 mol/L. The FIA-ECD system has been successfully applied to assess the Hb content of clinic blood samples with advantages of sensitiveness, speediness, easy control and small sample-consumption.     

芯片式流通池顺序注射可更新表面反射光谱法用于酶反应检测

将芯片式流通池顺序注射可更新表面反射光谱法用于酶反应检测。HRP催化H2O2氧化BPR底物的反应用于对H2O2的检测。此反应体系与葡萄糖氧化酶联用，用于对血清中葡萄糖的检测。     

电化学检测在流动注射分析中的应用

评述了近几年来电化学检测在流动注射分析中的应用，展望了流动注射电化学分析法的发展动向。     

流动注射在线萃取-火焰原子吸收法测定食用盐中的锌

基于锌与 1 (2 吡啶偶氮 ) 2 萘酚 (简称PAN)形成的配合物可被氯仿萃取 ,从高盐基体样品中分离富集锌 ,利用自行设计的分相器 ,实验确定了最佳的流动注射在线萃取 火焰原子吸收光度法测定锌的流路系统和化学反应条件。在选定的工作条件下 ,其RSD和检出限分别为 4 3 % (c=0 6 μg/mL ,n =1 1 )和0 0 3 μg/mL ,测定速度为 2 5样 /h。用于实际样品的测定 ,加标回收率为 97%～1 0 6 %。     

聚双环戊二烯反应注射成型

本文介绍了国外有关聚双环戊二烯反应注射成型的研究进展，讨论了国内进行聚双环戊二烯反应注射成型开发研究的现实意义，并对这一领域的发展进行了展望     

Spectrophotometric determination of total phenolics by solvent extraction and sorbent extraction optosensing using flow injection methodology

Flow injection analysis (FIA) procedures for the Spectrophotometric determination of phenol involving in-line concentration by solvent and sorbent extraction have been developed. The imine product formed in the reaction between phenol and 4-aminoantipyrine (4-AAP) is either extracted into chloroform (solvent extraction) or is temporarily retained on C₁₈-modified silica material contained in a microcolumn (sorbent extraction). In the latter case two variants of detection have been used namely the Spectrophotometric measurement of the methanolic eluent containing the concentrated dye and at-column optosensing of the retained reaction product followed by methanol elution to maintain reversibility of the process. In the solvent extraction procedure a 10-fold increase of sensitivity compared to the common FIA method without extraction is achieved but no corresponding improvement in detectability is observed. Under optimized conditions the detection limit amounts to 8 μg l⁻¹. Using sorbent extraction methodology, high concentration factors can be obtained when large sample volumes are used. The only limitation in getting correspondingly lower detection limits are an increasingly high and variable blank value with sampling volume. The detection limits obtained for measurement of the absorbance in the eluent and on-column optosensing are 11 μg l⁻¹ and 0.4 μg l⁻¹, respectively. A study of the extractability of various phenol derivates using both solvent and sorbent extraction revealed lower relative response rates compared to the FIA method without extraction. Phenolics that possess an additional acidic group are present in ionized form at the high pH of the assay and are not extractable at all.     

On-line sorption preconcentration of metals based on mixed micelle cloud point extraction prior to their determination with micellar chemiluminescence: Application to the determination of chromium at ng l levels

The on-line incorporation of cloud point extraction (CPE) to flow injection analysis (FIA) is modified to extract and preconcentrate metal species rapidly, avoiding the formation of hydrophobic complexes, using a mixed micellar medium. Coupling the procedure with chemiluminescence (CL) detection based on the catalytic activity of metal species on the luminol-hydrogen peroxide reaction and enhancing the signal with the presence of a micellar carrier containing bromide ions produces a powerful tool for the preconcentration and determination of metal species at ng l⁻¹ levels. As an analytical demonstration ultratrace concentrations of chromium were conveniently detected and quantified in samples with a complex matrix such as seawater and wastewater. The figures of merit for the determination of chromium were: 0.9-1.6% R.S.D. (n=5) with detection and quantification limits 0.5 and 2.0 ng l⁻¹, respectively. The calibration graph was rectilinear from 2 to 200 ng l⁻¹ (r=0.9996, n=6). Several other metal ions were determined in ideal situations, with analogous results.