Remarkably improved cycling stability of 3D porous Cu–Sn anode for lithium-ion full cells by adjusting working voltage range

Numerous studies confirm that three dimensional porous Cu–Sn (3DP Cu–Sn) anode possesses good application prospect in light of its desirable electrochemical performance on lithium ion half cells, but there are a few related systematic researches on lithium ion full cells until now, which is indispensable before its commercialization. Herein, the effects of galvanostatic charge-discharge voltage range on the cycling stability of 3DP Cu–Sn anode for lithium ion full cells are investigated systematically. The results show that the suitable charge-discharge voltage range plays a key role in improving the reversible capacity and cycling stability of the 3DP Cu–Sn||LiCoO₂ full cell, which is closely related to maintaining the electrode structure stable by controlling the amount of Li⁺ extracted and inserted. Especially, in the voltage range of 1.2–3.9 ​V, the full cell exhibits remarkably improved electrochemical properties with the high initial reversible capacity of 2.71 ​mAh cm⁻² and 71.95% capacity retention upon 80 cycles. We believe that this work can provide a significant reference for the practical application of porous Sn-based anodes.     

Towards a microchannel‐based X‐ray detector with two‐dimensional spatial and time resolution and high dynamic range

X‐ray detectors that combine two‐dimensional spatial resolution with a high time resolution are needed in numerous applications of synchrotron radiation. Most detectors with this combination of capabilities are based on semiconductor technology and are therefore limited in size. Furthermore, the time resolution is often realised through rapid time‐gating of the acquisition, followed by a slower readout. Here, a detector technology is realised based on relatively inexpensive microchannel plates that uses GHz waveform sampling for a millimeter‐scale spatial resolution and better than 100 ps time resolution. The technology is capable of continuous streaming of time‐ and location‐tagged events at rates greater than 10⁷ events per cm². Time‐gating can be used for improved dynamic range.     

On the Nano/Micro-Mechanics of Metallic Glass

Metallic glass (MG) is amorphous and has some outstanding properties such as ultrahigh strength, superior elasticity, and excellent thermo-plasticity. However, as MG is relatively new to the metal family, the relationship between its physical properties and amorphous structure is still unclear. This article aims to provide an insightful discussion through a comprehensive review about the investigations in the past few decades on the scientific mechanisms of this class of material. The discussion of the paper will include the following key aspects: (1) the formation mechanism of an amorphous structure through glass transition, (2) the structural characterization and models, (3) the micromechanics of plastic event and shear band, and (4) the correlation between the amorphous structure and its mechanical properties.     

关于一元酸准确滴定判据的商榷

化学分析教科书中给出的弱酸能被准确滴定的条件是cKa≥1.0×10-8。本文根据这一判据的来源(滴定突跃≥0.3pH单位),对一元酸体系的滴定情况进行了严格数学处理。计算结果表明,只有同时满足弱酸的浓度c1.0×10-3mol/L和cKa≥1.0×10-8条件下,弱酸才能被准确滴定。对于浓度极稀的酸溶液(c≤1.4×10-4mol/L),无论强酸还是弱酸都不能被准确滴定。对教材很少涉及的不同浓度酸碱互相滴定的情况也给出了有价值的结论。     

α‐FeOOH−MoO3 Nanorod for Effective Photo‐Fenton Degradation of Dyes and Antibiotics at a Wide Range of pH

It's highly significant to develop a novel catalyst, which can be active at a wide range of pH, for an effective photo‐Fenton reaction. In this work, α‐FeOOH?MoO₃ nanorod was prepared by a one‐step hydrothermal method and applied in photo‐Fenton degradation of organic pollutants. Benefit from the electron migration mechanism of Z‐scheme and excellent photoelectric performance, the catalyst exhibited superior photo‐Fenton activity in degradation of organic pollutants. In addition, the catalyst holds good stability after 5 recycles. These results demonstrated that this catalyst has wide application prospect in organic wastewater treatment.     

基于支座反力影响线曲率差分的等截面连续梁损伤识别方法

为了实现仅采用损伤状态信息对等截面连续梁进行损伤识别,通过推导三跨不等跨连续梁在移动荷载作用下的支座反力影响线,发现支座反力影响线求曲率并作差分后的曲线在损伤位置会发生突变,基于该现象提出了一种损伤定位方法,进一步建立了损伤程度计算方法,可对损伤程度进行较精确的定量。通过一三跨连续梁和一四跨连续梁工程实例的仿真分析,证明了支座反力影响线曲率差分指标损伤定位和相应的损伤程度定量方法对等截面连续梁损伤识别具有可行性。     

末制导雷达干扰技术的系统仿真设计

在分析几种常见末制导雷达干扰技术实现过程特征的基础上,获得具有一定普适性的仿真场景抽象,提出了一种针对单脉冲末制导雷达干扰技术对抗仿真系统构建方法,给出了仿真实现的总体框架,并对具体实现过程中的位置更新、坐标变换、回波产生、波束调制等关键问题进行了论述.使用该方法,构建了多假目标拖引欺骗干扰仿真系统,对该干扰样式实现的主要参数进行了设计,并以距离拖引为例进行了验证.仿真结果验证了该仿真系统构建方法的正确性和有效性.     

增压柴油机耦合条件下的环境影响研究

将增压柴油机与冷却系统综合考虑,分析了大气环境对增压柴油机与冷却系统的影响机制,提出了增压柴油机与冷却系统的耦合建模方法.采用GT-Suite软件建立了耦合仿真模型,并通过实验数据对模型进行了校核.在此基础上通过改变环境条件,得到了不同环境条件下增压柴油机的性能变化规律,并与非耦合模型进行了对比分析.结果表明,采用耦合模型能够考虑环境变化引起的冷却系统变化对增压柴油机的影响,在典型环境地区,耦合模型受环境影响要明显大于非耦合模型,用两种模型计算所得到的结果差异最大可达15%左右.     

半参数非线性模型中的t-型估计和影响分析

给出半参数非线性回归模型的t-型估计及其EM算法,同时获得估计的相合性及渐近正态性.并基于EM算法中的Q函数,研究了半参数非线性回归模型的统计诊断方法.最后,用一个模拟例子和一个实际例子验证了本文提出的t-型估计和诊断方法的有效性.     

Volume change behavior of unsaturated soils under non-isothermal conditions

With the development of modern geotechnical engineering practices such as the construction of high level radioactive waste repositories, exploitation and utilization of geothermal resources, energy-saving buildings and underground storage of CO 2 , research into the influence of temperature on the basic mechanical properties of unsaturated soils has become an important issue internationally. By using the work expression and considering the influence of temperature on the basic properties of unsaturated soils, the average soil skeleton stress, modified suction and temperature were selected as state variables of generalized forces in thermodynamics and the soil skeleton strain, saturation and entropy were chosen as state variables of generalized flows conjugate to the variables of generalized forces. Based on the nonlinear multi-field coupled model and by using existing experimental results, an elastic-plastic constitutive model of unsaturated soils under non-isothermal conditions was developed to analyze the influence of temperature on the deformation properties of unsaturated soils. The model was used to predict and analyze the influence of suction and temperature on the deformation properties of unsaturated soils under isotropic conditions, and was successfully verified using experimental results.