工业CT重建图像中边缘梯度效应引起的高频伪影

为研究伪影对大型工件内部密度锐变区域高对比度微小缺陷检测的影响,从一个简单的轴对称断层模型出发,计算了边缘梯度效应引起的通过物体内部不同材料交界面处的射束的投影偏差。并研究采样相位的影响,探讨了由此偏差引起的重建图像中的高频伪影的表现形式。计算结果表明,高频伪影具有相当的强度,且具有与缺陷相似的表现形式,从而影响工业CT的检测能力。结合点扩散过程,高频伪影强度的计算为评估工业CT边缘处的缺陷检测能力提供了理论依据。     

工业企业经营预算管理构想

分析了经营预算的要素及权力机构,介绍了经营预算的编制流程和经营预算的组织管理。     

外资对我国产业结构升级的影响与启示

基于外资促进产业结构升级的理论分析,阐述了外资对我国产业结构的负面影响,提出了利用外资促进产业结构升级并实现协调发展的途径。     

山西省吴家庄水库工业供水工程管线设计

介绍了山西省吴家庄水库工业供水管道工程管线的选材、水力计算及纵横断面设计。     

Comparison of procedures for correction of matrix interferences in the multi-element analysis of soils by ICP-AES with a CCD detection system

Three procedures, matrix matching, plasma optimisation and single-point standard-addition, have been evaluated to ascertain the best procedure for simultaneous multi-element analysis of industrial soils by ICP-AES with CCD detection. A standard reference material, CRM143 from the Bureau Communautaire de Réference (BCR), has been analysed for Cd, Cr, Cu, Mn, Ni and Pb using the three different matrix interference correction procedures. All three procedures give comparable results which are in good agreement with the BCR values, except for Cr. The single-point standard addition procedure was chosen, on the basis of economy and ease of implementation, to correct for matrix interferences in the determination of Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sn and V in soil samples collected from an industrial site in England. Concentrations of some of the elements were found to vary greatly with sampling depth. For example, the concentration of Mn, determined using the atomic line at 279.920 nm, increased from 426 ± 3 g/g at a depth of 18–28 cm to 5996 ± 144 g/g at 60–85 cm.     

粘土矿物的结构特征及其应用研究

阐述了贮量巨大、用途广泛的粘土矿物，其充分开发应用的关键，在于根据其结构特征，并通过适当的物理、化学方法加以改造、以适应各种不同工业应用的要求。并以我们对粘土矿物进行活化、改性、层间插入及其工业应用产品开发的初步研究成果，阐明利用粘土硅酸盐多层次结构的可变性，开拓新的应用性能的可能性及粘土矿物充分开发应用的途径。     

工业原料铁制备浆态床FT合成用的Fe-Cu-K-Si催化剂的探索

费托合成技术是公认的将煤基合成气转化为液体燃料和化工原料的重要技术途径。虽然固定床费托合成技术从五十年代起已经工业运转，但是浆态床费托合成技术由于其传热性能好，可直接使用第二代气化炉生产的富CO合成气，反应器结构简单，单台反应器生产能力大，开工率高，产品结构合理，     

Method Development for the Speciation of Chromium in River and Industrial Wastewater Using GFAAS

A simple, sensitive and inexpensive method for the speciation of Cr(VI) and Cr(III) in river and industrial wastewater was developed, optimized and validated. Samples were collected, filtered and then chromium species were determined in the filtrate. In the filtrate, total Cr was determined directly by Graphite Furnace Atomic Absorption Spectrometry (GFAAS). A portion of the filtered sample was buffered to pH 6.4, extracted with Amberlite LA-2/MIBK and finally Cr(VI) was determined in the organic extract and Cr(III) in the aqueous phase using GFAAS. The method was evaluated by analysis of the certified reference material, CRM 544, and good accuracy was obtained. The limit of detection for Cr(VI) and Cr(tot)/Cr(III) was found to be 0.30 and 0.08 µg L⁻¹, respectively, and a precision expressed as relative standard deviation of better than 11% was achieved for nine replicates. A number of water samples from the Tinishu Akaki River, Ethiopia, and wastewater samples from a chemical plant in Germany, were analysed. In addition to the GFAAS method, Cr(tot) was also determined using ICP-MS (in CRM 544, lyophilized water, and Tinishu Akaki River water samples) and Cr(tot) and Cr(VI) using UV-VIS spectrophotometry (in CRM 544 and industrial wastewater samples). Good agreement between the different methods was found.     

人机系统中作业域仿真研究

该文讨论了人机系统中人机表现功能及其关系。采用人体运动仿真确定最大作业空间,以保证操纵的合理性与可靠性。论述了立式镗庄的结构布局设计,采用按黄金分割比的造型比例,达到秸比例调和视觉效果,动画仿真模拟了立式镗庄的操纵过程。     

Industrial standardization of thermal analysis in Japan

To satisfy the needs for industrial standards for thermal analysis in the Japanese polymer industry, round-robin tests of differential scanning calorimetry (DSC), thermogravimetry (TG), thermomechanical analysis (TMA) and thermodilatometry (TD) have been carried out recently. The results are discussed in this short review. The DSC applications tested were not only for determination of transition temperature but also for measurements of the transition heat and heat capacity. The TG task group did not aim at longterm thermal endurance studies, but relative thermal stability in molding and estimation of filler content, residual solvent content, etc. TMA was found to be a useful tool for measuring softening temperature and heat distortion temperature, especially for high-temperature engineering plastics, instead of the Vicat test which has temperature limitations. For temperature calibration of DSC and TG, ICTA-NIST certified reference materials were used together with other potential temperature standards; some inorganic substances and alloys were not found to be preferable to pure metals. For TMA and TD metal plates were found to be very useful for temperature calibration. Analysis of the round-robin test results also clarified present status of practical applications of thermal analysis, such as reproducibility and causes of errors. Plenary lecture