STUDIES ON ORGANOPHOSPHORUS COMPOUNDS XLIV. STRUCTURAL EFFECT OF ELECTROPHILES ON THE REGIOSELECTIVITY OF CARBANION DERIVED FROM DIALKYL ALLYLPHOSPHONATES

Abstract

For the evaluation of the structural effect of electrophiles on the regioselectivity of ambident anions, the reaction of phosphoryl allylic carbanion with p-substituted benzaldehydes was investigated.     

Cure Kinetics of Poly(acrylonitrile-butadiene-styrene) Modified Epoxy–Amine System

The cure kinetics of epoxy based on the diglycidyl ether of bisphenol A (DGEBA) modified with different amounts of poly(acrylonitrile-butadiene-styrene) (ABS) and cured with 4,4′-diaminodiphenylsulfone (DDS) was investigated by employing differential scanning calorimetry (DSC). The curing reaction was followed by using an isothermal approach over the temperature range 150–180°C. The amount of ABS in the blends was 3.6, 6.9, 10 and 12.9 wt%. Blending of ABS in the epoxy monomer did not change the reaction mechanism of the epoxy network formation, but the reaction rate seems to be decreased with the addition of the thermoplastic. A phenomenological kinetic model was used for kinetic analysis. Activation energies and kinetic parameters were determined by fitting the kinetic model with experimental data. Diffusion control was incorporated to describe the cure in the latter stages, predicting the cure kinetics over the whole range of conversion. The reaction rates for the epoxy blends were found to be lower than that of the neat epoxy. The reaction rates decreased when the ABS contents was increased, due to the dilution effect caused by the ABS on the epoxy/amine reaction mixture.     

Self-assembling Dimeric and Trimeric Aggregates Based on Solvophobic and Charge-pairing Interactions

Self-assembly processes based on shape complementarity and noncovalent binding interactions are widely recognized as a fundamental principle in nature. Besides charge pairing and hydrogen bonding, hydrophobic interactions play a crucial role in water. Here we report the self-assembly of structurally simple monomers to yield defined dimeric and trimeric aggregates in highly polar media, based on ionic and solvophobic interactions. NMR, mass spectrometry and curve fitting were used to characterize these supramolecular assemblies in water–methanol solutions.     

Cancer cell metabolism: implications for therapeutic targets

Cancer cell metabolism is characterized by an enhanced uptake and utilization of glucose, a phenomenon known as the Warburg effect. The persistent activation of aerobic glycolysis in cancer cells can be linked to activation of oncogenes or loss of tumor suppressors, thereby fundamentally advancing cancer progression. In this respect, inhibition of glycolytic capacity may contribute to an anticancer effect on malignant cells. Understanding the mechanisms of aerobic glycolysis may present a new basis for cancer treatment. Accordingly, interrupting lactate fermentation and/or other cancer-promoting metabolic sites may provide a promising strategy to halt tumor development. In this review, we will discuss dysregulated and reprogrammed cancer metabolism followed by clinical relevance of the metabolic enzymes, such as hexokinase, phosphofructokinase, pyruvate kinase M2, lactate dehydrogenase, pyruvate dehydrogenase kinase and glutaminase. The proper intervention of these metabolic sites may provide a therapeutic advantage that can help overcome resistance to chemotherapy or radiotherapy.     

Collision cell pressure effect on CID spectra pattern using triple quadrupole instruments: a RRKM modeling

Control of the ion internal energy in mass spectrometry is needed to establish a workable mass spectral library. The purpose of this study is to understand and to compare the pressure effects on the collision‐induced dissociation (CID) spectrum pattern recorded using triple quadrupole instruments. The monoprotonated Leucine enkephalin [YGGFL, H⁺] was used as a thermometer molecule to calibrate the electrospray ionization (ESI) and the CID internal energies deposited on the molecular species and the time scale of ion decompositions. The survival yield and the ratio of a₄/b₄ fragment ions were mainly monitored. The energy uptake for the ESI source geometry used in our study has no impact on the CID spectrum fingerprint. The collision cell pressure for the [YGGFL, H⁺] has a major influence on the SY curves slope and on the experimental time scale. To demonstrate the pressure effect on internal energy distribution, three models (threshold, thermal and collisional) based on RRKM theory were built using the Masskinetics software. As a result, the limit of each model is discussed, and the investigation demonstrates that the thermal model, using truncated Maxwell‐Boltzmann internal energy distribution, is well‐suited for simulating the experimental data at high pressure widely used in the analytical conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Dispersion of Graphene Sheets in Aqueous Solution by Oligodeoxynucleotides

Applications of graphene sheets in the fields of biosensors and biomedical devices are limited by their insolubility in water. Consequently, understanding the dispersion mechanism of graphene in water and exploring an effective way to prepare stable dispersions of graphene sheets in water is of vital importance for their application in biomaterials, biosensors, biomedical devices, and drug delivery. Herein, a method for stable dispersion of graphene sheets in water by single‐stranded oligodeoxynucleotides (ssODNs) is studied. Owing to van der Waals interactions between graphene sheets, they undergo layer‐to‐layer (LtL) aggregation in water. Molecular dynamics simulations show that, by disrupting van der Waals interaction of graphene sheets with ssODNs, LtL aggregation of graphene sheets is prevented, and water molecules can be distributed stably between graphene sheets. Thus, graphene sheets are dispersed stably in water in the presence of ssODNs. The effects of size and molarity of ssODNs and noncovalent modification of graphene sheets are also discussed.     

MoO42-取代对Nasicon型Li3Fe2(PO4)3正极材料电化学性能的影响

以MoO₄^2-部分取代Li₃Fe₂（PO₄）₃中的PO₄^3-,研究表明：加入的MoO₄^2-离子主要以固溶形式存在于Li₃Fe₂（PO₄）₃中,起到了显著改善其电化学性能的作用。其中,MoO₄^2-掺杂浓度为0.3的样品表现出最佳的电化学性能,其在0.5C倍率下的首次放电容量为113.7 mAh·g^-1,这一数值比未掺杂的提高了20.7%;经过60次循环充放电,容量保持率为94%。将放电倍率从0.5C逐步增大至5C,再降至初始的0.5C,并在每个倍率循环10次,这一材料的最终放电容量可达首次0.5C的95%。这些优异的性能应归因于MoO₄^2-掺杂使材料的氧化还原能力增强,氧化还原电对的电势差减小,电池内部的电荷转移电阻减小,以及Li⁺扩散系数增加。     

Bi2Fe4O9/g-C3N4/UiO-66三元复合材料的协同光催化作用

通过水热法合成具有协同机制的三元复合材料Bi₂Fe₄O₉/g-C₃N₄/UiO-66,研究表明三元复合光催化剂的催化活性要高于二元材料和纯材料。这主要是由于Bi₂Fe₄O₉更易于和g-C₃N₄结合形成稳定的Z-scheme异质结结构,使三元复合材料增强了可见光响应能力,提高了电子-空穴分离能力,增强了空穴和电子的氧化还原能力。