非PLL相位平均型参考线原型验证

射频相位参考线是粒子加速器的重要组成部分之一,为射频低电平控制系统(LLRF)、束流诊断系统、定时系统等提供稳定的相位锁定参考信号。为减少远距离传输过程中由环境温度变化导致的射频传输线中的射频相位漂移,多个加速器装置中已经采用射频相位参考线提供射频相位参考,这些相位参考的实现方案主要是基于恒温控制和基于光纤锁相。与这些方案相比,采用相位平均方法不仅可以保持长距离节点之间的相位稳定,而且更易于现场安装与维护。现有的带有锁相环(PLL)的终端短路方式实现相位平均参考线的方案仍有一些节点数量限制等方面的不足,本文对相位平均参考线结构进行了去除PLL的简化设计并进行了验证,以期增加更多的相位分配节点以及降低对射频器件参数的要求。对非PLL的单端输入终端短路相位平均方案与两端输入各节点间互为参考的相位平均方案分别进行了实验测试,结果表明两者的相位RMS精度可以达到0.1°~0.3°。并对不同的相位平均实现方案中相位不稳定的产生原因进行了分析,结果表明,除环境温度外,同轴线缆材质、合成相位与幅度的不平衡合成等也是重要影响因素。     

Generating Artificial Reverberation via Genetic Algorithms for Real-Time Applications

We introduce a Virtual Studio Technology (VST) 2 audio effect plugin that performs convolution reverb using synthetic Room Impulse Responses (RIRs) generated via a Genetic Algorithm (GA). The parameters of the plugin include some of those defined under the ISO 3382-1 standard (e.g., reverberation time, early decay time, and clarity), which are used to determine the fitness values of potential RIRs so that the user has some control over the shape of the resulting RIRs. In the GA, these RIRs are initially generated via a custom Gaussian noise method, and then evolve via truncation selection, random weighted average crossover, and mutation via Gaussian multiplication in order to produce RIRs that resemble real-world, recorded ones. Binaural Room Impulse Responses (BRIRs) can also be generated by assigning two different RIRs to the left and right stereo channels. With the proposed audio effect, new RIRs that represent virtual rooms, some of which may even be impossible to replicate in the physical world, can be generated and stored. Objective evaluation of the GA shows that contradictory combinations of parameter values will produce RIRs with low fitness. Additionally, through subjective evaluation, it was determined that RIRs generated by the GA were still perceptually distinguishable from similar real-world RIRs, but the perceptual differences were reduced when longer execution times were used for generating the RIRs or the unprocessed audio signals were comprised of only speech.     

基于非线性光纤环形镜的少模脉冲幅度调制再生器

随着网络带宽需求的快速增加,波分复用系统的容量已接近非线性香农极限.为了适应未来网络的发展,空分复用技术引起了越来越多的关注.本文首次提出基于少模非线性光纤环形镜(FM-NOLM)的脉冲幅度调制(PAM)全光再生器,描述了其工作原理和具体设计过程.采用COMSOL软件对组成FM-NOLM的硫化物高非线性光纤进行了模式特性仿真.以LP01,LP11,LP21三个光纤模式为例,确定了再生器的参数,计算出每个模式的功率转移函数曲线.仿真分析了该少模PAM-4全光再生器的噪声抑制(NRR)性能,并与单模情形进行了比较.研究表明,1)对于每个空间模式的PAM信号,所有再生电平具有一致的功率转移性能;2)当输入信噪比(SNR)约大于20 dB时,三种模式的噪声抑制比均可超过3 dB,并随着输入信噪比线性增加,其斜率约为1.2;3)在相同输入SNR条件下,三种模式的噪声抑制比相差不大,不超过1.1 dB.为了说明再生器的再生性能,当输入SNR为25 dB时,我们还给出了再生前后PAM-4信号的功率分布直方图.与现有的再生方案相比,本文方案的均匀多电平再生转移性能,使其更适合高频谱效率的长距空分复用系统和任意电平数的PAM信号再生.此外,该方案也能够扩展到波长域,有效提高光通信系统的传输容量.     

地下化学爆炸地运动信号关联探索

分析了弹性区域中应力传播的波动方程,说明该应力传播过程可以使用线性系统模型进行描述。根据系统辨识领域的脉冲响应方法,建立了应力测点的脉冲序列与源函数和响应序列之间的关系。在此基础上,建立了各测点间应力序列之间的关联响应模型,给出了采用神经网络的自适应优化方法求解关联参数的方法,并采用某次黄土介质中化学爆炸的实验数据进行了验证。将该模型用于测点数据的预测,预测值和实测值之间的误差很小。这表明,各测点间存在与测量数据无关的客观联系,仅由实验中爆炸源、测点位置和地介质力学参数分布等所决定。     

非线性脉冲差分方程解的稳定性

应用不等式估值法讨论了非线性脉冲时滞差分方程解的性质,并得到它的解的一致稳定性的一些充分条件.     

X射线对CCD噪声影响的分析及滤波方法研究

通过实验分析了X射线对CCD的影响以及射线噪声的特点 ,并针对这种噪声的性质提出了菱形均值滤波器。经过计算机仿真滤波实验和实际应用 ,与递归与非递归中值滤波器作了对比 ,表明该滤波器不但能有效滤除脉冲噪声 ,而且能够较好地保持图像边缘和细节。     

Multi-user cognitive radio network resource allocation based on the adaptive niche immune genetic algorithm

Multi-user cognitive radio network resource allocation based on the adaptive niche immune genetic algorithm is proposed, and a fitness function is provided. Simulations are conducted using the adaptive niche immune genetic algorithm, the simulated annealing algorithm, the quantum genetic algorithm and the simple genetic algorithm, respectively. The results show that the adaptive niche immune genetic algorithm performs better than the other three algorithms in terms of the multi-user cognitive radio network resource allocation, and has quick convergence speed and strong global searching capability, which effectively reduces the system power consumption and bit error rate.     

分离作用RFQ加速器物理特性的研究

RFQ加速器中加速效率随加速能量的增高而下降,为克服由此导致的RFQ能量局限而提出的分离作用RFQ加速结构,在仍保持采用射频四极场聚焦的同时,将加速与聚焦作用相分离. 综述了对它的加速效率、反场问题、腔体及束流特性研究 的结果,初步证实了其可行性及在较高能量区加速效率得到提高,并对正在研制的一台采用了这种分离作用RFQ的1.5MeV组合加速器做了介绍.     

Ammonium Nitrate as an Eco–Friendly Oxidizer for Composite Solid Propellants: Promises and Challenges

Ammonium nitrate (AN) has received attraction globally not only as a nitrogenous fertilizer but also as an oxidizer in gas generators and propellants. Nowadays, great attention is being focused on the development of composite solid propellants with green oxidizers in realizing eco–friendly combustion products. The ammonium perchlorate (AP), which is the work horse oxidizer in composite propellant, needs replacement due to its environmental and human health issues. In this context, AN is regarded as an alternative to AP because of its easy availability and environmentally friendly chlorine free combustion products. However, AN has its own inherent drawbacks such as hygroscopicity, room temperature phase transition, and low burning rate. Recently, several studies have been focused on its phase stabilization and burning rate modification so as to develop solid propellants with improved properties. The knowledge of thermal characteristics of AN is a crucial factor for its applications in propellants and gas generators. This article details the different aspects of polymorphism, phase stabilization, thermal decomposition, hygroscopicity, specific impulse, and burn rate modification of AN and also addresses ways to overcome the inherent weakness of AN as a propellant oxidizer in formulating an effective propellant composition.     

Thermal neutron polarisation

The basic principle for the production of polarised thermal neutrons is discussed and the choice of various crystal monochromators surveyed. Brief mention of broad-spectrum polarisers is made. The application of polarised neutrons to the study of magnetisation density distributions in magnetic crystals, the dynamic concept of polarisation, principle and use of polarisation analysis, the neutron spin-echo technique are discussed.