Stripping Voltammetric Determination of Uranium Traces in Sea Water Samples: Effect of Surfactants on the Measurements

The variables affecting determination of ultra trace levels of uranium (VI) in aqueous samples by differential pulse cathodic stripping voltammetry using chloranilic acid as the complexing agent have been examined in detail. Effect of organic surfactants on the voltammetric behavior has been studied. Electrochemical impedance measurements reveal the effect of adsorption of different surfactants on the adsorption pre-concentration step of uranium-chloranilic acid complex. Additionally, to better understand the analytical feature of the method, physicochemical aspects of the preconcentration process has been studied. Adsorption of uranium-chloranilic acid complex follows the Langmuir adsorption isotherm. Analysis results on sea water samples from India are reported.     

柔性双段腿的SLIP模型参数敏感性分析

为了反映腿部多段串联的多参数耦合特性,以SLIP(spring loaded inverted pendulum)模型为基础,建立了小腿含有串联线性伸缩弹簧的机器人柔性双段腿动力学模型。通过仿真分析其运动,获得柔性双段腿弹簧刚度、触地角度、虚拟腿长、膝关节角度、质量分布等参数的稳定域。通过对各个参数稳定域进行归一化处理和曲线拟合,获得参数稳定域变化曲线及参数敏感度排序。最后基于ADAMS与MATLAB联合仿真验证了柔性双段腿模型中参数敏感度排序的正确性。     

Characterization of the road surfaces in real time

The main factor in the propagation of traffic noise is the road surface, where the vehicles generate noise due to the contact between tire and pavement, in addition to the noise produced by the engine.     

Electrical Impedance Spectroscopic Study of CNT/Ethylene-alt-CO/Propylene-alt-CO Polyketones Nanocomposite

Impedance spectroscopy was utilized to investigate the dielectric properties, ac conductivity and charge transport mechanisms in propylene-alt-CO/ethylene-alt-CO (EPEC) random terpolymer filled with multi-walled carbon nanotubes (MWCNT) as a function of nanofiller content, frequency, and temperature. Equivalent resistor-capacitor (RC) circuit models were proposed to describe the impedance characteristics of the unfilled terpolymer and the nanocomposite at different temperatures. For the nanocomposites, the ac conductivity tended to be frequency independent at low frequencies. At high frequencies, the ac conductivity increased with frequency. The dc conductivity (i.e., plateau of the ac conductivity at low frequencies) at room temperature increased from 10^?9 (Ω·m)^?1 for the unfilled polymer to l0^?3 (Ω·m)^?1 for the 6 wt% MWCNT/EPEC nanocomposite. At low temperatures, the equivalent RC model for EPEC-0 and EPEC-2 was found to consist of a parallel RC circuit. However, for 6 wt% MWCNT/EPEC nanocomposite, an RC model consisting of an R/constant phase element (CPE) circuit and a resistor in series was required to describe the impedance behavior of the nanocomposite.     

Single‐Walled Carbon Nanotubes in Highly Viscous Media: A Comparison between the Dispersive Agents [BMIM][BF4], L121, and Triton X‐100

Dispersions of single‐walled carbon nanotubes (SWNTs) have been prepared by using the room‐temperature ionic liquid [BMIM][BF₄] (1‐butyl‐3‐methylimidazolium tetrafluoroborate), the triblock copolymer Pluronic L121 [poly(ethylene oxide)₅‐poly(propylene oxide)₆₈‐poly(ethylene oxide)₅] and the non‐ionic surfactant Triton X‐100 (TX100) in the pure state. The size of the SWNTs aggregates and the dispersion degree in the three viscous systems depend on the sonication time, as highlighted by UV/Vis/NIR spectroscopy and optical microscopy analysis. A nonlinear increase in conductivity can be observed as a function of the SWNTs loading, as suggested by electrochemical impedance spectroscopy. The generation of a three‐dimensional network of SWNTs showing a viscoelastic gel‐like behavior above a critical percolation concentration has been found at 25 °C in all the investigated systems by oscillatory rheology measurements.     

Impedance Response of a Thin Film on an Electrode: Deciphering the Influence of the Double Layer Capacitance

The different contributions of the interfacial capacitance are identified in the case of passive materials or thin protective coatings deposited on the electrode surface. The method is based on a graphical analysis of the EIS results to determine both the passive-film capacitance in the high-frequency domain and the double-layer capacitance in the low-frequency domain. The proposed analysis is shown to be independent of the physicochemical origins of the frequency dispersion of the interfacial capacitances which results, from an analysis point of view of the experimental results, in the use of a constant-phase element However, for a correct evaluation of the thin-film properties such as its thickness, the high-frequency data must be corrected for the double-layer contribution. In particular, it is shown that if the double-layer capacitance gives a frequency-dispersed response, it is necessary to correct the high-frequency part for the double-layer constant-phase elements. This is first demonstrated on synthetic data and then used for the determination of the thickness of thin oxide film formed on Al in neutral pH solution.     

Evaluation of nano-slot antenna for mid-infrared detectors

To improve the response performance of superconducting infrared detectors, we propose using a photonic antenna with a micro-detector in conjunction with a nano-structure. In this paper, we report evaluation results that show the basic characteristics of a photonic antenna in the mid-infrared region. The antenna consists of a nano-slot antenna and a thin-film load resistance placed in the center of the antenna. The antennas were designed for operation at approximately several tens of THz by using an electromagnetic simulator. Through measurements of the spectral reflectance characteristics, clear absorptions caused by the antenna properties were observed at approximately 50 THz, and high polarization dependencies were also observed. The results of the simulation qualitatively agreed with the results of the experiment. The effective area of the antenna was also evaluated and was found to be approximately 3.5 μm² at 54 THz.     

Facile Fabrication of Zirconia Modified Screen‐Printed Carbon Electrodes for Electrochemical Sensing of Phosphate

We report here a facile method to immobilize zirconia nanoparticles on a disposable screen‐printed carbon electrode (designated as ZrO₂‐SPCE) for phosphate sensor application. Simply by ultrasonicating a bare SPCE in a ZrO₂ slurry, ZrO₂ nanoparticles can be immobilized effectively on the electrode surface as verified by surface characterization evidences. Using ferricyanide as a redox probe, an increase in the charge transfer resistance (R_ct) of ferricyanide upon adsorption of phosphate on ZrO₂ is used for the determination of phosphate. This ZrO₂‐SPCE phosphate sensor shows a wide linear range up to 1 mM and a detection limit of 1.69 µM (S/N=3). Practical applicability of the ZrO₂‐SPCE is demonstrated by detecting phosphate content in human blood samples.