Electrochemical Recognition of Chiral Molecules with Poly(4‐bromoaniline) Modified Gold Electrode

A poly(4‐bromoaniline) (PBA) film is electrochemically synthesized on a gold electrode for the recognition of amino acids enantiomers. Scanning electron microscopy measurements show that the porous PBA films are made up of nano‐ribbons. At the PBA modified Au electrode differential pulse voltammograms of L ‐ and D ‐glutamic acids not only have very different current densities, but also produce different waveforms, providing an intuitive way to differentiate the two chiral molecules. Similar results are obtained in analyzing L ‐ and D ‐aspartic acids. Control experiments suggest that the observed sensing behavior arises from synergistic interactions between Au and the PBA film, where polymerization at the meta‐position creates a steric structure needed for differentiating chiral molecules.     

EDTA对活性炭的功能化处理及其对炭载Pd催化剂电催化性能的影响

采用乙二胺四乙酸(EDTA)对活性炭进行功能化处理, 研究了其对表面基团、炭载Pd 纳米粒子结构及Pd催化剂电催化性能的影响. 傅里叶变换红外(FTIR)光谱和X射线光电子能谱(XPS)表征表明, EDTA处理在炭表面引入了含氮基团. X射线粉末衍射(XRD)光谱、透射电镜(TEM)和电化学测试结果显示, 活性炭经EDTA处理后, 负载的Pd粒子粒径虽有所增大, 但由于炭载体与Pd粒子相互作用的增强, Pd利用率增加, 催化剂对甲酸氧化的活性和稳定性均显著提高. 电化学阻抗谱(EIS)分析进一步揭示, 甲酸在该催化剂电极上的电氧化反应具有较低的电荷传递电阻.     

Synthesis and performance of electroless Ni–P–TiCN composite coatings on Al substrate

Electroless Ni–P and Ni–P–TiCN composite coatings have been deposited successfully on Al substrates. Scanning electron microscopy (SEM) and energy dispersive X‐ray (EDX) techniques were applied to study the surface morphology and the chemical composition of the deposited films. Moreover, X‐ray diffraction (XRD) proved that Ni–P and Ni–P–TiCN deposits have amorphous structures. The properties of Ni–P–TiCN/Al composite films such as hardness, corrosion resistance and electrocatalytic activity were examined and compared with that of Ni–P/Al film. The results of hardness measurements reveal that the presence of TiCN particles with Ni–P matrix improves its hardness. Additionally, the performance against corrosion was examined using Tafel lines and electrochemical impedance spectroscopy techniques in both of 0.6 M NaCl and a mixture of 0.5 M H₂SO₄ with 2 ppm HF solutions. The results indicate that the incorporation of high dispersed TiCN particles into Ni–P matrix led to a positive shift of the corrosion potential and an increase in the corrosion resistance for all aluminum substrates after their coating with Ni–P–TiCN. In addition, Ni–P–TiCN/Al electrodes showed a higher electrochemical catalytic activity and stability toward methanol oxidation in 0.5 M NaOH solution compared with that of Ni–P/Al. Copyright © 2014 John Wiley & Sons, Ltd.     

改进粒子群算法的自动阻抗匹配技术

由于无线电能传输距离的改变或谐振线圈之间发生偏移、负载改变等多方面的影响使系统的输入阻抗发生变化,导致输入阻抗与射频源内阻不匹配,使传输效率大幅下降。在射频源和发射线圈之间加入阻抗匹配网络可以提高无线电能的传输效率。为了提高阻抗匹配的精度和速度,提出了一种改进的粒子群算法。重点将改进算法和传统算法进行仿真实验比较,证明了改进算法在匹配精度和速度方面的优越性。最后将该算法嵌入到自动阻抗匹配系统中,提高了无线电能的传输效率,同时证明了所提算法的有效性。     

Interactions and corrosion mitigation prospective of pyrazole derivative on mild steel in HCl environment

The effectiveness of 1H?pyrazole?3,5?dicarboxylic acid 5?benzyl ester 3?phenyl ester (PCBPE) as a preventer for deterioration of IS 513 Gr. D steel in 1 M HCl medium is evaluated via weight loss, electrochemical impedance, and polarization techniques. Kinetic and thermodynamic parameters assessed the feasibility of the adsorption process at diverse temperatures. The inhibition action on mild steel has been enhanced with increasing PCBPE concentration. It is found from the polarization studies that PCBPE behaves as mixed type inhibitor in HCl medium. The adsorption process of PCBPE on mild steel surface from acid environment is favoured Langmuir adsorption isotherm. The shielding efficiency of PCBPE has been enhanced at elevated concentrations, and it has been diminished at amplified temperatures. The Atomic Force Microscope (AFM), Scanning Electron Microscope (SEM), and Energy Dispersive Spectrum (EDS) were used to establish a surface characterization of metal specimens. A quantum chemical analysis of electron density distributions in the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) demonstrated how the inhibitor undergoes adsorption on mild steel in 1 M HCl. All experimental findings substantiate the corrosion mitigation performance of PCBPE on mild steel in acidic environments.     

Effective biosorption of arsenic from water using La(III) loaded carboxyl functionalized watermelon rind

Arsenic is highly toxic and carcinogenic element that mainly enters into our body through drinking water and caused adverse effect even at low concentration. A new type of cation exchanger is developed from waste biomass of watermelon rind after increasing the carboxyl functional groups by saponification. Saponified Watermelon Rind (SWR) was further loaded with La(III) to attenuate the contamination of As(III) from water. Characterization of biosorbent was performed using Fourier Transform Infra-Red (FTIR) spectroscopy, Field emission Scanning Electron Microscopy (Fe-SEM,) Energy Dispersive X-ray (EDX) spectroscopy and zeta potential analysis. Arsenic speciation of sorption product through X-ray photoelectron spectroscopic (XPS) analysis revealed that As(III) is partially converted into As(V) during biosorption process. The biosorption tests for As(III) were explored under different operating conditions. La(III)-SWR towards As(III) biosorption was best described by Langmuir biosorption isotherm and pseudo second order kinetic model. At a pH of 12.08, the optimum biosorption capacity was found to be 37.73 ± 0.12, 48.78 ± 0.09, 62.50 ± 0.11 mg/g, respectively at temperatures 298 K, 303 K and 308 K. The existance of chloride and nitrate showed negligible interference whereas sulphate and phosphate significantly inhibits As(III) biosorption. Thermodynamic study showed spontaneous and endothermic nature As(III) biosorption onto La(III)-SWR. The sorbed As(III) was eluted almost completely using 2 M NaOH. The findings of this study insinuated that La(III)-SWR biosorbent investigated in this study can be a low cost, environmentally benign and eco-friendly material for the treatment of aqueous solution polluted with arsenic ions.     

Anti-atherosclerotic activity of Betulinic acid loaded polyvinyl alcohol/methylacrylate grafted Lignin polymer in high fat diet induced atherosclerosis model rats

Betulinic acid is one such natural pentacyclic triterpenoid compound, holding various pharmacological properties but its poor bioavailability is the only limitation. One of the biological macromolecules such as Lignin is a plant-derived aromatic, eco-friendly and low-cost polymer that certainly self-assembles into nano-sized colloids. Therefore, onto the current investigation, we increased the bioavailability of betulinic acid by coating on to a nanopolymer prepared with poly vinyl alcohol, lignins and methyl acrylate. Betulinic acid loaded polyvinyl alcohol/ethylacrylate grafted Lignin polymer (PVA/Lig-g-MA) nanoformulation was characterized using FTIR, XRD, SEM and TEM analysis and also the drug entrapment, in vitro drug releasing capacity was done to examine the efficiency of the nanoformulation of a drug. The MTT assay was evaluated the cytotoxicity of synthesized nanoformulation against normal endothelial cells HUVEC and HAPEC to confirm the side effects of the drug. The anti-atherosclerotic property of the nanoformulation was ascertained in both in vitro condition (with HUVEC and HPAEC) and in vivo studies (with Wistar rats). As a result, the characterization studies and in vitro studies clearly confirmed the Betulinic acid loaded PVA/Lig-g-MA nanoformulation is an ideal nanopolymer and it doesn’t cause any cytotoxic effect in normal endothelial cells. It also decreased the lipopolysaccharides induced inflammation through the down-regulation of NFκB and MAP/JNK signaling molecule expressions. Following in vivo results confirmed the synthesized nanoformulation effectively decreased the hyperchlostremia, inflammation and vasoconstriction, which induced over high fat diet. The results of histopathological analysis of cardiac tissues also confirmed the cardioprotective role of synthesized nanoformulation. Overall, both the in vitro and in vivo studies authentically proven the Betulinic acid loaded PVA/Lig-g-MA nanoformulation would be a potent cost effective anti-atherosclerotic nanodrug.     

太赫兹波段Smith-Purcell辐射的介质加载光栅高频特性

提出了一种用于Smith-Purcell效应器件的介质加载光栅慢波结构,通过研究该结构的注-波互作用过程,推导出带电子注的色散方程,并数值求解出波的线性增长率.利用色散方程,结合电磁场传播的边界条件,推导出Smith-Purcell效应振荡器工作所需的起振电流.详细研究了高频结构长度、电子注主要参数和介质相对介电常数对起振电流的影响,并与普通金属光栅结构进行了比较.结果表明:保持其他参数不变时,高频结构长度越短,起振电流越大;保持高频结构参数不变时,起振电流随电子注厚度和注-栅距离的增大而增大,随电子注电压的增大而减小;与金属光栅相比,介质的引入提高了注-波互作用的增长率,有效减小了振荡器的起振电流.理论计算结果与软件CHIPIC的模拟结果比较符合.     

阻抗测量法及梁的阻抗应答分析

提出了利用压电陶瓷的阻抗测量法的概念,即用压电陶瓷作为驱动源产生动态阻抗信息.测试系统由阻抗分析仪、计算机、压电陶瓷片、铝梁组成.实验将铝梁作为测试对象,在其上粘贴压电陶瓷,通过对阻抗应答、振动模型和压电陶瓷片的粘贴位置的分析,研究梁的阻抗频率特性.实验结果表明,利用阻抗法,容易得到构造物的频率响应特性,应答分析也简单.     

Synthesis and Characterization of Flexible Hydrogel Electrodes for Electrochemical Impedance Measurements of Protective Coatings on Metal Sculptures

A novel conductive anionic hydrogel was synthesized for use as a solid electrolyte for electrochemical impedance spectroscopy (EIS) characterization of the barrier properties of protective coatings on outdoor metalworks, such as bronze sculptures. The AMPS‐co‐PAA hydrogel was soaked in a variety of aqueous salt solutions and characterized by swelling capacity and conductivity in order to determine the most appropriate gel/liquid electrolyte combination for use on culturally significant objects. K₂PIPES‐equilibrated hydrogels were selected as the preferred electrodes for this particular application and were used to measure the impedance of a coated substrate, yielding spectra similar to those from standard liquid cells.