交流示波极谱滴定法测定盐酸利多卡因

本文报道了用交流示波极谱滴定法测定盐酸利多卡因的一种方法。在KCI的底液中,用KOH标准溶液进行直接滴定。到达等量点时,示波极谱图上出现一个切口,指示终点到达。方法简便快速,终点灵敏,结果准确。     

固定pH值法测定盐酸麻黄碱含量

本文根据固定ｐＨ法测定极弱酸碱原理，直接用ＮａＯＨ溶液滴定盐酸麻黄碱注射液中盐酸麻黄碱至某一固定ｐＨ值。通过ＮａＯＨ溶液消耗体积与盐酸麻黄碱含量成正比关系，用单标准法求得盐酸麻黄碱的含量。本法在滴定过程中不需确定化学计量点，不需标定滴定剂准确浓度，具有简单、快速、试剂消耗少、结果准确等优点。     

Sonocatalytic degradation of tetracycline hydrochloride with CoFe2O4/g-C3N4 composite

In this work, different mass percent ratios of CoFe₂O₄ coupled g-C₃N₄ (w%-CoFe₂O₄/g-C₃N₄, CFO/CN) nanocomposites were integrated through a hydrothermal process for the sonocatalytic eradication of tetracycline hydrochloride (TCH) from aqueous media. The prepared sonocatalysts were subjected to various techniques to investigate their morphology, crystallinity, ultrasound wave capturing activity and charge conductivity. From the investigated activity of the composite materials, it has been registered that the best sonocatalytic degradation efficiency of 26.71 % in 10 min was delivered when the amount of CoFe₂O₄ was 25% in the nanocomposite. The delivered efficiency was higher than that of bare CoFe₂O₄ and g-C₃N₄. This enriched sonocatalytic efficiency was credited to the accelerated charge transfer and separation of e⁻-h⁺ pair through the S-scheme heterojunctional interface. The trapping experiments confirmed that all the three species i.e. ^•OH, h⁺ and ^•O₂⁻ were involved in the eradication of antibiotics. A strong interaction was shown up between CoFe₂O₄ and g-C₃N₄ in the FTIR study to support charge transfer as confirmed from the photoluminescence and photocurrent analysis of the samples. This work will provide an easy approach for fabricating highly efficient low-cost magnetic sonocatalysts for the eradication of hazardous materials present in our environment.     

Inversion twinning in a second polymorph of the hydrochloride salt of the recreational drug ethylone

A second polymorph of the hydrochloride salt of the recreational drug ethylone, C₁₂H₁₆NO₃⁺·Cl⁻, is reported [systematic name: (±)‐2‐ethylammonio‐1‐(3,4‐methylenedioxyphenyl)propane‐1‐one chloride]. This polymorph, denoted form (A), appears in crystallizations performed above 308 K. The originally reported form (B) [Wood et al. (2015). Acta Cryst. C 71 , 32–38] crystallizes preferentially at room temperature. The conformations of the cations in the two forms differ by a 180° rotation about the C—C bond linking the side chain to the aromatic ring. Hydrogen bonding links the cations and anions in both forms into similar extended chains in which any one chain contains only a single enantiomer of the chiral cation, but the packing of the ions is different. In form (A), the aromatic rings of adjacent chains interleave, but pack equally well if neighbouring chains contain the same or opposite enantiomorph of the cation. The consequence of this is then near perfect inversion twinning in the structure. In form (B), neighbouring chains are always inverted, leading to a centrosymmetric space group. The question as to why the polymorphs crystallize at slightly different temperatures has been examined by density functional theory (DFT) and lattice energy calculations and a consideration of packing compactness. The free energy (ΔG) of the crystal lattice for polymorph (A) lies some 52 kJ mol⁻¹ above that of polymorph (B).     

2-羟丙基-β-环糊精与二茂铁衍生物超分子胶束通过氧化还原响应控制药物释放

合成了新型的具有长链的二茂铁衍生物(P-Fc),并将其包络在2-羟丙基-β-环糊精(HP-β-CD)的空腔中,自组装形成超分子囊泡,并通过FTIR、1 HNMR、SEM和CV曲线对其进行结构形貌表征;分别以罗丹明6G(R6G)、盐酸阿霉素(DOX)作为药物,实现了R6G、DOX在囊泡中的成功装载。并通过加入氧化剂,将二茂铁氧化成二茂铁盐,将囊泡破坏,实现了 R6G 和 DOX 的快速定向释放,其药物装载量分别为6.89和39.06μg/mg,最大释放率分别为73.7%和88.2%。     

Crystalline and spectroscopic characterization of poly(2-aminoethyl methacrylate hydrochloride) chains grafted onto poly[(R)-3-hydroxybutyric acid]

The present study is aimed to investigate the degree of crystallinity of poly(3-hydroxybutyrate) P(3HB) grafted with poly(2-aminoethyl methacrylate hydrochloride) (PAEMA) chains using WAXS, micro Raman, and FTIR spectroscopy. The samples were obtained by radiation induced graft polymerization of the monomer in the substrate using different solvents for comparison. The results of crystallinity are consistent with those obtained of lower crystallinity in grafting copolymer relative to the substrate P(3HB). The low crystallinity is directly related to the increase of the degree of grafting, meaning that although the P(3HB) amorphous region is grafted, the crystalline zone is also affected in some extent by the grafting process and the environment of the new molecule. Three different methods were surveyed to determine the variation of crystallinity degree with the grafting degree. It is shown that all methods provide linear relationships between these variables, but WAXS method was found more acceptable than the others (FTIR and Raman). A detailed characterization of the vibrational bands characteristic of amorphous and helical crystalline structure of the grafting copolymers are also highlighted.     

Simultaneous determination of naphazoline and pyridoxine in eye drops using excitation–emission matrix fluorescence coupled with second-order calibration method based on alternating trilinear decomposition algorithm

A novel method is developed for the direct determination of naphazoline hydrochloride(NAP) and pyridoxine hydrochloride(VB6) in commercial eye drops. By using excitation–emission matrix(EEM)fluorescence coupled with second-order calibration method based on the alternating trilinear decomposition(ATLD) algorithm, the proposed approach can achieve quantitative analysis successfully even in the presence of unknown and uncalibrated interferences. The method shows good linearity for NAP and VB6 with correlation coefficients greater than 0.99. The results were in good agreement with the labeled contents. To further confirm the feasibility and reliability of the proposed method, the same batch samples were analyzed by multiple reaction monitoring(MRM) based on LC–MS/MS method.T-test demonstrated that there are no significant differences between the prediction results of the two methods. The satisfactory results obtained in this work indicate that the use of the second-order calibration method coupled with the EEM is a promising tool for industrial quality control and pharmaceutical analysis due to its advantages of high sensitivity, low-cost and simple implementation.