聚吡咯衍生物的合成及液晶性能

系统论述了新型导电功能性液晶聚合物3-和N-液晶基元取代聚吡咯的合成和液晶行为。指出通过化学氧化聚合、电化学氧化聚合和脱卤缩合聚合可以获得液晶性聚吡咯衍生物。它们均显示热致液晶行为，且多数呈现近晶液晶相，少数呈现向列液晶相，有些具有2种近晶相，有些具有单变液晶性。N-液晶基元取代聚吡咯比3-位取代聚吡咯具有较高的液晶稳定性。较长的亚甲基间隔和极性的介晶基团能够使N-取代聚吡咯具有较大的液晶微区和稳定的液晶相。N-取代液晶聚吡咯在摩擦力的作用下还可以诱发单轴取向。这种热致液晶性聚吡咯衍生物的研究成功有希望克服聚吡咯难以成型加工的巨大障碍。     

Scaling properties of ℤ k- 1 actions on the circle

We derive universal scaling properties for ^k–1 actions on the circle whose generators have rotation numbers algebraic of degreek. As fork=2 these properties can be explained for arbitraryk in terms of a renormalization group transformation. It has at least one trivial fixed point corresponding to an action whose generators are pure rotations. The spectrum of the linearized transformation in this fixed point is analyzed completely. The fixed point is hyperbolic with a (k–1)-dimensional unstable manifold. In the casek=2 the known results are therefore recovered.     

A facile synthesis of aliphatic polybenzoxazoles from a bis(o-aminophenol) or its hydrochloride and aliphatic dinitriles

A facile one-step method for the synthesis of aliphatic polybenzoxazoles has been developed. Thus, a series of aliphatic polybenzoxazoles having inherent viscosities of 0.2–0.7 dL/g in concentrated sulfuric acid were successfully synthesized by the melt polycondensation of alipatic dinitriles with 4,4′-diamino-3,3′-dihydroxybiphenyl (AHB) or its hydrochloride (AHB–HCl) with the elimination of ammonia or ammonium chloride, respectively. Monomer AHB–HCl was more reactive than the parent AHB, thereby affording higher molecular weight polybenzoxazoles in a shorter reaction time. The aliphatic polybenzoxazoles having 6–10 methylene units were highly crystalline with melting temperatures in the range of 187–308°C, which were stable up to 400°C in a melt state in nitrogen. © 1994 John Wiley & Sons, Inc.     

羟基化合物及其葡醛酸苷化学结构与RP—HPLC保留行为相关性研究

采用体外孵育生物合成方法获得羟基化合物葡醛酸苷系列化合物，并对其反相高效液相色谱保留行为及底物与其葡醛酸结合物保留行为相关性进行了研究，建立了相应的结构－色谱保留行为相关性方程及葡醛酸苷类代谢物保留行为的预测方法。将ＱＳＲＲ研究扩展到药物代谢物领域，对药物Ⅱ相葡醛酸化代谢产物的ＨＰＬＣ分析提供了帮助。     

丙烯酸酯接枝炭黑无皂水性涂料的性能研究

旋转粘度计研究了丙烯酸酯接枝炭黑无皂水性涂料的流变性能，并考察了着色涂料的冻融及贮存稳定性。接枝炭黑争散于无皂水性涂料中形成的着色涂料具有良好的综合性能。     

Investigation on property and mechanism of redox wave of methylhesperidine at Hg electrode

The voltammetric behaviors of methylhesperidine (MH) were studied by means of linear sweep voltammetry, cyclic voltammetry and normal pulse voltammetry. In the Brit-ton-Robinson buffer solutions with pH values from 2.05 to 6.37, MH could yield three reduction waves PC1,PC2 and PC3. PC1 wave is an adsorptive pre-wave. PC2 wave is an irreversible reduction of pre-protonated MH involving one electron and one proton. PC3 wave is an irreversible wave of reduction species radical of MH involving one electron.     

有机小分子染料和聚阳离子分子超薄膜的制备及其摩擦学性能研究

制备了以有机小分子染料酸性红 1 8为阴离子、以聚烯丙基氯化铵和聚乙烯亚胺为聚阳离子的分子沉积膜 ,用紫外可见分光光度计、接触角测定仪和椭圆偏振光测厚仪对所制备的超薄膜进行了表征 .用DF PM型动 静摩擦系数精密测定装置考察了超薄膜的摩擦学性能 ,采用扫描电子显微镜对薄膜的磨痕表面进行了观察 .结果表明 ,所制备的超薄复合沉积膜具有良好的减摩和耐磨性能     

Metal complexes of a homopolymer system containing diethanolamine side group: synthesis and dielectrical behaviors

In this work, 4-diethanolaminomethyl styrene (DEAMSt) monomer was prepared by modification of 4-chloromethyl styrene with diethanolamine. The homopolymerization of styrene modificated was carried out by free radical polymerization method at 60?°C in presence of 1,4-dioxane and AIBN. The metal complexes were prepared by reaction of the homopolymer used as ligand P(DEAMSt)L^l and Ni(II), Co(II) metal ions in presence of ethanol and dilute NaOH at 65?°C for 48?h in pH 6.

The structure of modificated monomer, homopolymer used as ligand and polymer-metal complexes were characterized by (FT-IR), ¹H-NMR, ¹³C-NMR, Raman spectroscopy tecniques, elemental analysis, SEM, XRD and magnetic measurements. Their geometric structures according to magnetic measurements of Co(II) and Ni(II) complexes were estimated that have a tetrahedral structure. P(DEAMSt)L^l polymer has a transition state between amorphous and crystalline, whereas metal complexes (Co(II) and Ni(II) are with a large crystal structure. The molecular weight of P(DEAMSt)L¹ homopolymer was determined by gel permeation chromatography (GPC). The glass transition temperature (Tg) of homopolymer was measured by differantial scanning calorimeter (DSC). The thermal behaviors of both ligand and polymer-metal complexes were investigated by thermogravimetric analysis (TGA) and (DTA). The results obtained were compared with each other. Then, the dielectrical measurements (dielectric constant, dielectric loss and conductivity) of the ligand and polymer-metal complexes were investigated as a function of temperature and frequency. The activation energies (Ea) of the ligand and metal complexes were determined from the conductivity measurements.     

COMPATIBILITY AND PHASE BEHAVIOR OF PS/SBR BLEND Ⅰ. EFFECT OF MOLECULAR WEIGHT OF PS

The results of this study reveals not only the sensitivity of the compatibility of PS with SBR to the molecular weight (MW) of PS and temperature, but also some other interesting characteristics, i. e., unusual morphology change during the process of mixing with increase in temperature of specimen preparation observed under optical microscope and double-peak UCST curves for three blends with PS of low MW from DSC data. Acording to the amount of inward shift of the component T_g's and the broadening of the transition regions, it may be said that this polymer pair is compatible only when the MW of PS is low, and even then there still exists micro-heterogeneity.     

Morphology and thermal properties of a PC/PE blend with reactive compatibilization

Reactive compatibilization of immiscible polymers is becoming increasingly important and hence a representative study of a polycarbonate/high density polyethylene (PC/HDPE) system is the focus of this paper. A grafted copolymer PC‐graft‐ethylene‐co‐acrylic acid (PC‐graft‐EAA) was generated as a compatibilizer in situ during processing operation by ester and acid reaction between PC and ethylene‐acrylic acid (EAA) in the presence of the catalyst dibutyl tin oxide (DBTO). As the polyethylene (PE) matrix does not play any part during the synthesis of the copolymer and since PC and EAA are also immiscible, to simplify the system, the influence of this copolymer formation at the interface between PC and EAA on rheological properties, phase morphology, and crystallization behavior for EAA/PC binary blends was first studied. The equilibrium torque increased with the DBTO content increasing in EAA/PC blends on Haake torque rheometer, indicating the in situ formation of the graft copolymer. Scanning electron microscopy (SEM) studies of cryogenically fractured surfaces showed a significant change at the distribution and dispersion of the dispersed phase in the presence of DBTO, compared with the EAA/PC blend without the catalyst. Differential scanning calorimetry (DSC) studies suggested that the heat of fusion of the EAA phase in PC/EAA blends with or without DBTO reduced with the formation of the copolymer compared with pure EAA. Then morphological studies and crystallization behavior of the uncompatibilized and compatibilized blends of PC/PE were studied as functions of EAA phase concentration and DBTO content. Morphological observations in PC/PE blends also revealed that on increasing the EAA content or adding the catalyst DBTO, the number of microvoids was reduced and the interface was intensive as compared to the uncompatibilized PC/PE blends. Crystallization studies indicated that PE crystallized at its bulk crystallization temperature. The degree of crystallinity of PE phase in PC/PE/EAA blends was also reduced with the addition of EAA and DBTO compared to the uncompatibilized blends of PC/PE, indicating the decrease in the degree of crystallinity was more in the presence of PC‐graft‐EAA. Copyright © 2007 John Wiley & Sons, Ltd.