Determination of the second step microstructure for superhydrophobic surfaces

A selection of suitable microstructures is critical to fabrication and properties of superhydrophobic surfaces (SHS). In this study, we introduce a three‐dimensional droplet model to thermodynamically analyze the superhydrophobic properties for the purpose of determining the second step of a two‐step microstructure suitable for the SHS based on the common models within the reach of the existing macro‐machining technology. It is found that a sinusoidal microstructure is the most suitable, followed by a cone frustum and a prism in the composite wetting state, as well as the transition from hydrophilic to hydrophobic depends basically on the solid fraction rather than non‐determinative surface microscopic topography. The predictions of the model are found in quite good agreement with the experimental observations. This study will facilitate fabrication of the SHS on how to select the suitable morphology. Copyright © 2012 John Wiley & Sons, Ltd.     

N330炭黑增强天然橡胶材料力学性能的实验研究

为了研究炭黑对橡胶材料力学性能的影响,对9种不同体积含量的炭黑填充橡胶材料进行了准静态力学实验研究。利用循环拉伸加卸载实验分析了炭黑对橡胶Mullins效应及能量损耗的影响,通过单轴拉伸实验研究了炭黑对橡胶材料刚度和起始模量的影响,采用多步松弛拉伸加卸载实验研究了炭黑对橡胶材料应力行为的应变历史相关性的影响。实验结果表明:炭黑填充量越高,橡胶材料的刚度越大,初始模量越大,Mullins效应也越明显;随着炭黑填充量的增加,橡胶在加卸载循环中所产生的迟滞损耗、Mullins效应相对能量损耗以及残余应变都呈现出非线性增长趋势;随着炭黑填充量的升高,橡胶在加卸载过程中的应力松弛现象越明显,其平衡态迟滞损耗以及与时间相关部分的迟滞损耗也越大。     

显式模拟类橡胶材料Mullins效应滞回圈

通过显式、直接的方法提出一个多轴可压缩应变能函数,用来模拟类橡胶材料在加载——卸载作用下,由于Mullins效应而产生的应力——应变滞回圈. 本文的创新点在于将表征能量耗散的变量引入到应变能函数.新的弹性势具有以下两个特点:第一,在加载情况下,新引入的变量不会对弹性势产生任何影响,因此,只要给出合适的形函数显式表达,3个基准实验,包括单轴拉伸和压缩,等双轴拉伸和压缩,以及平面应变,都可精确模拟;第二,新引入的变量在卸载情况下将被激活.在不同的卸载应力下,变量将发生改变,从而影响弹性势,使其最终产生不同的应力——应变关系卸载曲线,与对应的加载曲线共同构成应力——应变滞回圈.通过对Mullins效应实验数据进行分析和研究,得出了卸载形函数在不同卸载应力下变化的规律,并预测不同卸载应力下的应力——应变关系.最后,我们将得到精确匹配实验数据的数值模拟结果,从而证明本文方法不仅可以精确匹配至少3个基准实验,还可以模拟和预测类橡胶材料在加载——卸载作用下由于Mullins效应而产生的滞回圈.      

Zero—field—cooled and field—cooled magnetizations and magnetic susceptibility of itinerant ferromagnet SrRuO3

Zero-field-cooled(ZFC) magnetization,field-cooled(FC) magnetization,ac magnetic susceptibility and major hysteresis loops of itinerant ferromagnet SrRuO3 have been measured at magnetic ordering temperatures ranging from 5 to 160K.An empirical model is proposed to calculate the measured ZFC magnetization.The result indicates that the calculated ZFC magnetization compares well with the measured one.Based on the generalized Preisach model.both the ZFC and FC curves are reproduced by numerical simulations.The critical temperature and critical exponents are determined by measuring the ac magnetic susceptibility in different bias magnetic fields at temperatures in the vicinity of the point of phase transition.     

利用光杠杆法测量金属丝的弹性滞后环

利用大学物理实验中的光杠杆法测定金属丝弹性模量的原理和设备,对具有超弹性的NiTi丝的弹性滞后环进行了测定结果表明,此种方法可以很好地测定NiTi丝的弹性滞后环,而且操作简单使用方便,是一种非常有效的测定金属细丝弹性滞后环的方法.     

橡胶支座水平剪切弹塑性力学性能试验研究

通过对铅芯橡胶支座剪切弹塑性力学性能试验,发现铅芯橡胶支座的滞回曲线与加载时程密切相关,在同一水平应变下,水平剪切刚度随加载次数的增多有所减小,最后趋于稳定;在不同应变下,水平剪切刚度随应变的增大而减小.试验还表明铅芯橡胶支座不仅在大应变存在着小应变滞回特性,而且在小应变也存在着小应变滞回特性.     

Influence of Co amount on the efficiency of energy absorption of Fe-Co ferrite nanoparticles

We present the chemical synthesis, structural characterization and efficiency of AC field energy absorption of Fe-Co ferrite particles sized between 35 and 100 nm and containing different cobalt amounts up to 3 wt%. Dynamic magnetic measurements in an AC field with frequency of 430 Hz and amplitude of up to 1200 Oe were performed for both solid and liquid dispersions of obtained particles. The energy absorption per one field cycle in function of the field amplitude and Co content was always bigger in liquid systems, under the same conditions, than in solid systems. The obtained results are of significance for the technology of low-frequency ferromagnetic hyperthermia of tumors.     

Highly Axial Magnetic Anisotropy in a N3O5 Dysprosium(III) Coordination Environment Generated by a Merocyanine Ligand

A spiropyran‐based switchable ligand isomerizes upon reaction with lanthanide(III) precursors to generate complexes with an unusual N₃O₅ coordination sphere. The air‐stable dysprosium(III) complex shows a hysteresis loop at 2 K and a very strong axial magnetic anisotropy generated by the merocyanine phenolate donor.     

Energy dissipation of a ring-like metal rubber isolator

Metal rubber （MR） is a kind of homogeneous poroelastic damping material made of metal wire. In this paper, by ana- lyzing the forces on the MR isolator and the MR element, the hysteresis loops of the force and deformation are studied and verified by experiments. The results show that the force and displacement hysteresis loop of the MR isolator is described by the force and deformation hysteresis loops of the MR elements. In addition, the relationship between the energy dissipation coefficient of the MR element and that of the MR isolator is derived. The energy dissipation coefficient is programmed and calculated by MATLAB using experimental data, and the results are compared with the theoretical value. It is the basis for the design and applied research of the MR isolator in a future study.     

具有滞环的非线性非自治电路唯一稳态

利用向量比较原理，得到确定具有滞环的非线性非自治电路的唯一稳态条件，结果表明，具有滞环的非线性非自治电路的唯一稳态，可以用一个常数矩阵的HURWITZ条件来决定，其结果扩展巳有的经典结果。