聚丙烯/POE共混组成对材料断裂行为的影响

采用基本断裂功(EWF)方法对聚丙烯(PP)/聚烯烃弹性体(POE)共混物的注射双边缺口拉伸试样的断裂行为进行了研究,比较了不同POE含量对共混物各断裂参数的影响.结果表明,PP和用量为5phr POE的共混物都可完全满足EWF方法的要求,共混物的断裂韧性-比基本断裂功we,较PP有显著提高;POE用量为10phr以上的共混物则出现明显的成颈现象而限制了EWF方法的应用;PP和各种POE用量的共混物都得到了其屈服所需要的比基本断裂功we,y和比塑性功β′wp,y.     

混合控制下腐蚀过程的电化学动力学参数测定

通过恒电量脉冲技术测定Q235碳钢在天然海水中腐蚀过程的电化学动力学参数. 分别利用不同极化幅度的恒电量瞬态响应分析获得极化电阻和Tafel斜率, 进而计算腐蚀电流icorr. 并对比了恒电量方法和考虑扩散影响的稳态极化曲线方法的测量结果. 结果表明, 采用恒电量强极化积分算法(CPSI)获得的Tafel斜率与极化曲线方法有很好的相关性. 同时, CPSI测定的阴极Tafel斜率符合氧还原反应的理论Tafel斜率值. 因此, 采用恒电量瞬态响应测量大大减小了浓差极化的影响, 有利于快速测定电荷传递和扩散传质混合控制下腐蚀过程的电化学动力学参数.     

高分辨电感耦合等离子体磁质谱法测定含铜不锈钢中痕量磷

作者通过试验,用电感耦合等离子体磁质谱(HR-ICP-MS)测定含铜不锈钢中磷含量时,采用高分辨率模式,选择分辨率为4000,在此条件下磷峰可与干扰双原子分子或离子的峰分开。又通过以含铁基的磷标准溶液优化了气体流量和离子透镜的参数,使磷的信号值提高至3×105cps。而加入45Sc作为内标元素又可显著提高测定的稳定性。分别用不锈钢样品和纯铁粉作基体,加入标准溶液制作标准曲线。结果表明:两种方法的线性均较好,分别测得实际样品的结果及其相对标准偏差也基本一致。但两种方法的检出限(3s)不同,前者为1.0μg·g^-1,后者为0.18μg·g^-1。所提出方法的样品处理过程如下:称取样品0.10g置于消解罐中,加入盐酸溶液2mL及硝酸溶液1mL,待剧烈反应缓解时,将消解罐加盖并置于微波消解仪中,于100℃消解10min,升温至200℃继续消解20min。冷却后将溶液转移至100 mL石英容量瓶中,加入0.2mg·L^-1钪内标溶液1mL,加水至刻度,摇匀。此溶液在仪器工作条件下进行HR-ICP-MS测定。对含磷51μg·g^-1的含铜不锈钢,按本方法测定所得结果的相对标准偏差(n=10)小于4%。应用本方法分析了7种标准物质或已知样品(包括低合金钢、含铜不锈钢、高温合金),并同时用ICP-AES进行校对分析。结果表明,本方法与ICP-AES的测定结果基本一致。但本方法的结果与标准物质的认定值更接近,而且对低含量磷(9μg·g^-1)也可很好测定。     

教学评一致性视域下金属单元复习课的实践*

分析金属知识在中考和教材中的地位,针对当前单元复习教学中存在的问题,依据教学评一致性原则,将“金属知识”的单元复习在“订书钉”为主要线索的探究活动中展开,以此激发学生的学习兴趣,优化学生单元知识结构,发展学生分析问题、解决问题的能力,同时提高学生对学科价值的认识。     

化学能转化成电能的实验设计

以常见的铜锌原电池反应为例,设计了一组对比实验装置,即化学反应装置与原电池装置。以化学反应装置中的能量变化为依据,展示了化学反应中释放出的能量具体形式为“热”与“功”;通过与原电池装置的比较,证明原电池实验装置中的“热”转化为了电能。     

铈改善TP347H钢的高温持久性能研究

以超临界锅炉管用耐热奥氏体不锈钢TP347H为研究对象,加入0%~0.3%(质量分数)的Ce,用25 kg真空感应炉在氩气保护下熔炼,研究了Ce对TP347H钢高温持久性能等的影响。结果表明:当TP347H中加入Ce量为0.005%时,在750℃,120 MPa时持久寿命达到最大297 h,比未加Ce时提高48%,随着Ce添加量的进一步增加持久寿命逐渐下降,Ce添加量≥0.15%时开始趋于稳定;Ce的添加将导致TP347H钢在高温固溶处理时δ铁素体的形成,Ce的合适添加量约为0.005%~0.03%。     

Enrichment of HDL proteome and phospholipidome from human serum via IMAC/MOAC affinity

High-density lipoproteins (HDLs) have anti-inflammatory and antioxidant properties and are potentially cardio-protective. Defective HDL function is caused by alterations in both the proteome and lipidome of HDL particles. As potential biomarkers, the development of analytical methods is necessary for the enrichment of HDLs. Therefore, a method for selective enrichment of HDLs using immobilized metal ion affinity chromatography (IMAC) and metal oxide affinity chromatography (MOAC) is presented. SPE-based isolation of HDLs from whole serum is adopted as an alternative to traditional ultracentrifugation methods followed by SDS–PAGE. The enrichment mechanism relies on isoelectric points of lipoproteins and metal oxide. Negatively charged lipoprotein particles interact with positively charged metal oxides and IMAC affinity, which acts as a cation. Identified proteins from HDL through MALDI–MS analysis are apo AI, AII, AIV, CI, CIII, E, J, M, H, serum amyloid A and other nonapoproteins that are part of HDL particles and perform cellular functions. This serum-based proteomics approach gives insight into the functional role of HDL. HDL-associated phospholipids have also been analyzed by LDI–MS. Results suggest that the adopted analytical strategy is a feasible idea to extract lipoproteins from serum. A comparative study of healthy and diseased samples using this approach will provide valuable information in future.     

Enhanced electronic and nonlinear optical responses of C24N24 cavernous nitride fullerene by decoration with first row transition metals; A computational investigation

The electronic (energy gap and work function) as well as electrical properties (dipole moment, polarizability, and first hyperpolarizabilities) of the first-row transition metals decorated C₂₄N₂₄ cavernous nitride fullerene were explored using DFT calculations. The transition metals are decorated at N4 cavity of C₂₄N₂₄ fullerene. According to our spin polarized computations, the most stable spin state monotonically increases to sextet for Mn@C₂₄N₂₄ and thereafter dropped off gradually to singlet state for Zn@C₂₄N₂₄ system. The findings demonstrate that transition metals can remarkably decrease the HOMO-LUMO energy gap and work function values up to 63% and 21% of bare C₂₄N₂₄, respectively. As can be seen, when the Sc and Ti metals are located above the N4 cavity of fullerene, systems of enhanced static hyperpolarizabilities (β₀) are delivered. These findings might provide an effective strategy to design high performance eletcro-optical materials based on carbon- nitride fullerene.     

Work function and negative electron affinity of ultrathin barium fluoride films

Thin films of barium fluorides with different thicknesses were deposited on GaAs substrate by electron beam evaporation. The aim of the work was to identify the best growth conditions for the production of coatings with a low work function suitable for the anode of hybrid thermionic-photovoltaic (TIPV) devices. The chemical composition and work function φ of the films with different thicknesses were investigated by X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS). The lowest value of φ = 2.1 eV was obtained for the film with a thickness of ~2 nm. In the valence band spectra of the films at low kinetic energy, near the cutoff, a characteristic peak of negative electron affinity was present. This effect contributed to a further reduction of the film's work function.     

Effects of Sucrose Palmitate on the Physico-Chemical and Mucoadhesive Properties of Buccal Films

In our current research, sucrose palmitate (SP) was applied as a possible permeation enhancer for buccal use. This route of administration is a novelty as there is no literature on the use of SP in buccal mucoadhesive films. Films containing SP were prepared at different temperatures, with different concentrations of SP and different lengths of hydroxypropyl methylcellulose (HPMC) chains. The mechanical, structural, and in vitro mucoadhesive properties of films containing SP were investigated. Tensile strength and mucoadhesive force were measured with a device and software developed in our Institute. Positron annihilation lifetime spectroscopy (PALS) and X-ray powder diffractometry (XRPD) were applied for the structure analysis of the films. Mucoadhesive work was calculated in two ways: from the measured contact angle and compared with direct mucoadhesive work, which measured mucoadhesive force, which is direct mucoadhesion work. These results correlate linearly with a correlation coefficient of 0.98. It is also novel because it is a new method for the determination of mucoadhesive work.