20#管线钢在役焊接HAZ的组织与性能研究

在役焊接过程中，管内流动介质的快速冷却，易使接头出现氢致裂纹。对20^#管线钢在不同冷却条件和不同焊接线能量下的HAZ的组织性能进行了模拟研究。结果表明，在流动水冷却下，HAZ出现较多的贝氏体、马氏体和MA组元等不平衡组织，使得HAZ的硬度高达330HvN5，性能最差。采用大的线能量焊接，形成较多的上贝氏体和粒状贝氏体组织，对改善接头性能有利。因此，在避免烧穿的前提下增大焊接线能量或减小管内介质的冷却能力，减少高硬度不平衡相的形成，可以降低HAZ氢致开裂敏感性。     

高校档案编研工作的现状与发展趋势

高校档案编研工作应着力于创新编研手段、确立创新理念、进行知识化编研,与时俱进,才能满足学校与社会各方面的工作需求。     

怎样成为一名优秀的高杆交信息工作者

在解释信息意识的概念的基础上,从几个方面阐述了信息工作的内涵和对信息工作者的要求,并提出了搞好高校信息工作的措施。     

30MnNbXt钢组合匹配接头性能的研究

本文为新钢种30MnNbXt设计了一种独特的组合匹配接头,研究了底层奥氏体焊条的合金系统及填充层结构钢焊条的强度对抗裂性的影响,探讨了底层高组配、填充层低组配的组合匹配焊缝特征区的组织特点及接头的力学性能。在西德WS1.7—2.0/3.5型综采支架立柱中应用表明,组合匹配接头可使30MnNbXt钢在室温下焊接时不产生裂纹;接头在焊后状态的使用性能完全符合产品技术条件要求。     

浅论新时期高校学生思想政治工作

新的形势既为高校学生思想政治工作提供了难得的历史机遇,也提出了更高的要求和严峻的挑战.高校学生思想政治工作要与时俱进、开拓创新,找准新的切入点.     

显像管调制特性的测量与分析

测试了显象管调制特性曲线，并分析了特性曲线与显像管工作原理．     

Sulfur adsorption on Fe(1 1 0): a DFT study

The adsorption of atomic S on the Fe(1 1 0) surface is examined using density functional theory (DFT). Three different adsorption sites are considered, including the atop, hollow and bridge sites and the S is adsorbed at a quarter monolayer coverage in a p(2 × 2) arrangement. The hollow site is found to be the most stable, followed by the bridge and atop sites. At all three sites, S adsorption results in relatively minor surface reconstruction, with the most significant being that for the hollow site, with lateral displacements of 0.09 Å. Comparisons between S-adsorbed and pure Fe surfaces revealed reductions in the magnetic moments of surface-layer Fe atoms in the vicinity of the S. At the hollow site, the presence of S causes an increase in the surface Fe d-orbital density of states between 4 and 5 eV. However, S adsorption has no significant effect on the structure and magnetic properties of the lower substrate layers.     

Succinic acid adsorption from fermentation broth and regeneration

More than 25 sorbents were tested for uptake of succinic acid from aqueous solutions. The best resins were then tested for successive loading and regeneration using hotwater. The key desired properties for an ideal sorbent are high capacity, complete stable regenerability, and specificity for the product. The best resins have a stable capacity of about 0.06 g of succinic acid/g of resin at moderate concentrations (1–5 g/L) of succinic acid. Several sorbents were tested more exhaustively for uptake of succinic acid and for successive loading and regeneration using hot water. One resin, XUS 40285, has a good stable isotherm capacity, prefers succinate over glucose, and has good capacities at both acidic and neutral pH. Succinic acid was removed from simulated media containing salts, succinic acid, acetic acid, and sugar using a packed column of sorbent resin, XUS 40285. The fermentation byproduct, acetate, was completely separated from succinate. A simple hot water regeneration successfully concentrated succinate from 10 g/L (inlet) to 40–110 g/L in the effluent. If successful, this would lower separation costs by reducing the need for chemicals for the initial purification step. Despie promising initial results of good capacity (0.06 g of succinic/g of sorbent), 70% recovery using hot water, and a recovered concentration of >100 g/L, this regeneration was not stable over 10 cycles in the column. Alternative regeneration schemes using acid and base were examined. Two (XUS 40285 and XFS-40422) showed both good stable capacities for succinic acid over 10 cycles and >95% recovery in a batch operation using a modified extraction procedure combining acid and hot water washes. These resins showed comparable results with actual broth.     

中碳钙硫易切削钢夹杂物形态控制

在实验室进行了1 kg坩埚实验,研究了中碳高硫结构钢钙处理前后夹杂物的形态、尺寸及组?结果表明:钢钙处理后获得了可以改善钢切削性的纺锤形夹杂物,夹杂物的平均纺锤形率为68.11%,并且随钢中[Ca]/[S]增加夹杂物纺锤形化趋势增加;钙处理后小于2.5 μm的夹杂物占夹杂物总量的76.05%,夹杂物细小、弥散分布于钢基体中;夹杂物类型以钙铝酸盐芯硫化物外壳的复合夹杂物、(Mn,Ca)S形式的硫化物为主,有少量的铝酸钙与CaS的复合夹杂物;含钙硫的45钢铸态钢锭比普通45钢铸态钢锭切削性能有所改善.     

Inhibiting effects of some oxadiazole derivatives on the corrosion of mild steel in perchloric acid solution

The efficiency of 3,5-bis(n-pyridyl)-1,3,4-oxadiazole (n-POX, n = 1, 2, 3), as corrosion inhibitors for mild steel in 1 M perchloric acid (HClO₄) have been determined by weight loss measurements and electrochemical studies. The results show that these inhibitors revealed a good corrosion inhibition even at very low concentrations. Comparison of results among those obtained by the studied oxadiazoles shows that 3-POX was the best inhibitor. Polarisation curves indicate that n-pyridyl substituted-1,3,4-oxadiazoles are mixed type inhibitors in 1 M HClO₄. The adsorption of these inhibitors follows a Langmuir isotherm model. The electronic properties of n-POX, obtained using the AM1 semi-empirical quantum chemical approach, were correlated with their experimental efficiencies using the linear resistance model (LR).