Structural transformation from shish‐kebab crystals to micro‐fibrils through hot stretching process of gel‐spun ultra‐high molecular weight polyethylene fibers with high concentration solution

Structural evolution of gel‐spun ultra‐high molecular weight polyethylene fibers with high concentration solution via hot stretching process was investigated by in situ small‐angle X‐ray scattering, in situ wide‐angle X‐ray diffraction measurements, scanning electron microscopy, and differential scanning calorimetry. With the increase of stretching strain, the long period continuously increases at relative lower stretching temperature, while it first increases and then decreases rapidly at relative higher stretching temperature. The kebab thickness almost keeps constant during the whole hot‐stretching process and the kebab diameter continually decreases for all stretching temperatures. Moreover, the length of shish decreases slightly and the shish quantity increases although there is almost no change in the diameter of shish crystals during the hot stretching process. The degree of crystal orientation at different temperatures is as high as above 0.9 during the whole stretching process. These results indicate that the shish‐kebab crystals in ultra‐high molecular weight polyethylene fibers can transform continuously into the micro‐fibril structure composed mostly of shish crystals through the hot stretching process. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 225–238     

生物质气化燃气中固体颗粒物的恒温临氧热解机理研究

在固定床反应器中考察了不同气氛下PBG恒温热解特性的差异,结合XPS与~(13)C NM R等技术手段分析了400℃恒温热解条件下PBG固相产物的化学结构变化。结果表明,PBG在400℃恒温热解时,生物质气化燃气(BAG)与N_2气氛下更易生成焦油,其析出量分别为50.71与37.45 mg/g,而临氧燃气气氛(BAG+2%O_2)下焦油析出量仅为11.96 mg/g,说明适量O_2的存在可有效抑制焦油的生成。进一步进行化学结构分析表明,在燃气(BAG)恒温热解条件下,PBG主要发生以脱氢脱氧为主的芳香化缩聚反应,易形成焦油类的大分子多环芳烃;而在临氧燃气(BAG+2%O_2)恒温热解条件下,PBG表面的有机基团易与O_2发生表面氧化反应,生成表面含氧官能团,在一定程度上抑制了芳香环缩聚反应,进而有利于降低焦油类物质的产率。因此,在生物质气化燃气实际高温过滤过程中适当添加氧(如:2%O_2),可有效降低PBG焦油收率,且不会形成大分子多环芳烃,有助于解决粗燃气过滤的过滤介质堵塞问题。     

Importance of the isopropylidene terminal of geranylgeranyl group for the formation of tetraether lipid in methanogenic archaea

Labeling experiments using several deuterated lipids were pursued to study the biosynthesis of macrocyclic isoprenoidal lipids of thermophilic methanogenic archaea, Methanothermobacter thermautotrophicus. The isopropylidene terminal of geranylgeranyl group of monomeric precursor appeared to be important for the CC bond formation at the hydrophobic end in the macrocyclic lipids. A mechanism involving a radical trigger at the allylic methyl group is proposed for this CC bond formation.     

On the optimal surfmer addition profile in emulsion polymerisation

In this work, the optimal surfmer feeding profile for stabilizing a high-solid-content acrylic latex with a non-ionic alkenyl functional ^TMMaxemul 5011 was calculated. For this purpose, the model developed by de la Cal and Asua (J. Polym. Sci., Part A: Polym. Chem. 39 (2001) 585) was used. It was observed that, in spite of the low reactivity of the surfmer, it was possible to increase substantially the surfmer conversion using an optimal surfmer addition policy. To cite this article: E. Aramendia et al., C. R. Chimie 6 (2003).     

Pressurized hot water extraction of berberine, baicalein and glycyrrhizin in medicinal plants

Pressurized hot water extraction (PHWE) using a laboratory made system was applied for the extraction of thermally labile and reasonably polar components such as berberine in coptidis rhizoma, glycyrrhizin in radix glycyrrhizae/liquorice and baicalein in scutellariae radix. PHWE was carried out dynamically at a flow of 1 ml/min, temperature between 95 and 140 °C, an applied pressure of 10-20 bar and extraction time of 40 min. Extraction by PHWE was found to give efficiencies comparable to Soxhlet extraction for baicalein in scutellariae radix and sonication for berberine in coptidis rhizoma, and glycyrrhizin in radix glycyrrhizae. Effects of ethanol added into the water used in PHWE were explored. Pressurized liquid extraction (PLE) with methanol as solvent was used for extraction of baicalein in scutellariae radix. The marker compounds present in the various medicinal plant extracts were determined by gradient elution HPLC.     

Pressurized hot water extraction (PHWE)

Pressurized hot water extraction (PHWE) has become a popular green extraction method for different classes of compounds present in numerous kinds of matrices such as environmental, food and botanical samples. PHWE is also used in sample preparation to extract organic contaminants from foodstuff for food safety analysis and soils/sediments for environmental monitoring purposes. The main parameters which influence its extraction efficiency are namely the temperature, extraction time, flow rates and addition of modifiers/additives. Among these different parameters studied, temperature is described as the most important one. It is reported that the extraction of certain compounds is rather dependent on pressurized water with different applied temperature. Thus, the stability and reduced solubilities of certain compounds at elevated temperatures are highlighted in this review. With some modifications, a scaled-up PHWE could extract a higher amount of desirable compounds from solid and powdered samples such as plant and food materials. The PHWE extracts from plants are rich in chemical compounds or metabolites which can be a potential lead for drug discovery or development of disease-resistant food crops.     

Uncertainty of the Thermal Conductivity Measurement Using the Transient Hot Wire Method

This work deals with uncertainty analysis of the thermal conductivity measurement using the transient hot wire method. The characterization is made from a sample of low-density, polyethylene BRALEN SA 200-22. The utilized experimental data are obtained from the test measurements performed on the air at room temperature. The sources of measurement errors are analyzed and the uncertainty of the measured value of the thermal conductivity is evaluated. The analysis shows that in the present case the uncertainty of the thermal conductivity measurement is about ±3.3% for 68% confidence level.This revised version was published online in November 2005 with corrections to the Cover Date.     

Succinic acid adsorption from fermentation broth and regeneration

More than 25 sorbents were tested for uptake of succinic acid from aqueous solutions. The best resins were then tested for successive loading and regeneration using hotwater. The key desired properties for an ideal sorbent are high capacity, complete stable regenerability, and specificity for the product. The best resins have a stable capacity of about 0.06 g of succinic acid/g of resin at moderate concentrations (1–5 g/L) of succinic acid. Several sorbents were tested more exhaustively for uptake of succinic acid and for successive loading and regeneration using hot water. One resin, XUS 40285, has a good stable isotherm capacity, prefers succinate over glucose, and has good capacities at both acidic and neutral pH. Succinic acid was removed from simulated media containing salts, succinic acid, acetic acid, and sugar using a packed column of sorbent resin, XUS 40285. The fermentation byproduct, acetate, was completely separated from succinate. A simple hot water regeneration successfully concentrated succinate from 10 g/L (inlet) to 40–110 g/L in the effluent. If successful, this would lower separation costs by reducing the need for chemicals for the initial purification step. Despie promising initial results of good capacity (0.06 g of succinic/g of sorbent), 70% recovery using hot water, and a recovered concentration of >100 g/L, this regeneration was not stable over 10 cycles in the column. Alternative regeneration schemes using acid and base were examined. Two (XUS 40285 and XFS-40422) showed both good stable capacities for succinic acid over 10 cycles and >95% recovery in a batch operation using a modified extraction procedure combining acid and hot water washes. These resins showed comparable results with actual broth.     

热分析法评价反应性热溶胶的初粘强度

热粘指数;热分析法评价反应性热溶胶的初粘强度