用高品位高硫铝土矿生产氧化铝时的除硫新方法研究

本文研究了贵州高硫型高品位铝土矿溶出性能,考查了石灰添加量、溶出温度、苛性碱浓度和溶出时间对氧化铝溶出率的影响以及铝土矿的硫向溶液中的转化率(即硫的溶出率)的影响;还研究了用铝酸钡净化拜耳赤泥洗液的除硫条件和效果。     

饲育条件下Semisulcospiens decipiens的生长

在饲育温度条件下研究了Ｓ．ｄｅｃｉｐｉｅｎｓ的生长和产仔数及与饲育水温的关系。结果表明水温在上升期和下降期，新生贝和稚贝的生长速度较快，产仔数也较多．成体贝在水温１１℃～２９℃时，都可产出新生贝，以１８℃～２４℃时产出较多．在高温饲育条件下，成体贝的生长速度缓慢。     

高温涂层自愈合性能的研究

探讨了用涂层的高温透气性的变化率评价涂层自愈合性的实验方法，研究了涂层高温自愈合能力的可能性，并用该方法研究了玻璃质涂层的高温自愈合性能．     

消费与储蓄的有关问题之探讨

应用控制理论与方法分析消费、储蓄、工资收入与利率之间的关系,建立相应的数学模型。利用此模型,可以确定合理的消费与储蓄的比例关系,为制定相应的宏观经济政策提供依据。     

缩合型硅橡胶与金属的粘接研究

在以南大α系列硅烷偶联剂为基础的交联增粘体系中,引入某些γ系列硅烷偶联剂及增粘助剂,制成单组分室温硫化型粘合剂,并测定了其与铝、铜及不锈钢的粘接性能关系.研究表明:在既定的体系中加入KH-550、KH-792、WD-30以及KH-550与KH570的反应物可有效提高粘合剂对铝合金、黄铜及不锈钢的内聚破坏率,而且KH-550、KH-792还有助于改善粘合剂的贮存稳定性.     

利率市场化条件下农村信用社的困难与应对

从分析利率市场化条件下农村信用社面临的问题人手，剖析问题存在的原因，提出：为保证我国农村信用社利率市场化的顺利进行，必须认真总结农村信用社利率试点的经验和教训，在信用社产权改制、金融产品定价、建立利率风险管理机制等方面作一些探索。     

具有非常数回报率的证券指数跟踪问题的简单脉冲控制

运用随机脉冲控制理论讨论了均值 -方差模式的现金管理指数跟踪问题 ,在回报率随现金比重变化的情况下 ,讨论了证券指数跟踪最优化问题 ,得出了存在简单脉冲控制策略的充分性条件 .     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

Synthesis of poly(p‐phenylene sulfide) from bis(4‐bromophenyl) disulfide

Improved reaction conditions for the preparation of poly(p‐phenylene sulfide) (PPS) directly from bis(4‐bromophenyl) disulfide (BBD) have been established. Heating BBD with magnesium metal afforded only a low molecular weight polymer. PPS with a melting temperature around 280 °C was obtained from BBD in the presence of sodium carbonate or zinc metal. The best results were obtained with the addition of a catalytic amount of KI to the zinc–BBD mixture. Polymers prepared by the above methods are semicrystalline and dissolve in 1‐chloronaphthalene and have properties comparable to commercial PPS. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 900–904, 2006     

Lithographic design of photosensitive polyarylates based on reaction development patterning

The factors affecting pattern‐forming properties in reaction development patterning were examined with polyarylates with various bisphenol moieties. The developability of the photosensitive polyarylates was dependent on the properties of the subtituent (R) in the bisphenol moieties. The development time decreased in the following order: R?C(CH₃)₂ > fluorenyl unit ? phenolphthalein unit > C(CF₃)₂ > SO₂. This order agreed with that of the reactivity between the polyarylates and ethanolamine, and these orders can be explained by pK_a of the bisphenol used to prepare the polyarylates. The development with NH₂? R′? OH resulted in successful positive‐tone pattern formation. However, pattern formation with the developers containing NH₂? R′? OCH₃ was unsuccessful. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2694–2706, 2006