A Mössbauer spectroscopic study of an industrial catalyst for dehydrogenation of etylbenzene to styrene

Iron oxide catalyst with spinel structure used for dehydrogenation of ethylbenzene is one kind of important catalyst in petrochemical industry. In this work several series of industrial catalyst were prepared with different components and different manufacturing processes. Mössbauer Spectroscopy has been used to determine the optimal components and the better manufacturing process for spinel structure formation. The results may prove useful for producing the industrial dehydrogenation catalyst with better catalytic property.     

Nanocrystalline ceramic films for efficient conversion of light into electricity

Transparent nanocrystalline films of oxide semiconductors such as TiO₂ and Fe₂O₃ have been prepared on a conducting glass support employing a sol-gel procedure. The films are composed of nanometer-sized particles sintered together to allow for percolative charge carrier transport. The internal surface of these films is very high, roughness factors of the order of 1000 being readily obtained. Electric polarization was applied for forward and reverse biasing of the films and the resulting optical changes have been analyzed to derive their flat band potential. Band gap excitation of such nanocrystalline semiconductors produces electron-hole pairs which migrate through the film to be collected as electric current. Steady state photolysis and time resolved laser techniques have been applied to scrutinize the mechanism of light induced charge separation within the nanostructure. When derivatized with a suitable chromophore, TiO₂ films give extraordinary efficiencies for the conversion of incident photons into electric current, exceeding 90% for certain transition metal complexes within the wavelength range of their absorption band. The underlying physical principles of these astonishing findings will be discussed. Exploiting this discovery, we have developed a new type of photovoltaic device whose overall light to electric energy conversion yield is 10% under simulated AM 1.5 solar radiation.     

芦岭矿采空区煤炭自燃发火与开采技术关系的试验研究

采用了包括多点热电偶测定采空区遗煤温度、应用六氟化硫气体示踪和测定漏风压差等综合技术手段研究分析了漏风分布规律。结果发现,遗煤温度变化受漏风温度和漏风强度影响较大;停采线漏风的量及漏风时间受主要进、回风道的布置以及采掘接替安排的影响。由于采用无煤柱开采技术,三个相邻阶段的采空区之间连通,存在漏风,最后又从开采技术上提出了防火措施。     

多环节冲击测量系统方波响应时间的计算

实际的冲击高电压测量系统，通常由多个不同特性的环节组成．作者以最简洁的数学推导式，表达了多环节测量系统方波响应时间的计算方法。借助于这一计算方法．讨论了方波源波形非理想时，它对实际方波响应时间测量值的影响。所提出的反映原始方波质量的技术指标，可比“上升时间”更易确定，而且实用性强．     

HIGH ACCURACY FINITE VOLUME ELEMENT METHOD FOR TWO-POINT BOUNDARY VALUE PROBLEM OF SECOND ORDER ORDINARY DIFFERENTIAL EQUATIONS

1　ＩｎｔｒｏｄｕｃｔｉｏｎＦｉｎｉｔｅｖｏｌｕｍｅｅｌｅｍｅｎｔｍｅｔｈｏｄｏｒＦＶＥＭｕｓｅｓａｖｏｌｕｍｅｉｎｔｅｇｒａｌｆｏｒｍｕｌａｔｉｏｎｏｆｔｈｅｄｉｆ ｆｅｒｅｎｔｉａｌｅｑｕａｔｉｏｎｗｉｔｈａｆｉｎｉｔｅｐａｒｔｉｔｉｏｎｉｎｇｓｅｔｏｆｖｏｌｕｍｅｔｏｄｉｓｃｒｅｔｉｚｅｔｈｅｅｑｕａｔｉｏｎ ,ｔｈｅｎｒｅ ｓｔｒｉｃｔｓｔｈｅａｄｍｉｓｓｉｂｌｅｆｕｎｃｔｉｏｎｓｔｏａｌｉｎｅａｒｆｉｎｉｔｅｅｌｅｍｅｎｔｓｐａｃｅｔｏｄｉｓｃｒｅｔｉｚｅｔｈｅｓｏｌｕｔｉｏｎ ([1 -4 ] ) .…     

磁化合成铁氧体催化机理的探讨

本文用磁化合成法制取了一种新型高效铁氧体催化剂,用高分辨分析电镜,测定了其晶体结构、化学组成和原子级的显微形貌;提出了一种催化机制的新见解和一个研制催化剂的新方法.     

126Cs的高自旋态能级结构

利用融合蒸发反应¹¹⁶Cd(¹⁴N,4n)¹²⁶Cs布居了¹²⁶Cs的高自旋态.观测到了100多条新的γ跃迁和相应的能级,建立了双奇核¹²⁶Cs由9个转动带构成的能级纲图.尝试性地指定了大部分能级的自旋和宇称以及各转动带的Nilsson单粒子组态.极大地丰富了已有的实验结果.     

坚持以人为本,推进高职应用文课程改革

应用文在高职院校普遍开设，是培养实用型人才不可缺少的课程。在“以人为本”思想指导下，高职应用文课程改革不能只考虑课程本身特点，课程改革应充分考虑专业教学和学生实际，在教学观念、教学内容、教学手段、教学评价等方面要真正做到“以人为本”，真正体现高职应用文课程的价值，     

散热器型芯烘烤窑净化系统中分离器的设计研究

为解决铸铁散热器生产环境污染、产品成品率及产品质量低下等问题,笔者研制了XWJ-1型消烟雾化净化系统。该系统是根据乡镇企业实际状况,在原烘烤窑内采用烟道重新配置、油烟预处理、水雾化冷却、分离污染物、净化排放五步骤设计。通过6年多的试验运行和改进,结果证明,使用XWJ-1型油烟雾化净化系统,可以把高温、高浓度烟气中的焦油和有害气体减少90%,并分离净化到符合国家环保排放标准要求(GB9078-1996,GB16297-1996),较好地解决了热能利用、污染物回收利用等问题,提高了制芯及散热器的成品率及其质量,使企业经济效益显著提高。     

含碳铬矿团块高温还原特性研究

在1250～1450℃高温范围内研究内配碳铬矿团块中Cr2O3还原率和总还原率与内配碳比和渣相碱度的关系,并分析了含碳铬矿团块还原过程中金属相和渣相聚集和分离状态的变化。结果表明,Cr2O3还原率主要受还原温度和内配碳比的影响,当还原温度高于1400℃时,控制适宜的渣相组成和内配碳比,可以实现还原产物中金属相和渣相的完全分离。利用实验得到的条件,可望开发一种新的廉价碳素铬铁的生产方法。