高效有机吸附膜吸附数学模型的建立

本文建立了高效有机吸附膜吸附数学模型，并与实验数据进行了比较，发现模型的数值计算结果与实验值基本相符，本模型具有较高的实用价值。     

化学教学中文献探究教学模式初探

文章对文献探究教学模式的概念、特点、功能、评价以及适用范围进行了介绍;设计出文献探究教学模式在中学化学教学中的使用程序,并且指出了运用文献探究模式教学时需要注意的事项.     

高师教学模式适应新课标体系的探讨

新课程标准要求构建高师特色的新型教学模式,使学生在较短的学习期间内完成专业知识学习,提高各方面的素质能力,以培养出合格的人才.     

Glauber和Kawasaki动力学下正方格子上伊辛模型居里温度的蒙特卡罗计算

利用蒙特卡罗方法研究正方格子上的伊辛模型的相变问题．讨论了不同翻转方式(随机翻转和顺序翻转)以及不同动力学规则(Glauber动力学和Kawasaki动力学)对正方格子上的伊辛模型的居里温度Tc的影响．结果表明，当Glauber动力学占主要地位时，在两种翻转方式下都可以计算出居里温度Tc的值，当Kawasaki动力学占主要地位时，只能用随机翻转的方法获得居里温度Tc．     

从民问借贷的保护机制看惯例的经济价值

运用博弈论理论分析了民间借贷的保护机制——惯例形成的根据。进一步研究了惯例的经济价值——节省社会交易成本，并实现了非正式制度的资源配置功能。     

Gas transport through homogeneous and asymmetric polyethersulfone membranes

Both homogeneous and asymmetric polyethersulfone (PES) membranes were prepared by solvent casting. The sorption and permeation behavior of CO₂, O₂, and N₂ using these two kinds of cast PES membranes and commercially available homogeneous PES film was investigated to extract the pressure dependence of gas permeability and the permselectivity for CO₂ relative to N₂, and to confirm the validity of the working assumption that a skin layer in an asymmetric membrane can be essentially replaced by a thick homogeneous dense membrane. The pressure dependence of the mean permeability coefficient to CO₂ in homogeneous membranes obeys the dual-mode mobility model. The ideal separation factor for CO₂ relative to N₂ at an upstream pressure of 0.5 MPa attains ca. 40, while the permeability to CO₂ is about 2.7 Barrer at the same upstream pressure. The same separation factor in asymmetric membranes amounts to 35. The diffusion behavior for the skin layer in an asymmetric membrane with a thin skin layer can be simulated approximately by that in a homogeneous dense membrane. © 1993 John Wiley & Sons, Inc.     

Slow crack growth in blends of HDPE and model copolymers

The resistance to slow crack growth (SCG) was measured in binary blends of high density polyethylene (HDPE) and 5–10% concentrations of model ethylene-butene random copolymers by measuring the time to failure (t_f) under a constant stress intensity. An increase of t_f with the addition of the copolymer if the copolymer could crystallize and the increase was greater the higher branch density. The copolymer with 117 branches/1000C could not crystallize and therefore its blend had a t_f that was less than that of the HDPE. The fracture energies of the blends as determined by their resistance to SCG were compared with the energy by rapid fracture, J_c, as previously measured by Rhee and Crist. It is concluded that SCG is more sensitive to variations in the microstructure than is rapid fracture and that the differences in SCG behavior can be qualitatively explained in terms of the differences in microstructure of the blends. ©1995 John Wiley & Sons, Inc.     

微型硅谐振式力传感器的振动分析

介绍了谐振式力传感器的工作原理，并从理论上和实验上对中科院合肥智能所研制的第一代微型硅谐振梁（３×０．４×０．０４５ｍｍ＾３）式测力传感器进行了全面的振动分析，所得结构为其进一步优化设计提供了科学根据，文中使用的实验分析方法，为其它微小物体的动态和识别提供了一条有效途径。     

切削刀具倒棱刃口挤压力的理论计算

根据试验观察．揭出了刀具刃口带负倒棱时的切削模型。在此模型中,刀具刃口 存在一个“金属死区”。以新模型为基础．采用能量法,对高温、高应变率下刀具刃 口的挤压力进行了理论计算。所做工作的特点是：１）在材料变形分析中计入了挤压 层金属绕过刀具刃口时的过剩变形;２）进行有关材料变形与物理特性的计算时,考 虑了温度与应变率的影响。利用新研制的压电式切削测力仪进行验证试验,其结果表 明,理论计算值与实测数据较好一致。     

产物分离固相化细胞反应器的设计和数学模型

设计了一种以挥发性产物和非挥发性底物为特征的四相反应器——分离器。在此反应器中,生物催化剂被固定在固体柱填充物上并与含有底物的液相接触,汽相流过柱子而将挥发性产物蒸发迸入汽相。反应器由同方向流的浓缩器和反方向流的分离器两个基本汽——液流部分组成。并建立了吸附的单层细胞稳态群体数学模型和反应器平衡状态模型。