Molecular beams and model catalysis: activity and selectivity of specific reaction centers on supported nanoparticles.

Reaction kinetics on nanometer-scale particles are different from those on extended surfaces of bulk materials. This fact has been utilized for a long time to empirically maximize the performance of heterogeneous catalysts, but the understanding of the underlying effects is poor at the microscopic level. Modern molecular beam-based methods, however, allow us to derive very detailed kinetic information on catalytically active surfaces. In combination with structurally highly controlled model catalysts, microscopic insights into the activity and selectivity of specific reaction centers on catalyst nanoparticles can be obtained. This combined approach is illustrated through simple model reactions.     

真空下X2 (X=Cl、Br)与AgOCN气-固反应机理

在真空条件下完成了X2 (X=Cl、Br)与AgOCN间的气-固异相反应，利用紫外光电子能谱（PES）仪，探测与确定反应产物是XNCO (X=Cl、Br)，并推断其可能为一过渡态反应，生成中间络合物，新键产生与旧键断裂同时进行.     

On the stereochemistry of the Horner—Emmons reaction between 3-functionally substituted 2-methyl-2-propenylphosphonates and aliphatic aldehydes

The reaction of diethyl 3-ethoxycarbonyl-2-methyl-2-propenylphosphonate (1a) with 3-methylbutanal (2) in heterogeneous MOH (solid)-benzene systems in the presence of 5–10 mol.% of benzyltriethylammonium chloride (BTEAC) gives the reaction product (3) with a higher, for M=K, or lower, for M=Li, ratio of 2E,4E and 2Z,4E-stereoisomers than that observed in the absence of BTEAC. Tetrabutylammonium bromide (TBAB) as a catalyst of the reaction1a + 2 3 in the system KOH (solid)-wet benzene leads to a higher [2E,4E-3][2Z,4E-3] ratio than BTEAC; this ratio grows from 4456 without TBAB to 8020 at 100 mol.% of TBAB. In the latter case the stereochemical outcome of the reaction is similar to that obtained when tetrabutylammonium hydroxide in dry benzene is used as the deprotonating agent. The corresponding diisopropyl phosphonate (1b) and 3,7-dimethyloctanal (4a) interact in the system KOH (solid)-wet benzene-TBAB to give hydroprene (5) containing 88 % of the 2E,4E-isomer (5a) while in the case of 1 equiv. of [(n-Bu₄)N]OH in dry benzene the content of5a is 92 %. Diisopropyl 3-isopropoxycarbonyl-2-methyl-2-propenylphosphonate (1c) and 7-methoxy-3,7-dimethyloctanal (4b) under either of these conditions afford methoprene (6) containing 93 % of the 2E,4E-isomer.Part 6, see ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1094–1098, June, 1993.     

The use of Nafion-H® as an efficient catalyst for the direct conversion of primary and secondary trimethylsilyl ethers to their corresponding ethers under mild and heterogeneous conditions

Primary and secondary trimethylsilyl ethers were converted to their corresponding ethers in the presence Nafion-H® with good to excellent yields under mild and heterogeneous conditions.     

Novel metathesis catalysts based on ruthenium 1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidenes: synthesis, structure, immobilization, and catalytic activity

The synthesis of novel ruthenium-based metathesis catalysts containing the saturated 1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene ligand, that is, [RuCl2(NHC)[=CH-2-(2-PrO)-5-NO(2)-C6H3]] (1) and [Ru(CF3COO)2(NHC)[=CH-2-(2-PrO)-5-NO2-C6H3]] (2) (NHC=1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene) is described. Both catalysts are highly active in ring-closing metathesis (RCM) and ring-opening cross-metathesis (ROCM). Compound 1 shows moderate activity in enyne metathesis. Compound 2 is not applicable to enyne metathesis since it shows high activity in the cyclopolymerization of diethyl dipropargylmalonate (DEDPM). Poly(DEDPM) prepared by the action of 2 consists of 95% five-membered rings, that is, poly(cyclopent-1-enevinylene)s, and 5 % of six-membered rings, that is, poly(cyclohex-1-ene-3-methylidene)s. The polymerization proceeds in a nonliving manner and results in polyenes with broad polydispersities (1.9< or =PDI< or =2.3). Supported analogues of 2 were prepared by immobilization on hydroxymethyl-Merrifield resin and a monolithic support derived from ring-opening-metathesis polymerization (ROMP). Catalyst loadings of 1 and 2.5%, respectively, were obtained. Both supported versions of 2 showed excellent reactivity. With 0.24-2% of the supported catalysts, yields in RCM and ROCM were in the range of 76-100%. Leaching of ruthenium was low and resulted in Ru contaminations of the products of less than 0.000014% (0.14 ppm).     

Synthesis of phthalide derivatives using nickel-catalyzed cyclization of o-haloesters with aldehydes

The reaction of o-bromobenzoate (1 b) with benzaldehyde (2 a) in the presence of [NiBr(2)(dppe)] (dppe=1,2-bis(diphenylphosphino)ethane) and zinc powder in THF (24 hours, reflux temperature), afforded 3-phenyl-3H-isobenzofuran-1-one (3 a) in an 86 % yield. Similarly, o-iodobenzoate reacts with 2 a to give 3 a, but in a lower yield (50 %). A series of substituted aromatic and aliphatic aldehydes (2 b, 4-MeC(6)H(4)CHO; 2 c, 4-MeOC(6)H(4)CHO; 2 d, 3-MeOC(6)H(4)CHO; 2 e, 2-MeOC(6)H(4)CHO; 2 f, 4-CNC(6)H(4)CHO; 2 g, 4-(Me)(3)CC(6)H(4)CHO; 2 h, 4-C(6)H(5)C(6)H(4)CHO; 2 i, 4-ClC(6)H(4)CHO; 2 j, 4-CF(3)C(6)H(4)CHO; 2 k, CH(3)(CH(2))(5)CHO; 2 l, CH(3)(CH(2))(2)CHO) also underwent cyclization with o-bromobenzoate (1 b) producing the corresponding phthalide derivatives in moderate to excellent yields and with high chemoselectivity. Like 1 b, methyl 2-bromo-4,5-dimethoxybenzoate (1 c) reacts with tolualdehyde (2 b) to give the corresponding substituted phthalide 3 m in a 71 % yield. The methodology can be further applied to the synthesis of six-membered lactones. The reaction of methyl 2-(2-bromophenyl)acetate (1 d) with benzaldehyde under similar reaction conditions afforded six-membered lactone 3 o in a 68 % yield. A possible catalytic mechanism for this cyclization is also proposed.     

Dicyano-Functionalized MCM-41-Supported Palladium Complex as An Efficient Catalyst for Allylation of Aldehydes and Ketones

Dicyano-functionalized MCM-41-supported palladium complex was prepared from dicyano-functionalized MCM-41 and palladium chloride. This complex exhibited high catalytic activity in the allylation of aldehydes and ketones with allylic chlorides in the presence of SnCl2. This polymeric palladium complex can be recovered and reused without noticeable loss of activity.     

纳米级金膜微电极的制作,表征及异相催化反应

报道了纳米级金膜微电极的制作方法，用ＸＰＳ及ＳＥＭ对电极表面进行了表征，考察了该电极的循环伏安及计时电流特性，在聚吡咯修饰微带金电极上成功地实现了葡萄糖氧化酶和电子传递媒体Ｆｅ（ＣＮ）６＾３－的同时固定，并研究了ＧＯＤ／Ｆｅ（ＣＮ）６＾３－／ＰＰｙ微酶电极对葡萄糖的响应，稳态响应电流与葡萄糖浓度之间存在Ｍｉｃｈｅａｌｉｓ－Ｍｅｎｔｅｎ动力学特征。     

Simplistic modeling approach to heterogeneous dilute-acid hydrolysis of cellulose microcrystallites

The classic kinetic model for cellulose hydrolysis is often referred to as pseudo-homogeneous, a term revealing the insight that the process is actually heterogeneous. During the past 10–15 yr, the shortcomings of this model have been demonstrated in various studies and the interest in the heterogeneous aspects has increased. The present work presents a simplistic model in which the intrinsic, heterogeneous hydrolysis and transport rates are coupled by the assumption of a constant glucosidic surface concentration. The mechanisms affecting these two rates are largely unknown, but the model serves as a guideline for further exploration of the process.     

PAMAM Dendrimers as Anchors for the Preparation of Electrocatalytically Active Ultrathin Metallic Films

This paper describes the formation of catalytically active thin films of Pt, Pt/Au, and Pt/Ru on gold substrates stabilized by amine‐terminated polyamidoamine (PAMAM) dendrimers. A monolayer of dendrimer is initially self‐assembled on the gold substrate, which serves as a template for the growth of catalytically active thin films. As dendrimers contain tens to hundreds of functional groups at the periphery, the aggregate strength of the multidentate interactions with the gold substrate leads to the formation of robust films. The films were found to exhibit high catalytic activity for the oxidation of small hydrocarbons such as methanol. Such films offer versatility and scope for the design of effective electrocatalysts, especially in the context of microfuel cells and “dendrichips”; hence, they could find applications in the fields of sensors, fuel cells, and waste‐water treatment.