氧弹分解-原子荧光法测定煤中汞的研究进展

介绍氧弹分解-原子荧光法测定煤中汞含量的研究进展。影响该方法主要因素为称样量、氧气浓度、吸收剂、还原剂、煤种以及灰分含量。分别综述了各个因素对该方法的影响,可为相关标准的制定提供参考。该方法能够简单、经济、快速地测定煤中汞的含量,但是目前学者们对于该方法的相关研究还存在分歧,需要进一步的研究验证;同时,还需要注意以下几个研究方向:吸收剂和还原剂的选择对汞回收率的影响;吸收剂在密闭氧弹中对汞的回收率及吸收时间的研究;氧弹废气中汞含量的测定;煤种和灰分含量对汞含量测定的影响。     

The utility of Bacillus subtilis as a bioflocculant for fine coal

The application of Bacillus subtilis as a flocculant for fine coal has been reported here. Zeta-potential measurements showed that both the coal and bacteria had similar surface charge as a function of pH. Surface free energy calculations showed that the coal was hydrophobic while the bacterium was hydrophilic. The adhesion of the bacteria to coal and subsequent settling was studied in detail. Adhesion of bacteria to coal surface and subsequent settling of coal was found to be quick. Both adhesion and settling were found to be independent of pH, which makes the process very attractive for field applications. The presence of an electrolyte along with the bacterium was found to not only enhance adhesion of bacteria, but also produce a clear supernatant. Further, the settled fraction was more compact than with bacteria alone. Interaction energy calculations using the extended DLVO theory showed that the electrical forces along with the acid–base interaction energy play a dominant role in the lower pH range. Above pH 7, the acid–base interaction energy is the predominant attractive force and is sufficient enough to overcome the repulsive forces due to electrical charges to bring about adhesion and thus settling of fine coal. With increase in electrolyte concentration, the change in total interaction energy with pH is minimal which probably leads to better adhesion and hence settling.     

Groups of paramagnetic centres in coal samples with different carbon contents

Complex systems of paramagnetic centres existing in demineralised flame coal (71.4 wt% C), medium-rank coal (85.6 wt% C) and anthracite (94.9 wt% C) were analysed by electron paramagnetic resonance spectroscopy (EPR). Different groups of paramagnetic centres were searched in macerals (exinite, vitrinite, inertinite) of coals with carbon contents of 73.8 wt% C and 85.6 wt% C. Experimental EPR spectra were fitted by different superposition of theoretical lines. Total concentration of paramagnetic centres both in coal and macerals increases with carbon content in the sample. Total concentration of paramagnetic centres in macerals increases from exinite to inertinite. Four groups of paramagnetic centres were found in medium-rank coal, and only two groups exist in flame coal and anthracite. The EPR spectrum of medium-rank coal is a superposition of two broad and two narrow lines. Both broad and narrow, and two narrow lines were measured in EPR spectra of flame coal and anthracite, respectively. Two types of paramagnetic centres with broad lines and one group with narrow lines exist in exinite and vitrinite from medium-rank coal. Two narrow components were observed in EPR spectra of its inertinite. Two different broad electron paramagnetic resonance signals were detected for macerals from low-coalificated coal. Paramagnetic centres systems of medium-rank coal samples reveal the most complex character. Broad EPR lines were not observed for the higher coalificated samples, i.e., anthracite and inertinite from medium-rank coal. Narrow lines do not occur in EPR spectra of low-coalificated macerals. Strong dipolar interactions and fast spin-lattice relaxation processes are characteristic for paramagnetic centres with broad lines. Strong exchange interactions and short spin-lattice relaxation time were measured for paramagnetic centres with the narrowest EPR signals.     

煤油共处理油品的族组成研究

采用高效液相色谱法对兖州烟煤与催化裂化油浆共处理制备的油品的族组成进行了研究。结果表明 ,在实验条件下油品主要由烷烃和芳烃组成 ,杂原子化合物含量一般仅为 0 5 %～ 2 0 %。原料煤与油浆比例、反应温度、催化剂对油品族组成具有重要影响 ;随初始氢压不同 ,对油品族组成的影响不同 ;在 4MPa初始压力条件下 ,反应气氛 (氢气、氮气 )对煤油共处理和纯油浆制备油品的族组成影响不大。     

Thermogravimetric analysis of the co-combustion of the blends with high ash coal and waste tyres

Incineration methods are becoming increasingly important from the view point of the need to minimize the environmental impact of waste tyre disposal. Combustion of waste tyre, one high ash coal and tyre-coal blends with 10, 30 and 50% waste tyre were investigated by means of thermogravimetric analysis (TGA) carried out at 20 K min⁻¹ in the temperature range from ambient temperature to 1273 K. And effects of the mixed proportion between coal and waste tyre on the combustion process, ignition and burnout characteristics were also studied. The results indicate that the combustion of waste tyre is controlled by the emission of volatile matter, the regions are more complex for waste tyre (three or more peaks) than for coal (one peak). Also as compared with the case of burning only high ash coal, the incorporation of waste tyre can improve the combustion characteristics of high ash coal, especially the ignition performance and the peak weight loss compared with the separate burning of waste tyre and coal. Moreover, comparisons of the TG-DTG profiles between experimental and calculational results, it is indicate that there is a comparatively important difference, the co-combustion characteristics is the coupling effect between waste tyre and coal. The data resulting also showed that the co-combustion of waste tyre and low quanlitied coal as fuel is feasible.     

Optimization of the Conditions for the Cr (III) Adsorption on Activated Carbon

In order to understand the patterns of the adsorption equilibrium of Cr (III) on activated carbon, the adsorption process was studied by two different ways: classical batch experiments on commercial Norit and Merck activated carbons and their oxidized forms in a wide range of pHs; and extended time-based tests at the same pH values on the same adsorbents. This approach allowed us to understand the role of texture, chemical carbon surface functionality and experimental conditions (initial pH of the solution, contact time and adsorbate/adsorbent ratio) on the effectiveness of Cr (III) removal. The adsorption process of Cr (III) at (24 ± 1^∘C) on Merck and Norit activated carbons and their oxidized forms were studied at pH values between 1.5 and 5 (either adjusted or buffered). Chromium concentration was fixed at 200 ppm. The carbon loading ranged from 1.2 to 20 g/l. The carbon/Cr (III) solution contact time was varied from 0.5–1 month to 5 months, to ensure that the saturation of the carbon level was reached. According to the data obtained, the presence of carboxylic groups on carbon surface seems to enhance Cr (III) uptake at initial pH of the solution in the range between 2 and 4. Depending on the nature of the adsorbent surface chemistry, the contact time to reach equilibrium may range from 3 to 5 months. There is an optimum carbon loading which limits the Cr (III) uptake/removal at given pH value. In order to understand the adsorption process, an ion exchange, surface complex and surface precipitation were considered. This paper was presented in the 5th Brazilian Meeting on Adsorption, held at Natal, Brazil, 18-21 July, 2004.     

CFB煤燃烧/热解双反应器中热解室对立管内气固流动特性的影响

考察了循环流化床煤燃烧/热解双反应器系统中热解室的存在对立管内的压力分布及气固流动状况的影响。提升管的内径100 mm、高6 m，立管的内径44 mm、高3 m，热解室的截面积200 mm×200 mm、高770 mm。结果表明，随着提升管内表观气速Ur的增加，有无热解室立管内均为负压差流动，负压差梯度随着Ur的增加而减小。有热解室时，热解室内要保持一定的料位高度，整个立管内固体颗粒的流动为负压差移动床流动；没有热解室时，立管内为稀相流动和移动床流动同时存在，立管内平衡料柱高度随Ur的增加而升高。随着循环量Gs的增加，两种类型的立管内负压差梯度均随之增大，也存在着流动形态的差别。循环量Gs的增加会引起立管内平衡料柱高度的降低。立管内气固相对滑移速度也随着循环量Gs的增加而增大。     

Pyrolysis and TG Analysis of Shivee Ovoo Coal from Mongolia

The coal sample of the Shivee Ovoo deposits has been non-isothermally pyrolysed in a thermogravimetric analyser to determine the influence of temperature, heating rate and purge gas employed on the thermal degradation of the sample. The heating rates investigated in the TG were 10–50 K min^–1 to final temperature of 1000°C. N₂or CO₂ were employed as well as type of purge gas on the process of thermal degradation of the coal sample. The coal was also investigated in a fixed bed reactor to determine the influence of temperature and heating rate of the pyrolysis on the yield of products and composition of the gases evolved. The main gases produced were H₂, CH₄, C₂H₂, C₂H₄, C₂H₆, C₃H₆ and C₃H₈ and also minor concentrations of other gases. This revised version was published online in August 2006 with corrections to the Cover Date.     

Protection of immobilized sulfhydryl groups against autooxidation by alterations in their microenvironment

Immobilized sulfhydryl groups were prepared by partial thiolation of NH₂-glass beads. The microenvironment of the immobilized SH groups was varied by different chemical modifications of neighboring NH₂ groups. Introduction of a strong charge in the surroundings of immobilized sulfhydryls results in their dramatic stabilization against autooxidation. This effect is due to the salting of O₂ from the surface microlayer of the thiolated beads.     

煤微孔表面的分形维数及其变化规律的研究

本文利用气体吸附数据确定了各种煤阶煤（从褐煤到无烟煤）和煤焦气化反应过程中微孔表面的分形维数及其变化规律。这有助于进一步认识煤的孔结构特征。