Volumes,heat capacities and solubilities of amyl compounds in decyltrimethylammonium bromide aqueous solutions

Apparent molar heat capacities and volumes of amylamine (PentNH₂) 0.02m, capronitrile (PentCN) 0.02m and nitropentane (PentNO₂) 0.009m in decyltrimethylammonium bromide (DeTAB) micellar solutions, in water and in octane were measured at 25°C. By assuming that their concentration approaches the standard infinite dilution state, heat capacities and volumes were rationalized by means of previously reported equations following which the distribution constant between the aqueous and the micellar phase and heat capacity and volume of the additives in both phases are simultaneously derived. The present results are compared to those we have previously obtained for pentanol (PentOH). The thermodynamic properties of PentNH₂ in water and in micellar phase are substantially identical to those of PentOH but different from those of PentCN and PentNO₂ whereas the opposite behavior was observed in their pure liquid state and in octane. The nature of the solvent medium seems to affect the thermodynamic behavior of PentNH₂. Also, the study of the apparent molar heat capacities of the amyl compounds investigated here in micellar solutions as a function of surfactant concentration shows evidence of a maximum at about 0.4m DeTAB, which can be attributed to a micellar structural transition. Accordingly, the solubilities of PentCN and PentNO₂ as a function of the DeTAB concentration drop in the neighborhood of the concentration where heat capacities display the maximum.     

Novel Reactions of Organomolybdenum and Organotungsten Compounds: Additive–Reductive Carbonyl Dimerization,Spontaneous Transformation of Methyl Ligands into μ-Methylene Ligands,and Selective Carbonylmethylenation

Hitherto there was no reaction known that permits transformations of R¹R²-CO → 0.5 R¹R²R³C–CR¹R²R³ in one step. This type of additive–reductive carbonyl dimerization is now possible using alkoxy(alkyl)tungsten(v) complexes with aromatic, heteroaromatic or α,β-unsaturated aldehydes and ketones. When a corresponding phenyl complex was employed in a test experiment, it was revealed that an aliphatic ketone could be used as the substrate in this reaction. A second interesting type of reaction is the transformation of CH₃ ligands into μ-CH₂ ligands, which occurs during the treatment of MeLi or Me₃Al with molybdenum or tungsten chlorides (oxidation states VI and V, for Mo additionally IV) at low temperatures with liberation of CH₄. Here, the question arises as to whether the intermediate involved has a terminal CH₂ ligand (Schrock carbene complex) or a μ-CH₃ ligand (CH₃ bound by a two-electron three-center bond to two metal atoms). Of all the μ-CH₂ complexes obtained, those which were synthesized by the action of MeLi on molybdenum chlorides can be recommended as reagents for carbonylmethylenation of aldehydes and ketones. They display high selectivity, very low basicity, a surprising resistance to protons, they are readily available, can be easily modified and, as regards their selective behavior, they have been investigated more thoroughly than other readily accessible carbonylmethylenation reagents of comparable selectivity. The results of NMR spectroscopic investigations on the structure of the μ-CH₂ complexes, and associated reaction mechanisms are discussed. A survey of carbonylmethylenation reagents, which have been reported in the literature, permits comparisons to be made with carbonylmethylenating molybdenum and tungsten complexes.     

Volume and heat capacity of model non-aqueous self-assembly systems

Blends of immiscible polymers are often stabilized by block copolymers which can form non-aqueous micelles and microemulsions in the liquid polymers. The phase diagrans, apparent volumes and apparent heat capacities of model non-aqueous binary and ternary systems were studied in order to investigate the conditions under which such self-assembly systems could form. 1,2-Hexanediol, which can cosolubilize hexane and ethyleneglycol, forms inverse micelles in hexane and weak microaggregates in ethyleneglycol. Genapol X-060, a commercial alcoholic surfactant containing on the average an aliphatic chain of 13 carbons and 6 oxyethylenes (C₁₃E₆), forms microaggregates in poly(ethyleneglycol) 400. These self-assembly systems are strengthen in the presence of a third component which has an affinity for the inner phase.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

Pattern of separatrices and intrinsic reaction coordinates for degenerate thermal rearrangements

A structurally stable model of the standard adiabatic gradient field of the potential energy surface for certain pericyclic reactions is derived.These reactions are not subjected to the principles of orbital isomerism or to the Woodward-Hoffmann rules.Use is made of a principle established by Ariel Fernández and Oktay Sinanolu which precludes direct meta-IRC connections between transition states.It is shown that Jahn-Teller isomers of the singlet biradicals involved in the process are not interconvertible since the biradical configuration is not a transition state but a critical point with Hessian matrix with two negative eigenvalues.The topological features of the PES obtained by combinatorial methods are in full agreement with earlier results obtained from MINDO calculations.     

氧化偶联聚合方法合成电活性聚芳醚酮

通过氧化偶联聚合方法成功地合成出电活性聚芳醚酮. 该反应条件温和, 操作简单, 室温下即可进行. 用红外光谱、核磁共振谱、高效凝胶渗透色谱、循环伏安、热失重、X射线衍射等技术对所合成的聚合物进行了表征, 并探讨了聚合物的性能.     

Thermal properties of polypropylene post-consumer waste (PP PCW)

Differential scanning calorimetry has been used to study the heat flow during melting and crystallisation of a range of polypropylene post-consumer waste (PP PCW) grades and blends. The heat flow curves and the heat capacity curves indicated that the PP PCW grades and blends contained contaminants even after manual sorting and a cleaning process. The enthalpies of the PP PCW grades were lower than that for the virgin grades, as a result of degradation. Small amounts of polymeric contaminants (up to 10%) did not affect the enthalpies of PP PCW although other contaminants may have had some effect. The enthalpies of the PCW blends could in general be predicted by a linear additive rule, which is of importance for recycling a variety of PP PCW products.The authors would like to thank Dr. M. Killen (Basell Australia Pty. Ltd.), Mr. P. Slaven (Citiwide MRF), Dasma Valley Waste Prop. Ltd. and Mr. I. Janetzki (Huhtamaki Australia Ltd.) for supplying materials for this project. Financial support for the project was provided by Basell Australia and Ecorecycle Victoria, Australia.     

Electrooxidative coupling of salts of nitro compounds with halide,nitrite, cyanide,and phenylsulfinate anions

Electrolysis of salts of primary and secondary nitro compounds (nitroethane, 1- and 2-nitropropanes, nitrocyclohexane, and nitrocycloheptane) in the presence of excess halide, nitrite, cyanide, and phenylsulfinate anions under undivided and divided amperostatic electrolysis conditions in a two-phase medium (CH₂Cl₂/H₂O) produces geminal nitrohalides (35–85% yields), dinitro compounds (15–51%), nitronitriles (6–27%), and nitrosulfones (50–70%). The salts of secondary nitro compounds form the products of oxidative coupling with halide and phenylsulfinate anions under the undivided electrolysis conditions. In all other cases, divided electrolysis is required. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1539–1546, July, 2005.     

One-pot tethering of organic molecules through non-symmetric malonate derivatives

A new method for one-pot chemoselective heterobifunctional cross-linking of organic molecules is described. The method is based on tert-butyldiphenylsilyl malonate and involves two sequential carbodiimide couplings with two different molecules possessing a hydroxy or an amino functionality with one intermediate one-pot fluoride deprotection.     

Study on the reaction of triple helix poly(A:2I) with Cu~(2+)

The effect of Cu2+ on the triple-stranded helical structure of poly(A:2I) was studied by means of circular dichroism spectral method with the help of ultraviolet spectral and ethidium bromide fluorescence probe methods. It was found that Cu2+ destabilizes the structure of the triple helix poly(A:2I) and induces its structural transformations, meanwhile, the transformations can be partially reversed by a higher NaCl concentration. The structural transformations may be expressed by the following scheme: poly(A:2I) - poly(A:I) + poly(I)- poly(A) + 2poly(I)