着装方式对服装隔热性作用规律的研究

利用姿态可调式暖体假人研究了着装姿势对服装隔热性的作用和影响规律。研究指出边界静止空气层的隔热值Ia与暖体假人的测试姿势无关，着装姿势影响服装的隔热保暖性能并从传热学角度分析了原因。     

三维内肋管内插入螺旋扭带的强化传热实验

本文分别以水和乙二醇为工质，在Ｒｅ数范围为：６００～４００００，Ｐｒ数范围为：５．５～１１０之间，对四根分别插入三种不同扭率螺旋扭带的三维内助管内的换热和流阻特性进行了实验研究。结果表明：三维内肋管内加装扭带的强化传热技术适用于低Ｒｅ数下高Ｐｒ数工质的管内对流换热强化。根据实验值得到了流阻和换热关联式。     

Parabolic Harnack inequality for divergence form second order differential operators

Old and recent results concerning Harnack inequalities for divergence form operators are reviewed. In particular, the characterization of the parabolic Harnack principle by simple geometric properties -Poincaré inequality and doubling property- is discussed at length. It is shown that these two properties suffice to apply Moser's iterative technique.     

Thermal conductivity of poly(vinyl chloride)/polycaprolactone blends

Thermal diffusivity, heat capacity, and density of polyvinyl chloride/polycaprolactone (PVC/PCL) blends were measured by the laser flash method, DSC, and pycnometry, respectively. The thermal conductivity of the PVC/PCL blends was determined from the results. The miscibility of the blend and crystallinity of PCL were determined by DSC. The effect of blend structure on thermal conductivity is discussed. The phase compositions of the PVC/PCL blends are of three types depending on PCL content: i.e., up to 33%, from 33 to 70%, and above 70% PCL by weight. Thermal conductivity, thermal diffusivity, and heat capacity of the PVC/PCL blends are strongly affected by the phase composition of the blend, which changes in a complicated way with PCL content. © 1994 John Wiley & Sons, Inc.     

Towards understanding the increase in strength of thermotropic polyesters with heat treatment

Thermotropic copolyester fibers of oxynaphthoate and oxybenzoate have been subjected to conditions that promote solid-state polymerization as well as annealing. The annealing process causes the crystals to perfect with a simultaneous increase in heat of fusion and melting temperature. Solid-state polymerization, a reaction rate-controlled process, causes the polymer viscosity average molecular weight to increase by chain extension from about 14,000 g/mole to more than 87,000 g/mole with a simultaneous impressive increase in tenacity from about 10 g/d (1.2 GPa) to almost 30 g/d (3.7 GPa). To understand the changes in mechanical properties, we have modeled the fiber structure as short rod-like molecules poorly bonded to a continuous matrix of parallel molecules. Lengthening of the reinforcing molecules facilitates better transfer of load from matrix to molecules, resulting in higher tenacity fibers. © 1994 John Wiley & Sons, Inc.     

Application of heat flow calorimetry to the study of oilwell cements

The majority of previous studies of the hydration of cements using heat flow calorimetry have been carried out isothermally. However, with oilwell cements the slurry is mixed on the surface at ambient temperature and then gradually increases in temperature as it is pumped down the well. A Setaram C-80 calorimeter has been used to simulate the temperature ramp in API oilwell cement test schedules. This approach has enabled cementing reactions to be studied for the first time under conditions approaching those encountered in the field, and has shown that the results obtained from isothermal experiments may be misleading.The permission of the British Petroleum Company PLC to publish this paper is gratefully acknowledged.     

固体比热测量的实验改进

对现有的大学物理固体比热实验步骤做出必要的改进,使学生能在有限的时间内熟练使用精密天平,并较好地完成铜块的比热测量.同时,这样的改进又能使学生对用外推法进行物理量测量有一个初步的了解.     

Account for Energy Accommodation in Calculating the Heat Transfer between Coaxial Cylinders

A dependence of the heat transfer between coaxial cylinders on the energy accommodation coefficient is obtained. The known methods of solving a kinetic equation are compared.     

热工设备的模糊设计方法

该文运用模糊数学理论分析热工设备设计的不确定性问题，讨论模糊设计方法的应用，以热管式空气预热器为例进行模糊设计计算。     

放射性废树脂水泥固化中水化热的降低

降低放射性废树脂水泥固化中水化热可以降低温度应力、减少裂纹。比较了添加沸石、轻烧高岭石粉、矿渣和粉煤灰对ASC特种水泥树脂固化体抗压强度的影响。根据强度测试结果,选择了使固化体强度可以满足要求的配方。通过比较相同散热条件下所选配方的最高中心温度,选择得到了添加20%沸石的最佳配方。实测了用最佳配方进行200L固化的温度曲线。结果表明:该配方的最高温度为75.4℃,且固化体表面不出现裂纹,树脂包容量体积分数达到55%～60%,实现了放射性废树脂的高效固化。