关于理想气体任意准静态直线过程的最高温度点与吸放热转折点

讨论理想气体任意准静态直线过程吸热放热问题时，关键是如何确定过程中吸放热转折点的位置．阐述了最高温度点与吸放热转折点并不重合的原因，并给出了确定最高温度点和吸放热转折点的方法．     

Unconventional antiferromagnetic correlations of the doped Haldane gapsystem Y 2 BaNi 1 - x Zn x O 5

We make a new proposal to describe the very low temperature susceptibility of the doped Haldane gap compound Y₂BaNi_1-xZn_xO₅. We propose a new mean field model relevant for this compound. The ground state of this mean field model is unconventional because antiferromagnetism coexists with random dimers. We present new susceptibility experiments at very low temperature. We obtain a Curie-Weiss susceptibility χ( T ) ∼ C /(Θ + T ) as expected for antiferromagnetic correlations but we do not obtain a direct signature of antiferromagnetic long range order. We explain how to obtain the “impurity” susceptibility ( T ) by subtracting the Haldane gap contribution to the total susceptibility. In the temperature range [1 K, 300 K] the experimental data are well fitted by T ( T ) = C _imp 1 + T _imp / T . In the temperature range [100 mK, 1 K] the experimental data are well fitted by T ( T ) = A ln( T / T _c ), where T _c increases with x. This fit suggests the existence of a finite Néel temperature which is however too small to be probed directly in our experiments. We also obtain a maximum in the temperature dependence of the ac-susceptibility ( T ) which suggests the existence of antiferromagnetic correlations at very low temperature. Received 17 July 2001     

Zeroth and second laws of thermodynamics simultaneously questioned in the quantum microworld

A new and rather trivial model is suggested with mechanism that implies simultaneous violation of the zeroth and the second laws of thermodynamics. Mathematically rigorous quantum theory reduces to a trivial application of the Golden rule formula. It yields exciton on-energy-shell diffusion caused by bath-nonassisted excitation hopping between tails of different exciton site levels ε₁ < ε₂ broadened by bath-assisted finite life-time effects. The elastic character of the hopping implies 1 ↔ 2-symmetric transfer rate W. Thus the net diffusion exciton flow W(P ₁ - P ₂) and also, as argued, the net energy flow are possible due to different near-to-equilibrium exciton populations P ₁ > P ₂. As the sites are provided with two different baths, the population imbalance and the flows survive even for slightly different local bath temperatures T ₁ < T ₂ < T ₁ε₂/ε₁. Thus spontaneous exciton and also energy flows against temperature step become possible, in contradiction with the Clausius form of the second law. Violations of both the laws disappear in the high-temperature, i.e. classical limit Received 16 May 2001 and Received in final form 20 September 2001     

提高石油化工企业原料利用率的技术研究

坚持眼睛向内,挖潜增效,这是当前原油变重、供应量不足,生产资料涨价的客观形势下走出困境、提高企业效益的主要途径之一,本文从拓宽催化回炼油的利用途径,催化和加氢裂化互换循环油加工,优化重油原料的安排,提高轻油头的化肥效益,挤出烷基化原料,开发异丁烷的化工用途及油化结合等方面,分析通过厂际装置间的原料互供、生产优化来挖掘企业内涵,提高经济效益.     

Recursive method for building Arnold’s triangle X p (a,b)

We give a recursive method for building X _p (a,b) for each prime p. Arnold’s triangle is composed of positive integers: for a>1 and 0<b<a, X _p (a,b) is the degree of the highest power of p dividing the difference of the binomial coefficients C _pa ^pb −C _a ^b .      

置换环上的稳定矩阵

本文证明了置换环上的正则稳定矩阵是幂等矩阵和可逆矩阵的积,进一步证明了置换环上的正则稳定矩阵可以对角化。     

基于方阱模型计算液体的导热率

为了满足工程上对液体导热率的要求,在方阱模型基础上提出了计算液体导热率的方程。所得的导热率计算方程包括分子平动贡献项和分子内部能量贡献项。为了计算方便,根据分子模拟数据提出了计算中所需的方阱流体的径向分布函数的关联式。物质的能量参数由其临界温度估算,而硬壳体积则由基团贡献法获得。考虑到实际液体有别于方阱流体,在实际液体导热率计算中引入了一个与密度有关的校正参数。使用该文提出的方法,对液体氩及10种液态烃类物质的导热率进行了计算,其计算的平均相对误差小于5.3%。     

Boiling heat transfer characteristics of nanofluids in a flat heat pipe evaporator with micro-grooved heating surface

An experimental study was performed to understand the nucleate boiling heat transfer of water–CuO nanoparticles suspension (nanofluids) at different operating pressures and different nanoparticle mass concentrations. The experimental apparatus is a miniature flat heat pipe (MFHP) with micro-grooved heat transfer surface of its evaporator. The experimental results indicate that the operating pressure has great influence on the nucleate boiling characteristics in the MFHP evaporator. The heat transfer coefficient and the critical heat flux (CHF) of nanofluids increase greatly with decreasing pressure as compared with those of water. The heat transfer coefficient and the CHF of nanofluids can increase about 25% and 50%, respectively, at atmospheric pressure whereas about 100% and 150%, respectively, at the pressure of 7.4 kPa. Nanoparticle mass concentration also has significant influence on the boiling heat transfer and the CHF of nanofluids. The heat transfer coefficient and the CHF increase slowly with the increase of the nanoparticle mass concentration at low concentration conditions. However, when the nanoparticle mass concentration is over 1.0 wt%, the CHF enhancement is close to a constant number and the heat transfer coefficient deteriorates. There exists an optimum mass concentration for nanofluids which corresponds to the maximum heat transfer enhancement and this optimum mass concentration is 1.0 wt% at all test pressures. The experiment confirmed that the boiling heat transfer characteristics of the MFHP evaporator can evidently be strengthened by using water/CuO nanofluids.     

Thermochemically induced binding of methyl orange to polycations containing primary amine groups

The thermochemical transformation of electrostatically formed complexes of methyl orange (MO) with polycations containing primary amine groups such as ammonium salts afforded new polymers with a high concentration of covalently bound 4‐N,N‐dimethylaminoazobenzene groups in the side chain. Poly(allylamine hydrochloride) and poly(β‐aminoethylene acrylamide hydrochloride) were employed as support polycations for MO. The transformation of sulfonate–ammonium ion pairs into sulfonamide bonds, via heating at an elevated temperature, was supported by the polymer properties before and after the thermal treatment. The polymer structure changes were monitored with elemental analysis, Fourier transform infrared, ¹H NMR, and ultraviolet–visible absorption spectroscopy, and thermogravimetric analysis. The spacer length between the backbone and azobenzene structures used as side chains strongly influenced the polymer properties before and after the heat‐induced reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5898–5908, 2006     

Investigation of sulfonated poly(ether ether ketone sulfone)/heteropolyacid composite membranes for high temperature fuel cell applications

The sulfonated poly(ether ether ketone sulfone) (SPEEKS)/heteropolyacid (HPA) composite membranes with different HPA content in SPEEKS copolymers matrix with different degree of sulfonation (DS) were investigated for high temperature proton exchange membrane fuel cells. Composite membranes were characterized by Fourier transfer infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). FTIR band shifts suggested that the sulfonic acid groups on the copolymer backbone strongly interact with HPA particles. SEM pictures showed that the HPA particles were uniformly distributed throughout the SPEEKS membranes matrix and particle sizes decreased with the increment of copolymers' DS. The holes were not found in SPEEKS‐4/HPA30 (consisting of 70% SPEEKS copolymers with DS = 0.8 and 30% HPA) composite membrane after composite membranes were treated with boiling water for 24 h. Thermal stabilities of the composite membranes were better than those of pure sulfonated copolymers membranes. Although the composite membranes possessed lower water uptake, it exhibited higher proton conductivity for SPEEKS‐4/HPA30 especially at high temperature (above 100 °C). Its proton conductivity linearly increased from 0.068 S/cm at 25 °C to 0.095 S/cm at 120 °C, which was higher than 0.06 S/cm of Nafion 117. In contrast, proton conductivity of pure SPEEKS‐4 membrane only increased from 0.062 S/cm at 25 °C to 0.078 S/cm at 80 °C. At 120 °C, proton conductivity decreased to poor 0.073 S/cm. The result indicated that composite membranes exhibited high proton conductivity at high temperature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1967–1978, 2006