Engineering of hydrophilic and plasmonic properties of Ag thin film by atom beam irradiation

Hydrophilic Ag nanostructures were synthesized by physical vapour deposition of 5 nm Ag thin films followed by irradiation with 1.5 keV Ar atoms. Optical absorbance measurements show a characteristic surface plasmon resonance absorption band in visible region. A blue-shift in absorbance from 532 to 450 nm is observed with increasing fluence from 1 × 10¹⁶ to 3 × 10¹⁶ atoms/cm². Atomic force microscopy was performed for the pristine and irradiated samples to study the surface morphology. The atom beam irradiation induced sputtering and surface diffusion lead to the formation of plasmonic surface. Rutherford backscattering spectroscopy of the pristine and irradiated film indicates that metal content in the film decreases with ion fluence, which is attributed to the sputtering of Ag by Ar atoms. The contact angle measurement demonstrates the possibility of engineering the hydrophilicity by atom beam irradiation.     

Effect of Temperature and Comonomer Content on Thermal Behavior and Crystallization Property of the Propylene–Ethylene Random Copolymers

The effects of ethylene units content and crystallization temperature on the conformations, and the thermal and crystallization behavior were investigated by a combination of Fourier transform infrared (FTIR) spectroscopy, wide angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC). The characterization of FTIR spectroscopy proves that the longer helical conformation sequences of the propylene–ethylene random (PER) samples decrease, whereas the shorter helical conformation sequences increase with the increase in ethylene units content. The increase of the shorter helical conformation sequences is favorable for the formation of the γ-phase in the crystals. A group of broad endothermic peaks can be seen clearly in the DSC curves of PER copolymers, which may be associated with the melting of mixtures of the α- and γ-forms in the crystals. The melting point, crystallization temperature, and crystallinity degree of the PER copolymers decrease with the increase in ethylene units contents. Three typical melting peaks of the PER copolymers crystallized isothermally between 80°C and 130°C were observed. The two higher melting peaks result from melting of the α- and γ-phase in the crystals, whereas the materials crystallized on quenching give the lowest peak. The WAXD results confirm that the PER copolymers crystallize from the melt, as mixtures of α and γ forms, in a wide temperature range. The critical number ζ_lim of the crystallizable units for the α-form increases with the increase in crystallization temperature for PER copolymers, which is favorable for the formation of the γ phases. The amount of γ-form increases with the increase in crystallization temperature at the expense of its α component, then reaches a maximum value at the crystallization temperature of 115°C, and finally decreases with further increase in the crystallization temperature.     

射流注入角对平板气膜冷却特性影响的实验研究

本文对不同射流注入角的典型单排孔冷却结构的平板气膜冷却特性进行了实验研究,研究对象为轴线与主流来流方向分别成30°、60°、90°的射流孔板,对它们在吹风比为0.5、1.0、1.5条件下的射流孔下游的绝热气膜冷却效率分布特性进行了分析.在吹风比M=0.5时,三个射流注入角条件下近孔区域都能形成较好的冷气覆盖效果;M=1.0时,三者的下游横向平均冷却效率基本相同;M=1.5时,注入角60°的条件下冷却效果最好.     

X射线能量谱间接测量方法

X光机的X射线能量谱在CT图像硬化校正、散射校正和定量CT成像等技术中扮演着重要角色。提出了一种通过由质量衰减系数已知的材料构成的楔型模体的扫描数据来恢复X射线能量谱的方法。经GEANT4模拟数据及实采数据验证,该方法能够较好地恢复X光机的X射线能量谱。通过仿真实验,分析了在几个常用电压下模体材质和厚度对恢复X射线能量谱的影响。     

外形分析-拟合求导法测接触角

在外界来流作用下,液滴在固体表面上呈现周期性振荡特性,接触角的动态变化是表征该过程特性的重要参数, 传统方法不适用此接触角测量。在分析常用接触角测量方法的基础上,提出外形分析-拟合求导法测量动态接触角,同经典测量方法对比表明,外形分析-拟合求导法可很好地满足测量精度要求。     

Stereoscopic video surveillance system for detection of target’s 3D location coordinates and moving trajectories

In this paper, a novel stereoscopic video surveillance system to track a target person and detect its three-dimensional (3D) location coordinates and moving trajectory is implemented by using the pan/tilt-controlled stereo camera system. Stereoscopic video images of a target person are captured with stereo camera system and the target face and its location in the left image plane can be detected by use of YCbCr color model and centroid method. Also the target location in the right image plane can be obtained through correlation between the left face image and the right image by using the binary phase extraction joint transform correlator (BPEJTC) algorithm. With these location data of the target face in the left and right image planes the pan/tilt systems can control the stereo camera to track a target person by positioning the target face at the center of the camera’s FOV and making the focusing points of the right and left camera coincided on the target face. And then, with the resultant pan/tilt angles and geometric parameters of the stereo camera system, the target’s real 3D location coordinates and moving trajectory in the world space can be obtained. From some experiments with 900 frames of stereoscopic video image pairs, it is analyzed that the target’s center location after being tracked is kept to be very low error ratio of 0.62%, 2.04% on the average in the x, y directions of the image plane, respectively. Also, the error ratio between the calculated and measured values of the 3D location coordinates of a target person is found to be very low value of 2.1%, 5.7% on the average in the X and Y directions of the real world space, respectively.     

Dynamic hydrophobicity of water droplets on the line-patterned hydrophobic surfaces

Static and dynamic hydrophobicities of water droplet on a patterned surface prepared using fluoroalkylsilanes with different molecular chain lengths were investigated. Contact angles on the patterned surfaces well agreed with values predicted using Cassie’s theory. On the same line width ratio, total retention force was governed by the fluoroalkylsilane with slow-sliding acceleration. The total retention force decreased with the decreasing width ratio of silane with slow-sliding acceleration on the surface. These results imply that the sliding acceleration of water droplets on a hydrophobic surface depends both on chemical composition and patterning structure.     

13C direct detected COCO-TOCSY: a tool for sequence specific assignment and structure determination in protonless NMR experiments

A novel experiment is proposed to provide inter-residue sequential correlations among carbonyl spins in (13)C detected, protonless NMR experiments. The COCO-TOCSY experiment connects, in proteins, two carbonyls separated from each other by three, four or even five bonds. The quantitative analysis provides structural information on backbone dihedral angles phi as well as on the side chain dihedral angles of Asx and Glx residues. This is the first dihedral angle constraint that can be obtained via a protonless approach. About 75% of backbone carbonyls in Calbindin D(9K), a 75 amino acid dicalcium protein, could be sequentially connected via a COCO-TOCSY spectrum. 49 [Formula: see text] values were measured and related to backbone phi angles. Structural information can be extended to the side chain orientation of aminoacids containing carbonyl groups. Additionally, long range homonuclear coupling constants, (4)J(CC) and (5)J(CC), could be measured. This constitutes an unprecedented case for proteins of medium and small size.     

Sensitivity-enhanced IPAP-SOFAST-HMQC for fast-pulsing 2D NMR with reduced radiofrequency load

The SOFAST-HMQC experiment [P. Schanda, B. Brutscher, Very fast two-dimensional NMR spectroscopy for real-time investigation of dynamic events in proteins on the time scale of seconds, J. Am. Chem. Soc. 127 (2005) 8014-8015] allows recording two-dimensional correlation spectra of macromolecules such as proteins in only a few seconds acquisition time. To achieve the highest possible sensitivity, SOFAST-HMQC experiments are preferably performed on high-field NMR spectrometers equipped with cryogenically cooled probes. The duty cycle of over 80% in fast-pulsing SOFAST-HMQC experiments, however, may cause problems when using a cryogenic probe. Here we introduce SE-IPAP-SOFAST-HMQC, a new pulse sequence that provides comparable sensitivity to standard SOFAST-HMQC, while avoiding heteronuclear decoupling during (1)H detection, and thus significantly reducing the radiofrequency load of the probe during the experiment. The experiment is also attractive for fast and sensitive measurement of heteronuclear one-bond spin coupling constants.     

Improvement of water and oil repellency on wood substrates by using fluorinated silica nanocoating

We have investigated a one-step fabrication of fluoro-containing silica coating on wooden substrates, showing multi-functions including super repellency toward water and sunflower oil, low sliding angles, good durability, and low adsorption capacity of moisture. The repellent slurry, consisting of well-mixing silica nanospheres and perfluoroalkyl methacrylic copolymer, is simply prepared and subsequently sprayed over wooden substrates with good adhesion. It has shown that the decoration of silica nanospheres on microscaled wooden texture acts as a crucial role in improving the repellency toward water and sunflower oil droplets. The maximal contact angles can reach as high as 168.3° and 153.6° for water and sunflower oil drops, respectively. These analyses of wetted fraction and work of adhesion also demonstrate the improved repellency due to the addition of silica. This improvement of the repellencies is ascribed to the fact that the drops partially sit on F-coated silica spheres, leaving a layer of air underneath the droplet (i.e., Cassie state). On the basis of the results, the multi-functional coating on wooden substrates delivers a promising commercial feasibility on a variety of woodworks.