沙枣树的出胶与树龄的关系

对沙枣树(E laeagnus angustif olia L.)的出胶进行了不同树龄的比较.结果表明,成熟林的出胶率低而出胶量高,过熟林则相反,是出胶率高而出胶量低.出胶率高是病虫害侵染所致,而出胶量高则是生理活性强的表现.沙枣树的出胶受自身生理活性作用和受害反应的影响.沙枣树的出胶率和出胶量都随气温的增加而明显增加.建议沙枣胶的生产应该在新疆炎热的南疆地区进行,加强对成熟林和过熟林的管理复壮,有利于提高沙枣树的产胶量.     

Solvent Casting and UV Photocuring for Easy and Safe Fabrication of Nanocomposite Film Dressings

The aim of this work was to optimize and characterize nanocomposite films based on gellan gum methacrylate (GG-MA) and silver nanoparticles (AgNPs) for application in the field of wound dressing. The films were produced using the solvent casting technique coupled with a photocuring process. The UV irradiation of GG-MA solutions containing glycerol as a plasticizer and different amounts of silver nitrate resulted in the concurrent crosslinking of the photocurable polymer and a reduction of Ag ions with consequent in situ generation of AgNPs. In the first part of the work, the composition of the films was optimized, varying the concentration of the different components, the GG-MA/glycerol and GG-MA/silver nitrate weight ratios as well as the volume of the film-forming mixture. Rheological analyses were performed on the starting solutions, whereas the obtained films were characterized for their mechanical properties. Colorimetric analyses and swelling studies were also performed in order to determine the AgNPs release and the water uptake capacity of the films. Finally, microbiological tests were carried out to evaluate the antimicrobial efficacy of the optimized films, in order to demonstrate their possible application as dressings for the treatment of infected hard-to-heal wounds, which is a demanding task for public healthcare.     

文物中多糖类胶结材料的热裂解-气相色谱/质谱识别

热裂解-气相色谱/质谱(Py-GC/MS)技术能够实现微量样品中有机组分的准确、快速检测,非常适用于文物中各类天然有机材料的定性分析。该研究以中国古代书画、建筑、器物等文化遗产中常用的淀粉、桃胶,以及西方文化遗产中常用的阿拉伯胶等多糖类胶结材料为研究对象,系统分析并总结各类材料的Py-GC/MS特征裂解组分及辨别方法。研究发现,淀粉、桃胶、阿拉伯胶在色谱保留时间前段的裂解产物基本一致,主要是小分子呋喃、酮类组分;在保留时间中段3类材料的裂解产物主要是呋喃型酮等组分,但不同材料的具体裂解组分差异明显;在保留时间后段,3类材料检出多种单糖衍生物以及单糖低聚体衍生物,其中桃胶与阿拉伯胶裂解组分较为接近,但与淀粉完全不同。因此,可根据不同保留时间段淀粉、桃胶、阿拉伯胶裂解产物的差异实现3类材料的辨别,其中1,6-脱水-β-D-吡喃葡萄糖只在淀粉中检出且色谱峰强度高,可以作为识别淀粉的特征组分;此外,可根据桃胶、阿拉伯胶在保留时间后段的裂解产物主要质谱碎片离子m/z 60、m/z 101的提取离子流图分布特征实现其辨别。基于所建立的Py-GC/MS方法,研究推断故宫旧藏清代剔红云龙纹天球瓶瓶口部...     

亚麻饼粕中亚麻胶的提取及其理化性质研究

采用水浸提法从亚麻饼粕中提取亚麻胶.通过单因素实验和正交试验,得到提取亚麻胶的最佳条件:料液比为1∶125,温度为70℃,提取时间为90 min,洗胶次数为1次.在此条件下亚麻胶的提取率可达32.0%.同时,研究了浓度、pH值、温度对亚麻胶溶液粘度及浓度对乳化率的影响.     

Mg-Fe-HTlc对黄原胶流变性的影响

研究了荷负电高分子物质黄原胶(XG)及类水滑石HTlc/XG复合悬浮体系的流体类型及触变性. 结果发现, 供试体系流变曲线都符合Herschel-Bulkley模型. 在0.05～0.20 wt%范围内, 随XG含量增加, XG溶液表现出由假塑性流体到塑性流体的转变, 没有触变性|1.5 wt%纯HTlc悬浮体系为牛顿流体, 无触变性. 当HTlc/XG质量比为29.0～6.5时(复合悬浮体系固含量保持为1.5%), 体系均表现为假塑性流体|除HTlc/XG质量比为29.0体系无触变性外, 其它复合悬浮体系均表现为正触变性.     

松香催化加氢过程中树脂酸组成变化的跟踪分析

利用自行改进的DEAE-Sephadex离子交换色谱和气相色谱-质谱-计算机联用(GC-MS-DS)技术研究了在Raney Ni 存在下脂松香催化加氢反应过程中各类树脂酸组成的变化。证实在本实验条件下松香催化加氢过程中的主体反应是树脂酸的二氢化,只伴随少量的四氢化和极少量的脱氢反应。发现在二氢海松酸/异海松酸型树脂酸的分子间存在因双键移位而引起的异构现象。在整个跟踪分析过程中,共检出7种二氢枞酸型树脂酸、5种二氢海松酸/异海松酸型树脂酸及3种四氢树脂酸。     

A High Performance Flocculating Agent and Viscosifiers Based On Cationic Guar Gum

The anionic, cationic and nonionic polymeric flocculants endowed with several distinguished characteristics are being increasingly applied for the treatment of industrial effluents, municipal and wastewater. For the treatment of highly negatively charged particle suspensions, cationic flocculants are more efficient. A new route to guar gum derivatives bearing cationic groups has been developed. A series of cationic guar gums (Cat GG) have been developed by incorporating a cationic moiety N- (3- Chloro-2- hydroxypropyl) trimethyl ammonium chloride (CHPTAC) onto the backbone of guar gum in presence of NaOH. The various grades of cationic guar gum have been characterized by elemental analysis, FTIR spectroscopy and intrinsic viscosity measurement. The flocculation characteristics of these cationic guar gums have been evaluated in silica suspension by jar test. It has been found that among the various grades of cationic guar gums, the one with longer CHPTAC chains shows better performance. The flocculation characteristics of this best performing cationic guar are compared with those of various commercially available flocculants in silica suspension. Their rheological investigations have also been undertaken.     

Macromolecular dimensions and mechanical properties of monolayer films of Sonorean mesquite gum

Mesquite gum sourced from Prosopis velutina trees and gum arabic (Acacia spp.) were characterized using light scattering and Langmuir isotherms. Both gum materials were fractionated by hydrophobic interaction chromatography, yielding four fractions for both gums: FI, FIIa, FIIb and FIII in mesquite gum and FI, FII, FIIIa and FIIIb in gum arabic. In mesquite gum, the obtained fractions had different protein content (7.18-38.60 wt.-%) and macromolecular dimensions (M approximately 3.89 x 10(5)-8.06 x 10(5) g.mol(-1), RG approximately 48.83-71.11 nm, RH approximately 9.61-24.06 nm) and architecture given by the structure factor (RG/RH ratio approximately 2.96-5.27). The mechanical properties of Langmuir monolayers at the air-water interface were very different on each gum and their fractions. For mesquite gum, the most active species at the interface were those comprised in Fractions IIa and IIb and III, while Fraction I the pi/A isotherm lied below that of the whole gum. In gum arabic only Fraction III developed greater surface pressure at the same surface per milligram of material than whole gum. This is rationalized in terms of structural differences in both materials. Mesquite gum tertiary structure seems to fit best with an elongated polydisperse macrocoil in agreement with the "twisted hairy rope" proposal for arabinogalactan proteoglycans.     

苎麻脱胶煮练工艺数学模型的研究

本文以数学理论为依据,以电子计算机为辅助工具,利用四因子二次通用旋转组合设计试验计划,建立了苎麻脱胶煮练工艺的数学模型,首次定性定量地给出了精干麻质量随煮练工艺参数的改变而变化的规律,对于苎麻高效脱胶的研究和工业化生产都有一定的积极意义     

羧甲基羟丙基瓜尔胶的流变特性

考查了羧甲基羟丙基瓜尔胶溶液的流变特性,发现其水溶液呈典型的假塑性,不同浓度下溶液表观粘度随剪切速率的变化可以用Ostwald-Dewaele方程描述;零切粘度与温度的关系符合Andrade方程;溶液的粘度在酸性条件下随溶液pH的减小迅速降低,在碱性条件下则变化不大;溶液对NaCl很敏感,表现出典型的聚电解质的特征。