Photopolymeritation of Methyl Methacrylate and Styrene by Sulfur Ylides

The photoinitiating ability of some sulfur ylides was studied. Diphenylsulfonium bis (methoxycarbony1)methylide (DPSY) could photoinitiate methyl methacrylate and styrene. A free radical mechanism was confirmed by a kinetic study, the inhibiting effect of benzoquinone, and the copolymer composition. From an analysis of the photodecomposition products it is suggested that the phenyl radical generated from the bond fission between the sulfur atom and the phenyl group participates in the initiation of this free radical polymerization. Methylphenylsulfonium bis (methoxycarbonyl) methylide, as well as DPSY, served as a photoinitiator, but dimethylsulfonium bis (methoxycarbony1)methylide did not. The differences are explained based on UV spectra.     

Polymers Derived from 4-Substituted Salicylic Acids as Antifungal Agents

4-Amino-, chloro-, and bromo-substituted salicylic acid-formaldehyde polymers and their metal chelates were screened for their antifungal activity. Various copolymers prepared from 4-chloro-(bromo)salicylic acid, formaldehyde, and other comonomers were also screened for their antifungal activity. All these polymers, copolymers, and polychelates were found active against several fungi Their fungicidal activities are compared with those of the corresponding monomers and monomeric chelates.     

Feasibility of Polyvinyl Alcohol as a Transdermal Drug Delivery System for Terbutaline Sulphate

A series of terbutaline sulphate drug incorporated polyvinyl alcohol (PVA) matrix films were produced by the solvent evaporation method. The effect of xanthan gum and plasticizers (propylene glycol and dibutyl phthalate) on the rate and amount of drug diffusion from PVA membrane across the hydrated cellophane membrane has been evaluated, using an open glass diffusion‐tube. The obtained films were clear, smooth and flexible having sufficient mechanical strength. The mechanical performance of the dry PVA films with xanthan gum and plasticizers were also ascertained. Polyvinyl alcohol‐xanthan gum blends showed a high rate of drug release compared to that of polyvinyl alcohol film alone. Among the two plasticizers employed, propylene glycol showed better permeability. Among different formulations studied, the formulation PVA/xanthan gum/propylene glycol (F7) was found to be an optimized composition for efficient transdermal delivery of the model drug, terbutaline sulphate. The mechanism of drug diffusion has been evaluated using the Peppas model. Stability studies carried out on polymer‐drug formulations revealed that the drug is stable at 40°C and 75% RH for a period of 6 weeks.     

Physical and Rheological Characteristics of Emulsion Model Structures Containing Iranian Tragacanth Gum and Oleic Acid

The physical and rheological properties of oil in water model emulsion systems containing Iranian tragacanth gum (TG) (0.5, 1 g/100 ml emulsions), whey protein isolate (WPI) (2, 4 g/100 ml emulsions), and oleic acid (5, 10 ml/100 ml emulsions) were investigated for droplet-size distribution, creaming index, and rheological properties of emulsions. The shear-thinning behavior of all dispersions was modeled using power law, Cross, and Ellis models. The power law model described the flow behavior of dispersions for its lowest standard error (0.29) and highest determination coefficient (R²) (0.99). Rheological investigation showed that both loss (G″) and storage (G′) modules increased as gum and oil content increased. Delta degree was 0.1 and increased as frequency increased, indicating that liquid-like viscose behavior dominated solid-like elastic behavior. Droplet-size distribution was measured by light scattering and microscopic observations revealed a flocculated system. Gum, WPI, and oil contents decreased the emulsion creaming index with gum concentration having the greatest effect.     

Photo-induced Synthesis and Characterization of Poly（methyl methacrylate） Grafted Sodium Salt of Partially Carboxymethylated Guar Gum

Photo-induced graft copolymerization of methyl methacrylate（MMA） onto sodium salt of partially carboxymethylated guar gum（Na-PCMGG, DS = 0.291） was carried out in an aqueous medium using ceric ammonium nitrate（CAN） as photoinitiator to synthesize a novel graft copolymer, Na-PCMGG-g-PMMA, which may find its potential application as a metal adsorbent. The influences of synthesis variables such as concentrations of photoinitiator（CAN）, nitric acid and monomer（MMA） as well as reaction time, temperature and amount of substrate on the grafting yields were studied and the reaction conditions for optimum photo-grafting were evaluated. At optimum concentration, the maximum values of the grafting yields achieved were G = 271.61% and GE = 63.89%. The experimental results were found to be in very good agreement with the proposed kinetic scheme. The photo-graft copolymerization of MMA onto Na-PCMGG（ DS = 0.291） was also carried out in the presence and absence of ultraviolet radiation for studying the efficiency of the photoinitiator. The influence of carboxymethyl groups introduced onto the guar gum molecules with regard to its behavior towards ultra-violet radiation induced grafting with MMA was also investigated. Photo-grafting process was confirmed and the products were characterized with the help of the spectroscopic（1H-NMR and FTIR） and SEM techniques.     

松香中枞酸型树脂酸的MNDO研究

应用半经验MNDO量子化学计算方法确定了松香中4种枞酸型树脂酸的优化几何构型及相对能量，据此对该类树脂酸分子的构象及相对稳定性作了分析与预测，并与已知的实验结果作了对比。     

浅谈黄原胶及其在农药制剂加工中的应用

黄原胶是极具发展潜力的生物多糖,独特的分子结构使其具有良好的增稠、乳化和稳定作用,已被广泛应用于日用化工、石油开采、纺织印染、食品、医药、涂料、农药等众多工业领域,拥有广阔的市场前景。本文对黄原胶的结构、特性、生产工艺以及主要应用领域等进行了简单综述,总结了黄原胶在农药制剂加工中的应用现状,指出黄原胶优越的流变特性对悬浮剂、水乳剂、悬乳剂等农药制剂悬浮稳定性的提高具有重大意义,最后展望了黄原胶未来的发展前景。     

在阿拉伯树胶存在下,罗丹明B—硅钼杂多酸缔合物分光光度法测定铝合金中的痕量硅

本文研究了硅钼杂多酸—罗丹明B—阿拉伯树胶显色体系,从而建立了水相测定硅的高灵敏度分光光度法,应用于铝合金中痕量硅的测定,结果较满意。     

溶氧对黄原胶发酵的影响

黄原胶是野油菜黄单孢菌分泌的胞外多糖,可用淀粉或葡萄糖为碳源发酵生产。本文着重以淀粉为碳源研究不同的溶氧水平对多糖的影响。试验结果表明:溶氧水平高于饱和度的20%对多糖发酵影响不大,低于20%时菌的生长受影响。溶氧水平为饱和度的25%,菌体生长最佳。