Atomically Dispersed Pd Atoms on a Simple MgO Support with an Ultralow Loading for Selective Hydrogenation of Acetylene to Ethylene

We report a simple and efficient Pd/MgO catalyst loaded with ppm level of Pd (7.8 ppm) for semi-hydrogenation of acetylene to ethylene. The catalyst showed excellent performance with high acetylene conversion (97%), high ethylene selectivity (89%) and good stability. Moreover, the atomically dispersed Pd atoms are inactive for ethylene hydrogenation. Isotopic and FTIR results suggest that H₂ dissociates at isolated Pd atoms in a heterolytic manner forming O−H bond, which may account for the high selectivity.     

铈基催化剂在挥发性有机物催化燃烧治理中的研究进展

铈基催化剂由于其特殊的氧化还原性能在催化反应中得到了广泛应用,在非均相催化反应中其表面性质尤为重要.二氧化铈晶格中的氧缺陷对表面催化反应起着非常重要的作用,而二氧化铈可以有效调节催化剂表面酸碱性,修饰催化活性中心的结构,提高催化剂的储放氧能力,增强其结构稳定性和提高活性组分的分散度等.我们分别从二氧化铈催化剂的制备方法...     

Heterostructured composite of NiFe-LDH nanosheets with Ti4O7 for oxygen evolution reaction

Developing oxygen evolution reaction (OER) electrocatalyst based on earth-abundant materials holds great promise for ascertaining water-splitting to surmount its deprived kinetics. In this regard, NiFe-LDH (layered double hydroxide) receives considerable attention owing to their layered structure. However, they still suffer from poor electronic conductivity and structural stability. We combined NiFe-LDH nanosheets with Magnéli phase Ti₄O₇ into a heterostructured composite. A series of analyses reveal that decorating Ti₄O₇ facilitates charge transfer to enhance the conductivity of NiFe-LDH-Ti₄O₇. During electrochemical measurement, Ni²⁺ is transformed to metastable Ni³⁺ (Ni (OH)→ NiOOH) before the OER onset potential. Thus, the presence of Ni³⁺ as the main active sites could improve the chemisorption of OH^? to facilitate OER. As a result, the NiFe-LDH-Ti₄O₇ catalyst delivers as low as onset potential (1.43 V). Combining the holey structure (NiFe-LDH and Ti₄O₇) and the defect engineering generated on NiFe-LDH-Ti₄O₇ as a synergistic effect improves the OER performance. The inclusion of Ti₄O₇ in the composite leads to more vacancy sites, as evidenced by the extended X-ray absorption fine structure (EXAFS) analysis. The obtained defective structure with a low coordination environment would improve the electronic conductivity and facilitate the adsorption process of H₂O onto metal cations, thereby increasing the intrinsic catalytic activity of NiOOH. The strong coupling of NiFe-LDH and Ti₄O₇ also increases the stability, and the heterostructured composite helps maintain the structural robustness of the LDH.     

泡沫铝负载钌基催化剂应用于N2O的低温催化分解研究

将导热性能良好的泡沫铝作为载体,羰基钌为前驱体制备了一系列不同形态的钌基催化剂应用于N2O的低温催化分解研究.采用XRD、XPS、SEM、TEM、BET、H2-TPR等方法对催化剂进行了表征,于石英管固定床反应器上对催化剂性能进行了评价.重点考察了泡沫铝作为催化剂载体的可行性、载体的处理方法对催化剂活性的影响以及RuO2、Ru、Ru3(CO)12所表现出的活性差异.结果表明:泡沫铝作为催化剂载体,能够促进N2O的催化分解;泡沫铝经H2O2处理有利于提高其对活性中心的附着力,提高催化活性;N2O浓度为1%,Ru负载量为0.3%,活性中心分别为Ru3(CO)12、Ru、RuO2时,N2O完全转化温度依次为285、380和415℃;活性较高的Ru3(CO)12/泡沫铝催化剂在长时间作用后活性组分转变为RuO2.     

Geographic Characterization of Leccinum rugosiceps by Ultraviolet and Infrared Spectral Fusion

Leccinum rugosiceps is an edible mushroom belonging to genus Leccinum of Boletaceae. Its fruiting bodies are richer in nutrients than many vegetables and fruit. The model of support vector machine was established for the discrimination of L. rugosiceps from regions based on rapid and low-cost ultraviolet and infrared spectroscopies. The mid-level data fusion was performed by support vector machine. Compared to a single spectroscopic technique, mid-level data fusion provided higher accuracy by selecting the most significant variance from data matrixes based on partial least squares discriminant analysis. The accuracy of the classification of samples in the calibration and test sets were 85.00 and 94.74%, higher than separate measurements by ultraviolet or infrared spectroscopy. This approach has applications for authentication and quality assessment of L. rugosiceps.     

MoCo/Y, MoNi/Y氮化物催化剂的结构和CH4+CO2重整反应性能

采用氨气还原法制备了NaY分子筛负载的MoCo/Y、MoNi／Y双组氮化物催化剂，用XRD和EXAFS方法征了样品的结构，并测定了其在CH4＋CO2重整反应中的活性，在氧化态时，MoCo/Y样品中主要存在CoMoO4和Co3O4两种物相，Mo的配位状态接近于CoMoO4，而Co的配位状态更接近于Co3O4，MoNi／Y样品中主要有NiMoO4和NiO两种物相，Mo的配位状态接近于MiMoO4，而Ni的配位状态可能是NiMoO4和NiO两种化合物中Ni配位状态的平均效果，Ni-Mo之间的朴素作用似乎比Co-Mo相对较强，在氮化态时，两种样品中Mo的配位状态较为相似，但即不同于MoO3，也不同于单组分γ－Mo2N.Co和Ni的配位状态都不同于各在氧化态下的状态，且都在相同的位置出现一个新强峰，这似乎表明MoCo和MoNi生成了结构相似的氮化物，在CH4＋CO2重整反应中，氮化态MoCO/Y和MoNi/Y的活性大大超过非负载单组分γ－Mo2N催化剂，其中MoNi/Y的活性相对更好一些，且活性随Ni含量增加而提高。     

镁铝复合氧化物负载铜催化剂上甘油选择性氢解合成丙二醇

我们通过乙醇溶液浸渍法合成出了具有高分散度金属Cu 的Cu/MgO-Al₂O₃ (Mg/Al 原子比=1/1, 3/1, 4/1)、Cu/MgO 和Cu/Al₂O₃ 等催化剂. 在200℃, 6.0 MPa H₂ 和二氧六环溶剂中, 这些催化剂高选择性地将甘油氢解为1,2-丙二醇(选择性>90%), 而单位表面Cu 原子的甘油转化速率则随催化剂表面碱中心与Cu 原子比例的提高而增大. N₂O 化学吸附-H₂ 程序升温还原实验表明Cu 粒子的本征氢解能力不随其负载量以及载体中的Mg/Al 原子比发生明显改变, 加之碱性MgO-Al₂O₃ 载体本身不催化甘油的转化, 我们推测在甘油氢解反应中金属Cu 粒子与载体界面处的碱中心辅助Cu 粒子活化甘油分子的α 位C-H键, 从而加速甘油脱氢为甘油醛步骤以及甘油氢解反应的进行. CO₂程序升温脱附实验以及对甘油氢解反应中Cu/MgO-Al₂O₃ 催化剂稳定性的考察结果暗示在甘油氢解反应中起主要作用的碱中心是载体表面上与Mg²⁺键连的羟基基团(即B 碱OH^-). 这些对甘油氢解反应中金属中心与碱性中心协同作用的认识对进一步理性设计高效的甘油或其它多元醇分子氢解催化剂具有重要指导意义.     

噻吩加氢脱硫和四氢萘催化加氢反应中的载体和助剂的影响

 为了更好地认识加氢脱硫和催化加氢反应中的载体影响和助剂效应，在同样的催化剂制备方法及反应条件下，研究了噻吩加氢脱硫（HDS）和四氢萘催化加氢（HYD）反应．结果表明，对于无助剂的Mo和W催化剂，载体对催化活性的影响顺序为TiO2－Al2O3＞ZrO2＞Al2O3．助剂的添加改变了催化剂活性顺序．Ni助剂催化剂的活性明显高于Co助剂催化剂．ZrO2担载的添加Ni的Mo和W催化剂分别获得了最佳的HDS和HYD活性．然而，添加Pt的Mo和W催化剂其HDS和HYD活性仅是Pt与Mo（W）二者的加和，Pt与Mo（W）之间没有协同效应．先将担载的Mo和W预硫化再将助剂引入体系的催化剂制备方法可以避免Ni和Co过早硫化形成类硫化镍（或硫化钴）物相，与采用螯合物分子方法制备的催化剂间有一定的相似性．     

FT-IR and FT-FIR studies of vanadium,molybdenum and tungsten oxides supported on different carriers

In the far IR region at low molybdenum loadings, Mo-SiO₂ catalysts present a pseudomolybdate or a polymolybdate species, while bulk-like MoO₃ appears at loadings close to the geometrical monolayer coverage. W-SiO₂ and V-SiO₂ spectra show bands close to those observed on the corresponding bulk oxides.In the case of TiO₂, Al₂O₃, ZrO₂ supported catalysts, a band is observed near 1000 cm^–1 which is assigned to the Mo=O stretching vibration of coordinatively unsaturated Mo ⁿ⁺ ions showing a stronger interaction with the support than one observed on silica.     

高分子载体材料对青霉素酰化酶的固定化作用

介绍了天然高分子材料和合成高分子材料对青霉素酰化酶的固定化作用,着重讨论了高分子材料的制备、性质及其表面修饰对固定化酶活性和使用稳定性的影响。