Isentropic partial molal compressibilities of alcohols in propylene carbonate at 25°C

The isentropic coefficients of compressibility of the homologous series of alcohols and diols R _n CH₂OH (n=2–6), CH₃CHOHR _n (n=1–5), 1,2-propanediol, 1,3- 1,4- and 2,3-butanediol, 1,5-pentanediol, and 1,7-heptanediol dissolved in propylene carbonate have been measured at 25°C. Isentropic partial molal compressibilities and group partial molal compressibilities at infinite dilution have been evaluated. The isentropic partial molal compressibilities of these alcohols and diols have been compared with the corresponding values in water. This comparison shows that the values in propylene carbonate are higher than in water by a factor of 10 due to an increased compressibility of the solvation sheath around nonpolar groups in PC.     

The computation of the representation matrices of the generators of the unitary group

A method is presented for the efficient computation of the representation matrices of the unitary group, U(n) in the Gelfand—Tsetlin basis (corresponding to the usual spin-symmetry adapted basis for an N electron CI). The present scheme is conceptually and computationally attractive in that it is formulated directly in terms of Weyl tableaux and also that it permits simultaneous basis vector generation and matrix element evaluation. In addition the basis vectors are ordered so that subsequent restriction to the three dimensional rotation group is facilitated. An illustrative example is also presented.Taken in part from a thesis submitted to the University of London in partial fulfilment of the requirements for the degree of PhD.     

New Methods of Preparative Organic Chemistry. Transfer of Diazo Groups

When an arenesulfonyl azide, particularly p-toluenesulfonyl azide, reacts, in the presence of a base, with a compound containing an active methylene group, the two hydrogen atoms of the active methylene group are replaced by a diazo group to form a diazo compound and an arenesulfonamide. The method may be used for the synthesis of the diazo derivatives of cyclopentadienes, cyclohexadienes, 1,3-dicarbonyl, 1,3-disulfonyl, and 1,3-ketosulfonyl compounds, ketones, carbonic acid esters, and β-iminoketones. Secondary reactions can lead to azo compounds and heterocycles such as 1,2,3-triazoles, 1,2,3-thiadiazoles, and pyrazolin-4-ones. Azidinium salts react in the same way, but in this case an acidic reaction medium is necessary, a fact that is sometimes advantageous.     

Coordination behavior of N-benzoylamino acids: Synthesis and structure of mixed-ligand complexes of palladium (II) with N-benzoylamino acid dianion and diamine

Four new mixed-ligand complexes of palladium (II) with L₁ (N-benwyl-α-amino acid dianion) and L₂ [ethyldiamine (en), 2. 2′-bipyridine (Bpy) and 1.10-phenanthroline (Phen)] were synthesized. All the complexes have been characterized by elemental analyses, molar conductance, infrared and¹H NMR spectra and thermo-gravimetric analyses. Crystal structures of [Pd(Bpy)(Bzval-N, O)] and [Pd(en)(Bzphe-N, O) ·H₂O have been determined by X-ray diffraction analysis. The results indicate that in all the complexes’ ligand L₁ coordinates to palladium (II) through deprotonated amide nitrogen and carboxylic oxygen, and there are some intramolecular noncovalent interactions in the complexes. Project supported by the Natural Science Foundation of Zhejiang Province, China.     

Hydrogen bonding incis-2,3-epoxycyclooctanol

Hydrogen bonding and the electron-withdrawing or electron-donating characteristics of substituent groups that are neighboring to epoxide groups can affect the reactivity of the epoxide ring. The crystal structure ofcis-2,3-epoxycyclooctanol has been determined as a saturated eight-membered ring compound in which a hydroxyl group is attached to the C(1) atom that is adjacent to a 2,3-fused epoxy ring. The findings are that the longer epoxide C-O bond (and hence the one expected to be more readily broken) is the one farther from the hydroxyl group [1.462(1) å versus 1.447(1) å] and that the optimal hydrogen bonding is to an adjacent molecule radier than within the molecule. The shortest C-C bond is that of the epoxide group; the bond adjacent to it (on the side farther from the hydroxyl group) is the next shortest.     

Group contributions to the infinite dilution partial molar volumes of alkanes, alcohols, and glycols in polar organic solvents

Densities of binary mixtures of polar organic solvents with alcohols were measured at 25‡C. The solvents studied were N,N-dimethylformamide, dimethylsulfoxide, and formamide while alcohols were butanol, pentanol, hexanol, and 1,4-butanediol. Density measurements of hydrocarbons (from pentane to dodecane and some heptane isomers) + N,N-dimethylformamide were also performed. From these data the apparent molar volumes of alcohols and hydrocarbons as functions of concentration were calculated. The standard partial molar volumes were obtained by extrapolation to infinite dilution and are discussed in terms of group contributions.     

Compatibility Range in Polymer Mixtures. An approach using analogue calorimetry and group contribution procedures

The mixing enthalpies of blends of polymethylmethacrylate (PMMA) with poly(styrene-co-acrylonitrile) (SAN) were investigated by analogue calorimetry through the determination of the excess enthalpies of pseudobinary model mixtures corresponding to the addition of methyl-i-butyrate to a binary mixture of acetonitrile or propionitrile plus toluene or ethylbenzene. A group contribution procedure, based on UNIQUAC equation, was also devised and the polymeric mixing enthalpies were calculated from properly defined group contributions. Enthalpies for polymeric interactions were introduced into the Flory-Huggins equation and the miscibility window of PMMA-SAN mixtures was calculated. The results show a qualitative agreement with the experimental miscibility data and indicate that both the analogue calorimetry and the group contribution procedures yield correct results when acetonitrile, and not propionitrile, is chosen as the model for the polyacrylonitrile repeat unit of the copolymer. This revised version was published online in July 2006 with corrections to the Cover Date.     

Studies on the thermotropic liquid crystalline polymer. VII. Synthesis and properties of photocrosslinkable poly(ether-ester) containing cinnamic group

A series of semi-aromatic poly(ether-ester)s containing cinnamic group was prepared from 4,4′-diacrylic acid-α,ω-phenoxyalkanes with diols in the presence of diphenylchlorophosphate (DPCP) and pyridine as a catalyst and solvent. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC), optical polarizing microscopy equipped with a heating stage, and wide-angle x-ray diffraction (WAXD). All of the poly(ether-ester)s, except P3 , show nematic or smectic thermotropic liquid crystalline behaviour under optical polarizing microscopic observation. These polymers can undergo photocrosslinking reaction upon heating, as examined by IR, solubility, and DSC analysis. © 1993 John Wiley & Sons, Inc.     

Studies on the thermotropic liquid-crystalline polymer. VIII. Synthesis and properties of fully aromatic poly(ester)s and poly(amide-ester)s containing p-phenylene diacrylic group

Three series of polymers containing p-phenylene diacrylic group were prepared by direct polycondensation in the presence of diphenylchlorophosphate and pyridine. Series I was prepared from p-phenylene bis(acrylic acid) with various hydroquinones. Series II was prepared from p-phenylene bis (β-cyano acrylic acid) with methylhydroquinone. Series III was prepared from 3-methyl-4-aminophenol with p-phenylene bis(acrylic acid) or p-phenylene bis(β-cyano acrylic acid), respectively. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC), optical polarizing microscopy equipped with a heating stage, and wide-angle x-ray diffraction (WAXD). It was found that these polymers, except IIIb , exhibit thermotropic liquid-crystalline properties and show threaded or Schlieren texture under the optical polarizing microscopic observation. Furthermore, the melting temperatures of these polymers were decreased in the range of 254–354°C by incorporating with p-phenylene diacrylic group into the main chain. © 1993 John Wiley & Sons, Inc.     

Zur Reaktion eines Bis(amino)germylens mit Germaniumaziden: Abfangreaktionen von instabilen Germa-Iminen

Reaction of a Cyclic Bis(amino)germylene with Germaniumazides: Trapping-Reactions of Unstable Germa-Imines . The cyclic bis(amino)germylene 1 reacts with different germaniumazides of the type Me₂Si(NtBu)₂Ge(R)N₃ (R = Me ( 2 ), tBu ( 3 ), N(SiMe₃)₂ ( 4 ), R = N₃ ( 5 )). With the exception of 4 all azides lose dinitrogen when treated with 1 and the Ge^II center coordinates the α-nitrogen of the azide group. It seems to be reasonable to assume a transient germaimine (nitride) which is trapped by further reaction with the azide molecules 2 and 5 or by reaction with the solvent pyridine ( 3 ). In the case of 2 the germatetrazole [Me₂Si(NtBu)₂]GeN₄[Ge(NtBu)₂SiMe₂]₂ ( 6 ) is formed, the tetrazole nitrogens being exclusively substituted by germanium atoms (point symmetry of the molecule C_s(m)). When 1 is treated with 5 a tris(germa)amine [Me₂Si(NtBu)₂Ge(N₃)]₃N ( 8 ) is formed, which has an azide group attached to each Ge-atom. X-ray analysis reveals that the nine nitrogen atoms of the azide groups are coplanar with the trigonal planar Ge₃N moiety (crystallographic symmetry: 3/m). The reaction of 1 with 3 is very surprising: the pyridine in the product Me₂Si(NtBu)₂Ge(C₅H₄N)? N(H)Ge(tBu)(NtBu)₂SiMe₂ ( 7 ) is bonded via an α-carbon atom while the remaining hydrogen has added to the nitride-nitrogen. 6 crystallizes in the monoclinic system space group C2/m, a = 24.306(9), b = 10.933(6), c = 19.420(9) Å, β = 91.81(2)° and Z = 4. 7 crystallizes in the hexagonal system space group P6₃/m with a = b = 16.73(1), c = 11.006(8) Å, γ = 120° and Z = 2, and 8 crystallizes in the monoclinic system space group P2₁/n, a = 11.341(6), b = 26.086(9), c = 13.244(7) Å, β = 98. I2(2)° mit Z = 4.