辣根过氧化物酶活性膜结构及生物电催化性能

通过分子沉积法研究了在聚对苯二甲酸乙二醇酯（PET）表面及金电极表面组装辣根过氧化物酶（HRP）/聚对苯乙烯磺酸钠（PSS）多层生物活性膜，用原子力显微镜(AFM)研究了组装膜的表面形貌，并研究了组装膜的形貌、粗糙度和活性关系.应用循环伏安法（CV）研究了组装HRP膜后电极对H2O2的电化学催化还原作用.实验发现，采用亚甲基蓝（MB）溶液为介质，在H2O2浓度为0.2～5.0 mmol•L－1时，其响应电流对H2O2浓度变化基本呈线性.     

Dynamic imaging of single DNA-protein interactions using atomic force microscopy

Atomic force microscopy (AFM) imaging of static DNA-protein complexes, in air and in liquid, can be used to directly obtain quantitative and qualitative information on the structure of different complexes. For example, DNA length, the location of preferential binding sites for proteins and bending of DNA as a result of the complexation can all be measured. Recording consecutive AFM images of DNA and protein molecules under conditions that they are still able to move and interact, or dynamic AFM imaging, however, can reveal information on the dynamic aspects of the interactions between these molecules. Here, an overview is given of the technical challenges that need to be considered for successful dynamic AFM imaging studies of individual DNA-protein interactions. Necessary technical improvements to the AFM set-up and the development of new sample preparation methods are described in this paper.     

Free energy perturbation approach to the critical assessment of selective cyclooxygenase-2 inhibitors

The discovery of selective cyclooxygenase-2 (COX-2) inhibitors represents a major achievement of the efforts over the past few decades to develop therapeutic treatments for inflammation. To gain insights into designing new COX-2-selective inhibitors, we address the energetic and structural basis for the selective inhibition of COX isozymes by means of a combined computational protocol involving docking experiment, force field design for the heme prothetic group, and free energy perturbation (FEP) simulation. We consider both COX-2- and COX-1-selective inhibitors taking the V523I mutant of COX-2 to be a relevant structural model for COX-1 as confirmed by a variety of experimental and theoretical evidences. For all COX-2-selective inhibitors under consideration, we find that free energies of binding become less favorable as the receptor changes from COX-2 to COX-1, due to the weakening and/or loss of hydrogen bond and hydrophobic interactions that stabilize the inhibitors in the COX-2 active site. On the other hand, COX-1-selective oxicam inhibitors gain extra stabilization energy with the change of residue 523 from valine to isoleucine because of the formations of new hydrogen bonds in the enzyme-inhibitor complexes. The utility of the combined computational approach, as a valuable tool for in silico screening of COX-2-selective inhibitors, is further exemplified by identifying the physicochemical origins of the enantiospecific selective inhibition of COX-2 by -substituted indomethacin ethanolamide inhibitors.     

Second Dissociation Constants of 4-[N-morpholino]butanesulfonic Acid and N-[2-hydroxyethyl]piperazine-N′-4-butanesulfonic Acid from 5 to 55°C

The values of the second dissociation constant, pK ₂, for the dissociation of the NH⁺ charge center of the zwitterionic buffer compounds 4-(N-morpholino)butanesulfonic acid (MOBS), and N-(2-hydroxyethyl)piperazine-N-4-butanesulfonic acid (HEPBS) have been determined from 5 to 55°C, including, 37°C at intervals of 5°C. The electromotive-force (emf) measurements have been made utilizing hydrogen electrodes and silver–silver chloride electrodes. The value of pK ₂ for MOBS was found to be 7.702 ± 0.0005, and 8.284 ± 0.0004 for HEPBS, at 25°C, respectively. The related thermodynamic quantities, G ^o, H ^o, S ^o, and C _p ^o for the dissociation processes of MOBS and HEPBS have been derived from the temperature coefficients of pK ₂. Both the MOBS and HEPBS buffer materials are useful as primary pH standards for the control of pH 7.3 to 8.6 in the region close to that of physiological fluids.     

Extremality and the global Markov property II: The global markov property for non-FKG maximal Gibbs measures

We give a condition on a Gibbs measure for an attractive Markov specification, which assures extremality and the global Markov property. As an example of application we consider the class of attractive Markov specifications defined on a compact configuration space over a two-dimensional lattice by the interaction Hamiltonians (assumed to have a finite set of periodic ground configurations) satisfying Peierl's condition. We prove that each extremal Gibbs measure for such a specification, at sufficiently low temperature, has the global Markov property.On leave of absence from the Institute of Theoretical Physics, University of Wrocaw, Poland.     

AFM of adsorbed polyelectrolytes on cellulose I surfaces spin-coated on silicon wafers

Thin layers of cellulose I nanocrystals were spin-coated onto silicon wafers to give a flat model cellulose surface. A mild heat treatment was required to stabilize the cellulose layer. Interactions of this surface with polyelectrolyte layers and multilayers were probed by atomic force microscopy in water and dilute salt solutions. Deflection–distance curves for standard silicon nitride tips were measured for silicon, cellulose-coated silicon, and for polyelectrolytes adsorbed on the cellulose surface. Transfer of polymer to the tip was checked by running deflection–distance curves against clean silicon. Deflection–distance curves were relatively insensitive to adsorbed polyelectrolyte, but salt addition caused transfer of cationic polyelectrolyte to the tip, and swelling of the polyelectrolyte multilayers.     

Mechanochemical Complexation between Deoxycholic Acid and Salicylic Acid

A complex between deoxycholic acid (DCA) and salicylic acid (SA) was prepared by grinding and coprecipitation methods. The resultant complex was characterized by means of powder X-ray diffractometry, IR spectroscopy and thermal analysis. The stoichiometry (DCA : SA 1 : 1) of the complex obtained by grinding was identical to that obtained by coprecipitation. The powder X-ray diffraction pattern of the DCA–SA complex differed from the typical pattern of DCA–guest complexes such as DCA–camphor and DCA–phenanthrene complexes. IR spectra suggested that a different kind of hydrogen bonding was formed in the crystal of the DCA–SA complex, compared with the other DCA–guest complexes. This was in good agreement with data from the crystal structure.     

A force field study of diacetylene molecule by kinetic constant method

The potential constants of diacetylene molecule has been evaluated using kinetic constants. The other molecular constants such as the generalised vibrational mean amplitudes, shrinkage constants, Coriolis coupling constants and centrifugal distortion constants are also calculated using the vibrational frequencies and the results discussed.     

Reduced parabolic model for radical addition reactions

The transition state of addition of free radicals and atoms to multiple bonds is considered as a result of intersecting of two parabolic potential curves. One of them characterizes the stretching vibration of the attacked multiple bond, and another curve characterizes the stretching vibration of the bond formed in the transition state. The force constant of the latter is calculated by an empirical equation that correlates the force constant with the bond dissociation energy. In the framework of this model, the thermally neutral activation energy (E _e0) and the elongation of the attacked and formed bonds (r _e) in the transition state were calculated from the experimental data (activation energy (E _e) and enthalpy of reaction (H _e)) for the addition of an H atom and methyl, alkoxyl, aminyl, triethylsilyl, and peroxyl radicals to the C=C bond and the addition of H and CH₃ to the C=O and CC bonds. Analysis of the data obtained showed that E _e0 depends linearly on the |H _e| + E_e sum, i.e., E_e0/kJ mol^–1 = 14.2 + 0.61 · (E_e – H _e), and the bond elongation in the transition state for addition of the most part of radicals to ethylene and acetylene vary within (0.65–0.87)·10_–10 m. The factors affecting the activation energy of the radical addition reactions are discussed.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1542–August, 2004.     

Measurement of attachment force of microbial cells

A parallel-plate flow chamber consisting of two transparent electro-conductive glass plates was constructed. The two glass plates were set parallel to each other and connected to a potentiostat apparatus to regulate the strength of the electric field between the plates. A microbial cell suspension was flowed through the chamber. This system enabled the application of an electrostatic force to suspend charged particles, e.g. microbial cells, existing between the two plates. The time course of the cell attachment of Pseudomonas syringae pv. atropurpurea NIAES 1309 suspended in 10 mM phosphate buffer solution (pH 7.0) to the glass plate was investigated at various electric field strengths ranging from −4.2 to +4.1 V cm⁻¹. The attachment rate and the maximum number of attached cells increased linearly with the increase in the strength of the positive electric field. In contrast, the rate and the number of cells decreased linearly with the decrease in the strength of the negative electric field. These linear relations gave a specific value for the strength of the electric field (−5.9 ± 0.7 V cm⁻¹) where the electrostatic repulsion and the microbial attachment force were thought to be equal, resulting in no cell attachment. From this value, the electrostatic repulsion, i.e. the microbial attachment force, was calculated to be 5.0 × 10⁻¹¹ N cell⁻¹ for cells of average size.