正系数多项式倒数逼近的点态和整体估计

利用Ditzian-Totik光滑模对于[0,1]上定义的非角连续函数f(x)，且f(x)≠0，文中证明存在正系数多项式Pn(x)及常数C，使得|f9x)-1/Pn(x)|≤Cωψ^λ（f,n^-1/2(ψ(x) 1/√n)^1-λ)。当λ＝1时，上述结果导出已有的整体估计，而当0≤λ＜1时，得到倒数逼近一个新的点态局部估计。     

A minimal pair joining to a plus cupping Turing degree

A computably enumerable (c.e.) degree a is called nonbounding, if it bounds no minimal pair, and plus cupping, if every nonzero c.e. degree x below a is cuppable. Let NB and PC be the sets of all nonbounding and plus cupping c.e. degrees, respectively. Both NB and PC are well understood, but it has not been possible so far to distinguish between the two classes. In the present paper, we investigate the relationship between the classes NB and PC , and show that there exists a minimal pair which join to a plus cupping degree, so that PC ? NB . This gives a first known difference between NB and PC . (© 2003 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

图的度序列不等式

用代数的方法证明了有关图度序列的几个不等式，并且得到了其相应的极图。     

煤与瓦斯突出预报的模糊聚类关联分析法

首先采用模糊聚类分析对煤与瓦斯突出的样本集合进行分类，建立不同突出程度的模糊模式。然后用关联分析确定待预报样本与模式的关联程度，以此预测预报样本的煤与瓦斯突出危险程度。这种预报方法相对于模糊聚类分类后，将模式与待预报样本组成新的样本集合，再进行聚类分析，以此分类结果进行预报法。不仅可靠程度高，而且能定量描述待报样本与模式的亲和程度。     

Positive periodic solution for a two-species ratio-dependent predator-prey system with time delay and impulse

A two-species ratio-dependent predator-prey model with time delay and impulse is investigated. By using the continuation theorem of coincidence degree theory, the existence of a positive periodic solution for this system is established.     

聚丙烯微孔膜的等离子体接枝聚合改性

利用拉伸时的晶型转变致孔特性,从β晶相聚丙烯经单向或双向拉伸制得了新型聚丙烯微孔膜、用等离子体接枝聚合技术接上了亲水性聚合物如聚丙烯酸、聚丙烯腈等。研究了等离子体处理时间、单体性质对得到的亲水膜的亲水性、离子/溶质渗透性的影响。发现接枝聚丙烯酸的双向拉伸膜对Na~+、Mg~(++),尿素有较大的渗透性,并具有优良的形状稳定性。     

自体静脉移植血管的拉伸实验研究

本文考察了自体移植静脉的纵向应力应变关系。将狗股静脉移植于股动脉，在术后不同时间切取移植静脉进行纵向单轴拉伸实验。结果表明，移植静脉的应力－应变曲线比正常静脉靠近应力坐标轴并在术后逐渐向左移动。这显示了移植血管管壁组织在术后的逐渐硬化。     

Side‐chain crystallization behavior of graft copolymers consisting of an amorphous main chain and crystalline side chains. II. Poly(n‐hexyl methacrylate)‐graft‐poly(ethylene glycol)

The phase behavior and crystallization of graft copolymers consisting of poly(n‐hexyl methacrylate) (PHMA) as an amorphous main chain and poly(ethylene glycol) (PEG) as crystallizable side chains (HMAx with 15 ≤ x ≤ 73, where x represents the weight percentage of PEG) were investigated. Small‐angle X‐ray scattering profiles measured above the melting temperature of PEG suggested that a microdomain structure with segregated PHMA and PEG domains was formed in HMA40 and HMA46. This phase behavior was qualitatively described by a calculated phase diagram based on the mean‐field theory. Because of the segregation of PEG into microdomains, the crystallization temperature of the PEG side chains in HMAx was higher than that in poly(methyl acrylate)‐graft‐poly(ethylene glycol) having a similar value of x, which was considered to be in a disordered state above the melting temperature. In HMAx with x ≤ 40, PEG crystallization was strongly restricted, probably because the PEG microdomains were isolated in the PHMA matrix. As a result, the growth of PEG spherulite was not observed because the PEG crystallization occurred after vitrification of the PHMA segregated domains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 129–137, 2007     

Cationic poly(methacryl oxyethyl trimethylammonium) and its poly(ethylene glycol)‐grafted analogue as capillary coating materials in electrophoresis

Cationic polyelectrolytes were synthesized and used as semipermanent coating materials for capillaries in electrophoresis. The polyelectrolytes used were a homopolymer of poly(methacryl oxyethyl trimethylammonium chloride) (PMOTAC) and its poly(ethylene glycol) (PEG)‐grafted analogue. Two PMOTAC polyelectrolytes, with molar masses of 85,000 and 300,000 g/mol, and PEG‐grafted PMOTAC with a molar mass of 280,000 g/mol were synthesized and then characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. Attachment of the polyelectrolytes to the wall of the fused silica capillary for electrophoresis caused the electroosmotic flow (EOF) to reverse. The polyelectrolyte coatings were tested over the pH range 2–11 at different buffer ionic strengths, and the most stable and strongest anodic EOFs were obtained at acidic pH values with low ionic strength buffers. Between runs the capillary is merely rinsed for 2 or 3 min with the background electrolyte solution. With the PMOTAC coatings at pH values ≤5, the RSDs of the EOFs were less than 2.9% after 60 injections. The effects of the molar mass of the polycation and of PEGylation of PMOTAC on the interactions between the polycations and basic proteins were studied at acidic pH values. The differences in the effective electrophoretic mobilities, resolution values, and plate numbers of the proteins with the different coatings were due to the EOF, as demonstrated through calculations of reduced mobilities, relative resolution values, and relative plate numbers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2655–2663, 2007     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007