Properties of Ce–Zr–La–O nano-system with ruthenium modified surface

Structural peculiarities of Ce–Zr–La–O and Ce–Zr–La–O/Ru samples in mean of catalytic properties are compared. The samples (Ce:Zr = 1:1, La = 10÷30 mol.%, Ru = 1.5 wt.%) were obtained by sol–gel method (X-samples) and co-precipitation (P-samples). It is shown that Ce_0.45Zr_0.45La_0.1O_2−δ/Ru X-samples are characterized by high thermal stability and the highest catalytic activity in partial methane oxidation reaction. According to XRD, BET, FTIR, EPR and XPS data it is concluded that the difference in the samples catalytic activity is caused by various disposition of Ru-containing phase on the support surface. The distinction in the dimension of Ru-containing particles (3D or 2D) is conditioned by structural peculiarities of Ce_0.45Zr_0.45La_0.1O_2−δ and Ce_0.35Zr_0.35La_0.3O_2−δ P- and X-samples.     

Optimization of alkali-alkalkine earth cation separation on weak cation-exchangers

Summary The elution behavior of alkali and earth alkaline cations has been studied on a newly synthesized weak cationexchanger (WCX). Applying this stationary phase isocratic separation of these cations is possible. The dependence of retention on competing ion concentration is described via a simple model. The influence of crown ethers as well as organic eluent additives on selectivity and peak efficiency is demonstrated. With optimized separation such cations can be determined with detection limits of about 0.5 ppm using a conductivity detector without ion suppression.     

Chiral stationary phases for LC and SFC obtained by “Polymer coating”

Summary Chirally substituted Si–H-containing polysiloxanes were synthesized, which can be immobilized on small particle silica gel as well as on the smooth surfaces of fused silica capillaries. Immobilization is achieved either by crosslinking or by chemical bonding to the surfaces via silanol groups; both reactions can only be performed by addition of H₂PtCl₆, which acts as catalyst for hydrosilylation and as stoichiometric reagent for crosslinking. Chiral substituents of systematically varied chemical structure were introduced into the polysiloxanes by hydrosilylation. The mechanism of immobilization was investigated by spectroscopic methods, notably²⁹Si-NMR. Homogenous stationary-phase coatings of variable film thickness and corresponding retentivity can easily be achieved. The enantioselectivity of the phase systems was characterized in dependency on the chemical structure of the chiral selectors attached to the polysiloxane chain of the chiral stationary phases and also in terms of the functional groups introduced into the solutes by derivatisation.     

HPLC determination of urinary 2,4- and 2,6-toluendiamines as potential degradation products of polyurethane breast implants

Summary A reversed-phase HPLC method has been developed for the urinary determination of mutagenic 2,4- and 2,6-toluendiamines. These amines are degradation products of polyurethane, a material used to cover textured silicone breast implants. FMOC-Cl was used as fluorescent derivatising agent in order to obtain a limit of detection of 15 ng/ml in urine. Pre-treatment of urine samples was by liquid/liquid extraction and urine specimens of patients after surgury were analysed.     

ICP-MS for elemental speciation studies

The use of inductively coupled plasma mass spectrometry (ICP-MS) coupled with separation techniques for the purpose of elemental speciation has recently gained a lot of attention. Much of this is due to ever improving separation capabilities of Chromatographic techniques, the high sensitivity of ICP-MS, and the continuing development of better interface techniques. Additionally, there is a growing awareness of the need to monitor various species of an analyte, rather than just total analyte concentrations, due to their often varying natures. For the sake of learning from different elemental speciation approaches, this review brings together some selected types of elemental speciation which have been recently seen in literature. These include separations using various forms of liquid chromatography, such as reversed phase, reversed phase ion pairing, micelle, ion exchange, and size exclusion. Elemental speciation employing gas Chromatographie separations and supercritical fluid separations are discussed as well as elemental speciation using capillary electrophoresis.     

The effect of the structure of bonded cyanoalkyl stationary phases on their selectivity in the liquid chromatographic separation of polynuclear aromatic hydrocarbons

Summary The paper discusses the effect of the length and structure of the hydrocarbon chain connecting the nitrile group to the silica gel surface on the chromatographic properties of cyanoalkyl phases.When using non-polar and polar mobile phases, the selectivity of the cyanodecyl phases toward PAHs is higher than of the cyanopropyl phase and of hydroxylated silica gel.Polar additives to the mobile phase drastically decrease the retention on silica gel and on the cyanopropyl phase while affect the properties of cyanodecyl phases only to a considerably less degree. Newly synthesized phases with different structures of the hydrocarbon chain are compared with the commerical cyano-and ODS-phases. The retention mechanism on the cyanoalkyl phases is discussed.     

High-Performance Liquid Chromatographic Analysis of Amino Acids in Edible Seaweeds after Derivatization with Phenyl Isothiocyanate

Summary A reversed-phase high-performance liquid-chromatographic method has been used for analysis of the amino acids in edible seaweed. Sample proteins were hydrolysed with hydrochloric acid and the amino acids produced were derivatized with phenyl isothiocyanate. The resulting phenylthiocarbamyl amino acids were chromatographed on an ODS2 column with UV detection at 254 nm. The mobile phase was a mixture of 0.14 M ammonium acetate buffer, pH 6.4, containing 0.05% triethylamine (A) and 60:40 (v/v) acetonitrile–water (B), at a flow rate of 1.1 mL min^–1; the elution gradient (min:A%) was: 0:90, 8:90, 10:70, 12:70, 18:52, 20:0, 25:0, 28:90, 35:90. Method precision for the different amino acids was between 1.33 and 3.88% (relative standard deviation); detection limits were between 6.9 and 14.3 ng mL^–1. The amino acid content of the algae analysed ranged from 22.4 ± 1.9 to 138.0 ± 5.6 mg g^–1 d.w. The amino acids present at highest concentrations were glutamic acid, alanine, and phenylalanine.     

Analytical study of highly condensed non ionic surfactants. Separation on cation exchangers

Summary This study was aimed at optimizing the separation of non-ionic surfactants, resulting from the condensation of ethylene oxide with natural fatty alcohols in the C₁₆ and C₁₈ range (saturated and unsaturated), and presenting a high degree of condensation, i.e. 20 and 25 ethylene oxide units (Brij 99 and KM 25). The cation exchange stationary phase is a partially ionized silica, conditioned in different ways. We have studied the influence of the nature of cations on the separation selectivity. Cations studied included alkali metals (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺), alkaline earth metals (Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺), transition metals (Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Cu²⁺), and quaternary ammonium (NH ₄ ⁺ , NMe ₄ ⁺ ) ions as well as a proton (acetic acid). The influences of ionic strength, pH and addition of cosolvent were examined. A study of the influence of temperature on the system selectivity evidenced a strong interdependance of these two parameters. The optimized conditions [mobile phase: CH₃CN/H₂O (92/8), pH 7.4, sodium acetate 5.10^–3 M; temperature gradient between 25 and 50°C] allowed for the first time the distributions of Brij 99 and KM 25 to be obtained.     

Determination by LC of Polyphenols in Italian Red Wine

A reversed-phase liquid chromatographic method, optimised for the separation of trans-, and cis-resveratrol, catechin, epicatechin, quercetin and rutin, is reported. Separation was achieved using a C18 column and a gradient elution with acetonitrile and 5% formic acid aqueous solution. The analyses required an equilibration period of 10 min and a run time of 25 min for completion. Identification was based on retention characteristics and by relative UV spectra, obtained by photodiode array detector and were compared with commercial standards. Analyses were performed without any sample pre-treatment. Detection was carried out by UV–Vis detector at three different wavelengths. The detection limit ranged from 0.16 μgm L⁻¹ (cis-resveratrol) to 1.5 μgm L⁻¹ (+)-catechin. Investigation was extended to quantitative determination of phenol compounds in Italian red wine and to investigate the stability of the six antioxidants.     

High performance liquid chromatography assay for alanine amino transferase

Summary An improved method of alanine-amino transferase determination is proposed. The reaction is carried out with alanine and 2-oxoglutarate as substrates and analysis is by HPLC on a reversed-phase chromatographic system using a C₁₈ column and tetrabutylammonium phosphate in phosphate buffer (pH 7.0)-acetonitrile as mobile phase. The enzyme activity was determined by directly following the formation of pyruvic acid without employing any secondary reaction, which is necessary in the spectrophotometric method. The detection limit of pyruvic acid is 10 pmole l^–1 and the standard deviation for the enzymatic activity of standard solutions is 5.4%. Furthermore under the chromatographic conditions selected it is possible to detect the presence of some intermediate species.Work supported by National Research Council of Italy. Presented in part at the First International Symposium on Applications of HPLC in Enzyme Chemistry, Verona, September 1990.