Solvent-free Mukaiyama aldol reaction of O-silyl dienolates catalyzed by benzoic acid

The vinylogous aldol reaction of O-silyl dienolates deriving from 2,2-dimethyl-[1,3]-dioxin-4-ones proceeds in moderate to excellent yields in the presence of catalytic amounts of PhCOOH under solvent-free conditions. Modest to good yields can be obtained by using silica gel or 3 Å molecular sieves as heterogeneous catalysts.     

Spherical Particles of Zirconia-Titania of Hexagonal Structure from a Neutral Amine Route

Through the sol–gel process, using the so-called neutral amine route, spherical particles of 1:1 zirconia–titania were synthesized from zirconium(IV) and titanium(IV) butoxides as well as 1,12-diaminododecane as precursor species. The obtained product exhibited a hexagonal structure, as determinated by X-ray diffraction data. The obtained material was also characterized by thermogravimetry, differential scanning calorimetry, infrared spectroscopy, scanning electron microscopy, and surface area measurements. Despite the release of template molecules on heating, the spherical morphology was retained up to about 1200°C, at which the disruption of the spheres took place.     

Preparation of a Star Network PEG-based Gel Polymer Electrolyte and Its Application to Electrochromic Devices

A star network polymer with a pentaerythritol core linking four PEG-block polymeric arms was synthesized, and its corresponding gel polymer electrolyte based on lithium perchlorate and plasticizers EC/PC with the character being colorless and highly transparent has been also prepared. The polymer host was characterized and confirmed to be of a star network and an amorphous structure by FTIR, ^1H NMR and XRD studies. The polymer host hold good mechanical properties for pentaerythritol cross-linking. Maximum ionic conductivity of the prepared polymer electrolyte has reached 8.83 × 10 ^-4 S·cm^-1 at room temperature. Thermogravimetry （TG） of the polymer electrolyte showed that the thermal stability was up to at least 150 ℃. The gel polymer electrolyte was further evaluated in electrochromic devices fabricated by transparent PET-ITO and electrochromically active viologen derivative films, and its excellent performance promised the usage of the gel polymer electrolyte as ionic conductor material in electrochrornic devices.     

流变学法研究部分水解聚丙烯酰胺/Cr(III)交联反应I.浓度的影响

采用流变学法系统地考察了部分水解聚丙烯酰胺（HPAM）/Cr(III)交联体系的 反应动力学。HPAM溶液的粘性模量G”大于弹性模量G’,且其数值随时间不发生变 化,体系为粘性溶液。而HPAM/Cr(III)体系的G’和G”的数值都随时间变化,G” 在反应开始阶段大于G’,当反应进行一段时间后,G’超过G”占据主要地位,体 系成为弹性体系。交联过程可分为三个阶段：第一上升阶段,平缓上升阶段和第二 上升阶段。利用G’～ t曲线可以推测反应机理。实验发现成胶速率随反应物HPAM 和Cr(III)的浓度的增加而增加,而成胶时间缩短。在羧基浓度过量的情况下,交 联反应对Cr(III)浓度的反应级数是1。凝胶的有效弹性交联密度随聚合物浓度的增 加而增,且随凝胶反应的进行而增加。凝胶的交联点间的平均分子量随Cr(III)浓 度的增加和交联反应的进行而下降。     

酞侧基聚芳醚酮的热学性能

酞侧基聚芳醚酮的热学性能谢红卫，李滨耀（中国科学院长春应用化学研究所长春１３００２２）关键词酞侧基聚芳醚酮，ｐｖＴ行为，导热系数，定压比热容酞侧基聚芳醚酮（ＰＥＫ－Ｃ）具有较高的玻璃化转变温度，其流变加工性能和力学性能已被广泛研究［１～３］，被证明是...     

High-performance liquid chromatography of sulfonamides and quinolones on p-tert-butyl-calix[6]arene-bonded silica gel stationary phase

The high-performance liquid chromatographic behavior of some sulfonamides and quinolones was studied on a p-tert-butyl-calix[6]arene-bonded silica gel stationary phase. The effect of mobile phase variables such as methanol content, ionic strength and pH on their chromatographic behavior was investigated. The retention behavior of sulfonamides on the stationary phase was compared with that on both Zorbax C₁₈-bonded silica gel and γ-(ethylenediamino)propyltriethoxylsilane-bonded silica gel (diamino-bonded phase). The retention mechanism of sulfonamides and quinolones on the stationary phase was also discussed. The results indicate that the stationary phase behaves as a reversed-phase packing and its separation selectivity is much better than that of not only Zorbax C₁₈ phase but also diamino-bonded phase. Some sulfonamides and quinolones were separated on the stationary phase, but the separation of sulfonamides is far more successful.     

BaCe1—xRExO3—0.5x的溶胶—凝胶法合成及离子导电性

用溶胶－凝胶法合成了系列钙钛矿结构的ＢａＣｅ１－ｘＲＥｘＯ３－０．５ｘ（ＲＥ＝Ｌａ，Ｎｄ，Ｓｍ，Ｅｕ，Ｇｄ，Ｄｙ，Ｈｏ，Ｅｒ和Ｙ）复合氧化物，通过ＸＲＤ和热分析对样品结构及生成过程进行了研究．测定了不同温度下样品的交流阻抗谱，讨论了稀土离子掺杂对ＢａＣｅＯ３电性质的影响．溶胶－凝胶法比固相反应法合成温度降低了６００～８００℃，稀土掺杂使ＢａＣｅＯ３离子导电率提高了１０～４０倍．     

溶胶凝胶法制氧化铝负载铜基超细粒子催化剂的研究

采用溶胶凝胶法制氧化铝负载铜基超细粒子催化剂的制备了氧化铝负载的铜基超细粒子催化剂，用ＴＧ－ＤＴＡ，ＸＲＤ，ＢＥＴ以及ＴＥＭ等技术手段，对催化剂的物相结构，表面孔结构，粒子形貌以及催化性能等进行了研究。结果表明，利用溶胶凝胶法，可以直接帛备出高比表面积，低堆积密度的纤维状纳米级负载型Ｃｕ／Ａｌ２Ｏ３超细粒子；活性组分以远低于纳米级的微晶粒子簇状态，均匀地分散在纳米级氧化铝载体表面上，而且在低于５０     

任意多阶梯度场强毛细管凝胶电泳中谱带的迁移和展宽

在自行制备的毛细管凝胶电泳柱上，通过实验考察毛细管凝胶电泳（ＣＧＥ）中场强（Ｅ）和组分迁移率（μ）的关系，发现在一般ＣＧＥ使用的场强范围内，μ随Ｅ增大而成近似线性的增加。并讨论了产生这种现象的原因。以此为基础提供了任意多阶梯度场强毛细管凝胶电泳中组分的迁移时间和距离的计算公式，用于编制计算机程序。     

原油溶胶-凝胶等温转变过程中的流变性研究

使用RS75流变仪，采用小振幅振荡剪切方法和稳态剪切方法对含蜡原油在溶胶 -凝胶等温转变过程中的流行了研究．结果表明，等温转变成的凝胶原油的结构在 很大程度上决定于预剪切速率，非牛顿含蜡原油在结构恢复过程中表现出不可逆的 触变特性．而凝胶原油在外力作用下向溶胶状态转变的过程中，要经历从线性粘弹 性变形，到非线性粘弹性变形，再到结构屈服的过程，且高剪切应力下的溶胶原油 结构与预剪切速率无关．