带式行星─差动轮系无级变速器的研究

本文介绍了带式行星─差动轮系无级变速器的组成，详细地分析了其在调速和功率输出方面的特点，并提出了设计方法和步骤。     

Upward and downward heat and mass transfer with miniature periodically operating loop thermosyphons

Upward and downward two-phase heat and mass transfer has been considered in the present paper. The heat and mass transfer with the condenser located below the evaporator has been obtained by inserting an accumulator tank in the liquid line of a loop thermosyphon and enforcing a pressure pulsation. In previous papers these heat transfer devices have been called pulsated two phase thermosyphons (PTPT). A mini PTPT has been experimentally investigated. It has shown a stable periodic heat transfer regime weakly influenced by the position of the condenser with respect to the evaporator. In contrast a classical loop mini thermosyphon (diameter of connecting pipes 4 mm) did not achieve a stable functioning for the investigated level differences between evaporator and condenser lower than 0.37 m. The present study shows that the functioning of a PTPT device does not directly depend on the level difference or the presence of noncondensable gas. In order to obtain a natural circulation in mini or micro loops, a periodically operating heat transfer regime should therefore be considered.     

VHDL语言在EDA开发软件MAX＋PlusII之应用

介绍了EDA开发工具软件MAX PlusII的主要功能；VHDL语言在进行硬件电路描述时所具有的多层次描述系统硬件功能的能力，以及在程序编译时易出现的问题。     

DCS和FCS及其在火电厂中的应用

介绍了集散控制系统和现场总线控制系统，并对它们在火电厂中的应用做了分析。     

着装方式对服装隔热性作用规律的研究

利用姿态可调式暖体假人研究了着装姿势对服装隔热性的作用和影响规律。研究指出边界静止空气层的隔热值Ia与暖体假人的测试姿势无关，着装姿势影响服装的隔热保暖性能并从传热学角度分析了原因。     

三维内肋管内插入螺旋扭带的强化传热实验

本文分别以水和乙二醇为工质，在Ｒｅ数范围为：６００～４００００，Ｐｒ数范围为：５．５～１１０之间，对四根分别插入三种不同扭率螺旋扭带的三维内助管内的换热和流阻特性进行了实验研究。结果表明：三维内肋管内加装扭带的强化传热技术适用于低Ｒｅ数下高Ｐｒ数工质的管内对流换热强化。根据实验值得到了流阻和换热关联式。     

Parabolic Harnack inequality for divergence form second order differential operators

Old and recent results concerning Harnack inequalities for divergence form operators are reviewed. In particular, the characterization of the parabolic Harnack principle by simple geometric properties -Poincaré inequality and doubling property- is discussed at length. It is shown that these two properties suffice to apply Moser's iterative technique.     

硅一体化薄膜微电极器件及其应用

提出用发展中的硅微机械加工技术设计制作硅一体化薄膜微电极器件．这类微电化学器件具有微电极所特有的全部优点，而且由于结构上的一体化，便于器件整体的微型化和集成化．试用薄膜微电极器件电流法常温直接检测ＣＯ２气体，取得了满意的结果。设想通过器件三维构型设计的改进和完善，器件工作的长期稳定性可望进一步提高．     

Thermal conductivity of poly(vinyl chloride)/polycaprolactone blends

Thermal diffusivity, heat capacity, and density of polyvinyl chloride/polycaprolactone (PVC/PCL) blends were measured by the laser flash method, DSC, and pycnometry, respectively. The thermal conductivity of the PVC/PCL blends was determined from the results. The miscibility of the blend and crystallinity of PCL were determined by DSC. The effect of blend structure on thermal conductivity is discussed. The phase compositions of the PVC/PCL blends are of three types depending on PCL content: i.e., up to 33%, from 33 to 70%, and above 70% PCL by weight. Thermal conductivity, thermal diffusivity, and heat capacity of the PVC/PCL blends are strongly affected by the phase composition of the blend, which changes in a complicated way with PCL content. © 1994 John Wiley & Sons, Inc.     

Towards understanding the increase in strength of thermotropic polyesters with heat treatment

Thermotropic copolyester fibers of oxynaphthoate and oxybenzoate have been subjected to conditions that promote solid-state polymerization as well as annealing. The annealing process causes the crystals to perfect with a simultaneous increase in heat of fusion and melting temperature. Solid-state polymerization, a reaction rate-controlled process, causes the polymer viscosity average molecular weight to increase by chain extension from about 14,000 g/mole to more than 87,000 g/mole with a simultaneous impressive increase in tenacity from about 10 g/d (1.2 GPa) to almost 30 g/d (3.7 GPa). To understand the changes in mechanical properties, we have modeled the fiber structure as short rod-like molecules poorly bonded to a continuous matrix of parallel molecules. Lengthening of the reinforcing molecules facilitates better transfer of load from matrix to molecules, resulting in higher tenacity fibers. © 1994 John Wiley & Sons, Inc.