用于ψ＇→γ＇xcJ→γ＇γJ/ψ过程中多极分析的产生子

为了实验研究粲偶素ψ＇级联衰变过程ψ＇→γ＇xcJ→γ＇γJ/ψ,一个用于正确描述全部末态角分布的产生子是必要的．可以通过分析角分布的关联来确定这一过程的多极展开参数（或者等效的螺旋度振幅），而从中可以知道高阶电磁多极矩和相对论修正的贡献，同时可以检验ψ＇是不是ψ＇（2S）和ψ＇（1D）的混合．介绍了一个能完全描述这一过程的角分布的产生子，同时讨论了测量多极参数的测量方法．这些都可以被用在BESⅢ或者CLEOc的分析当中．     

梯度棒折射率分布系数的计算和验证

本文推导了用离子交换法制作的径向折射率梯度棒的g,h_4和h_6与材料特性相联系的计算公式。根据测定的材料参数,并用本文公式算出的g值与用成像法测得的g值相比较,其结果基本相符。     

Extreme behavior of bivariate elliptical distributions

This paper exploits a stochastic representation of bivariate elliptical distributions in order to obtain asymptotic results which are determined by the tail behavior of the generator. Under certain specified assumptions, we present the limiting distribution of componentwise maxima, the limiting upper copula, and a bivariate version of the classical peaks over threshold result.     

倾斜下降管气液两相分层流截面含气率的计算与液层高度的预测

分层流是气液两相流中常见的流动型式，分层流中液层高度是计算的基本数据，由于界面波的存在，对液层的测量和预测都很困难．Ｖｌａｃｈｏｓ提出了预测气液两相分层流液层厚度的关系式，但这一关系式并不适用于倾斜下降管气液两相流．本文提出了计算倾斜下降管气液两相分层流截面含气率的理论模型，在这种模型下得到的截面含气率和实验结果符合良好．在大量实验的基础上，考虑了倾角、管径、气液各相折算速度的影响，根据实验数据提出了预测液层厚度的关系式。     

Study on the Baryon State X Produced in the Process J／ψ→p＋X,X→p＋P

The decay process J/ψ→p X X→p P，where p,p and P are the proton,antiproton and pseudoscalar states,respectively,has been studied in terms of the angular distribution and the generalized moment analysis methods.The result shows that we can identify the spin,but cannot determine the parity of the baryon resonance state X produced in the process J/ψ→p X X→p P.     

悬臂框架结构设计方案的分析比较

通过一个设计实例，介绍了工程设计中悬臂框架结构常用的处理措施；计算表明，在悬臂端设置端柱的方法是切实可行而有效的。     

Monte Carlo方法研究低能电子束曝光沉积能分布规律

建立一个描述低能电子在多元多层介质中散射的物理模型,运用MonteCarlo方法模拟低能电子在靶体胶衬底中的复杂散射过程,在此基础上通过大量计算研究入射束能、胶层厚度、衬底材料等不同曝光条件对抗蚀剂沉积能密度分布的影响,获得沉积能分布规律:适量的低束能、薄胶层、低原子序数衬底可以使前散射电子对胶中沉积能密度分布的贡献增大、背散射电子的贡献减小,从而提高曝光分辨率. 关键词： 电子束曝光 MonteCarlo方法 低能电子散射 能量沉积     

正态分布下任意秩有限总体中的Minimax预测

对于任意秩有限总体,在二次损失下,有关文献已给出了线性可预测变量在齐次线性预测类中的唯一线性Minimax预测．本文在正态假设下,证明了这个线性Minimax预测也是线性可预测变量在一切预测类中的唯一Minimax预测．     

Property improvement of pulsed laser deposited boron carbide films by pulse shortening

Growth characteristics and surface morphology of boron carbide films fabricated by ablating a B₄C target in high vacuum with a traditional KrF excimer laser and a high brightness hybrid dye/excimer laser system emitting at the same wavelength while delivering 700 fs pulses are compared. The ultrashort pulse processing is highly effective. Energy densities between 0.25 and 2 J cm⁻² result in apparent growth rates ranging from 0.017 to 0.085 nm/pulse. Ablation with nanosecond pulses of one order of magnitude higher energy densities yields smaller growth rates, the figures increase from 0.002 to 0.016 nm/pulse within the 2-14.3 J cm⁻² fluence window. 2D thickness maps derived from variable angle spectroscopic ellipsometry reveal that, when ablating with sub-ps pulses, the spot size rather than the energy density determines both the deposition rate and the angular distribution of film material. Pulse shortening leads to significant improvement in surface morphology, as well. While droplets with number densities ranging from 1 × 10⁴ to 7 × 10⁴ mm⁻² deteriorate the surface of the films deposited by the KrF excimer laser, sub-ps pulses produce practically droplet-free films. The absence of droplets has also a beneficial effect on the stoichiometry and homogeneity of the films fabricated by ultrashort pulses.     

A simple model to extract hyperfine interaction distributions from Mössbauer spectra

The general problem of finding a distribution in hyperfine interaction parameters from experimental Mössbauer spectra is outlined. Existing methods may lack flexibility to be easily applicable to simple problems. A line shape for hyperfine parameter distributions is given, which is based on linear segments in the probability function. This method is applied in the analysis of samples containing iron in a silicate glass.