土壤中碳酸钙和有机碳测定的一种新方法

利用阿曼苏丹国的一千多个土壤样品,对土壤中碳酸钙和有机碳测定的实验方法进行了研究。发现实际碳酸钙的含量可由“亚稳态”时碳酸钙含量乘以适当的因子代替,从而大大提高了工作效率。而利用有机碳/全氮(C/N)的特殊规律,则可建立一个确定“有机碳”实验中所需土壤样品量的新方法。     

Salting coefficients for gases in seawater from scaled-particle theory

Experimental values of the salting coefficients for He, Ne, Ar, O₂, and N₂ in seawater are compared with values calculated from scaled-particle theory. The agreement is reasonably good; the average difference between calculated and observed values at 25°C is 0.007. Scaled-particle theory predicts correctly thatk _s should decrease as the temperature increases and that this effect should be most pronounced at low temperatures. However, the predicted magnitude ofdK _s/dt is only about half of that observed.     

银微电极微分电位溶出分析法研究

本文首次报道了银微电极微分电位溶出分析法。用化学刻蚀法方便地制作了银微电极，用于ＤＰＳＡ具有背景值低，分辨率好、精密度及灵敏度高，在不搅拌，仅需一定酸度而酸度而无其它介质的条件下就能测试等优点，对人工试样及自来水样分析，结果令人满意。     

An application of factorial design to the development of fused silica capillary columns

Stationary phase crosslinking conditions for fused silica capillary columns were optimized with the use of a factorial design experiment. This experimental strategy was chosen because it provided for the determination of two-factor interactions. A predictive model was developed for the desired chromatographic performance parameters as a function of the variables of the crosslinking reaction. Confirmatory experiments proved the usefulness of the mathematical model which resulted in the production of capillary columns of superior performance with significant improvements in reproducibility.     

Dynamics of the formation of two-dimensional ordered structures

The growth of ordered domains in lattice gas models, which occurs after the system is quenched from infinite temperature to a state below the critical temperatureT _c, is studied by Monte Carlo simulation. For a square lattice with repulsion between nearest and next-nearest neighbors, which in equilibrium exhibits fourfold degenerate (2×1) superstructures, the time-dependent energy E(t), domain size L(t), and structure functionS(q, t) are obtained, both for Glauber dynamics (no conservation law) and the case with conserved density (Kawasaki dynamics). At late times the energy excess and halfwidth of the structure factor decrease proportional tot ^–x, whileL(t) t ^x, where the exponent x=1/2 for Glauber dynamics and x1/3 for Kawasaki dynamics. In addition, the structure factor satisfies a scaling lawS(k,t)=t ^2xS(kt^x). The smaller exponent for the conserved density case is traced back to the excess density contained in the walls between ordered domains which must be redistributed during growth. Quenches toT>T _c, T=T_c (where we estimate dynamic critical exponents) andT=0 are also considered. In the latter case, the system becomes frozen in a glasslike domain pattern far from equilibrium when using Kawasaki dynamics. The generalization of our results to other lattices and structures also is briefly discussed.     

Comparison of combustion sources for sulfur chemiluminescence detection

Three different types of SCD combustion source have been evaluated for use in the chromatographic analysis of atmospheric sulfur compounds. The conventional FID source and the newer inverted burner source were found to be less sensitive and less stable than the flameless design. Overall, the flameless source was superior for use with HRGC-SCD.     

Multidimensional separation of isomeric species of chlorinated hydrocarbons such as PCB,PCDD, and PCDF

A multidimensional GC-system containing two capillary columns of different polarities, operated within a double oven instrument, was used for the optimized separation of complex isomeric mixtures of various types of chlorinated aromatic compounds such as PCB, PCDD, or PCDF. Electron capture was applied parallel to flame ionization detection to obtain sensitive signals of the PCB or PCDD and the n-alkane standards required for identification by Kovats indices, respectively. Electron capture detection within a valvelessly operated MDGC system forced changes in the usual instrumental set-up, the live-switching coupling piece being located within the second oven of the double oven instrument. This oven is operated isothermally to ensure optimal and interference-free detection, for stable flow conditions within the coupling piece and for the determination of the isothermal retention indices (Kovats), which are much more suitable for identification by retention than the so-called “linear” indices.     

The preparation of immobilized polysiloxane coated on packings materials for high-pressure gas chromatography

Summary In high pressure gas chromatography efficient columns can be packed by the slurry packing technique. However, polysiloxane stationary phases like OV 101 and OV 3 dissolve in the packing liquids. In order to make them suitable for slurry packing these stationary phases have to be made insoluble. This immobilization is achieved by bonding the stationary phases to the surface by means of a high temperature treatment. Successive layers are applied by recoating and are immobilized by a cross-link reaction. A range of loading percentages from 4 upto 20 by weight could be prepared in this way. On the evaluated columns compounds like butanol and dioxane elute as rather symmetrical peaks with the correct values for the retention index, indicating the absence of adsorption effects. Efficiency is good and bleeding rate is low. The columns could be successfully used in the analysis of turpentines.     

Compehensive two-dimensional gas chromatography (GC×GC) and its applicability to the characterization of complex (petrochemical) mixtures

In general, petrochemical products contain only a limited number of chemical classes of compounds (sample dimensionality). The enormous number of individual components within these classes, however, soon puts limitations upon a single chromatographic technique when it comes to adequate characterization of these products. Comprehensive two-dimensional gas chromatography (GC×GC) clearly opens the possibility of estimating the composition of hydrocarbon mixtures in a far more detailed fashion than hitherto possible. Although the emphasis of papers of GCxGC thus far almost exclusively applies to the unsurpassed peak-capacity, in the oil industry there is a need for characterization, rather than for analyzing all the individual compounds. In principle a GCxGC system can provide an almost perfect match between its intrinsic properties and the dimensionality of oil samples. To establish the applicability of GCxGC towards petrochemical analytical challenges, a commercially aavailable prototype instrument was subjected to an exhaustive characterization of a typical hydrocarbon precess stream and a fast characterization of a light gas oil. Although there are no fundamental limitations towards the quantitative aspects of a GCxGC system, this paper confines itself to qualitative results only. Quantitative aspects of GCxGC will be published in a forthcoming paper.     

Analysis and Speciation of Traces of Arsenic in Environmental,Food and Industrial Samples by Voltammetry: a Review

Voltammetric approaches for the determination of arsenic and speciation at trace levels are critically appraised in a review covering the literature from 1970 to 2002. Special attention is devoted to stripping modes and to issues related to the choice of working material and supporting electrolyte. A section is dedicated to the management of real samples and aspects of sample preparation. An extensive compilation, organized by real sample type, gathers essential experimental conditions. Potentiometric stripping analysis is introduced for sake of comparison. The coupling of voltammetric detection or preaccumulation with FIA, chromatography, capillary electrophoresis and ICP techniques is also addressed.