Determining multi‐pesticide residues in teas by dispersive solid‐phase extraction combined with speed‐regulated directly suspended droplet microextraction followed by gas chromatography–tandem mass spectrometry

In this study, an effective speed‐regulated directly suspended droplet microextraction method was developed to condense pesticide residues from teas through dispersive solid‐phase extraction prior to analysis by gas chromatography with tandem mass spectrometry. The extractant was intentionally dispersed into the sample solution in the form of globules through high‐speed agitation. This procedure increases the contact area between the binary phases and shortens the distribution equilibrium time. The fine globules reassembled by decelerating stirring speed, the extractant could be taken out for gas chromatography with tandem mass spectrometry. Recovery studies were performed under optimized extraction conditions by using matrix blanks fortified with pesticides at three concentrations (10, 50, and 100 µg/kg). Over 87% of the recoveries for the analytes in four tea matrices were acceptable given their recovery ranges of 70–120% and relative standard deviations of ≤20%. The limits of quantification of most pesticides were lower than 10 µg/kg and thus satisfied the requirements for maximum residue levels prescribed by the European Community. A total of 38 tea samples from local markets were analyzed by using the proposed method. Results showed that chlorpyrifos was the most frequently detected pesticide in teas. The method is a potential choice for the routine monitoring of pesticide residues in complex matrices.     

云蒸霞蔚——多色双喷泉实验

本实验在氨气和氯化氢气体的单喷泉实验基础上设计了集两种气体的制备、收集、验满、尾气处理、气体反应、喷泉实验与试剂回收利用于一体的连续性实验,喷泉部分涉及到的实验原理有氨气与硫酸铜溶液的配位反应、氨气与氯化钴溶液的沉淀反应、无色酚酞溶液和酸性对硝基苯酚溶液在碱性环境下的变色反应,以及氯化铁和硫氰化钾在弱酸性条件下的反应等。本实验的主要仪器装置由团队自行设计、定制,操作简便,玻璃活塞还可控制喷发顺序,实现多色多样喷泉,伴随氯化铵生成时的袅袅白烟,云蒸霞蔚,煞是壮观。另外,我们设计了多角度的互动方案,针对不同程度知识背景的受众传授知识,让参观者真切感受到化学的魅力。     

植物油中脂肪酸不同定量方法的比较分析

比较峰面积归一化法与标准曲线法两种方法分析植物油中脂肪酸百分比含量的差异.利用气相色谱-质谱联用仪(GC-MS)检测10种市售食用植物油中的8种主要脂肪酸,峰面积归一化法和标准曲线法计算脂肪酸的百分比含量.结果表明,标准曲线法与峰面积归一化法相比,肉豆蔻酸、棕榈酸、十七烷酸、硬脂酸和棕榈油酸所占的百分比升高,而油酸、亚...     

锂嵌入型化合物-氢气电池

可充电氢气电池作为一种新兴的电池体系在大规模能源储存领域显示出富有前景的电化学性能. 锂嵌入型化合物作为一大类的锂离子电池正极材料能够很好地用作可充电氢气电池的正极. 本文开发了 2种新型锂嵌入型化合物-氢气电池. 通过使用钴酸锂与磷酸铁锂2种正极材料分别与氢气负极在硫酸锂 水系电解液中进行匹配, 得到了钴酸锂-氢气电池与磷酸铁锂-氢气电池. 钴酸锂-氢气电池展现出约1.27 V 的放电电位, 约97 mA·h·g^-1的比容量及10C的高倍率; 磷酸铁锂-氢气电池展现出约0.66 V的放电电位, 约125 mA·h·g^-1的比容量以及10C的高倍率. 虽然, 钴酸锂-氢气电池和磷酸铁锂-氢气电池因为使用了未经优化的、 不稳定的锂嵌入型化合物正极材料而导致全电池容量衰减, 但这2种电池经过氢气负极的再循环利用均表现出优异的恢复能力. 本文结果证明了氢气电池的化学稳定性及其在未来长寿命电池中具有的大规模能源储存潜力.     

3D Metal–Organic Frameworks Based on Co(II) and Bithiophendicarboxylate: Synthesis,Crystal Structures,Gas Adsorption,and Magnetic Properties

Three new 3D metal-organic porous frameworks based on Co(II) and 2,2′-bithiophen-5,5′-dicarboxylate (btdc²⁻) [Co₃(btdc)₃(bpy)₂]·4DMF, 1; [Co₃(btdc)₃(pz)(dmf)₂]·4DMF·1.5H₂O, 2; [Co₃(btdc)₃(dmf)₄]∙2DMF∙2H₂O, 3 (bpy = 2,2′-bipyridyl, pz = pyrazine, dmf = N,N-dimethylformamide) were synthesized and structurally characterized. All compounds share the same trinuclear carboxylate building units {Co₃(RCOO)₆}, connected either by btdc^2– ligands (1, 3) or by both btdc^2– and pz bridging ligands (2). The permanent porosity of 1 was confirmed by N₂, O₂, CO, CO₂, CH₄ adsorption measurements at various temperatures (77 K, 273 K, 298 K), resulted in BET surface area 667 m²⋅g⁻¹ and promising gas separation performance with selectivity factors up to 35.7 for CO₂/N₂, 45.4 for CO₂/O₂, 20.8 for CO₂/CO, and 4.8 for CO₂/CH₄. The molar magnetic susceptibilities χ_p(T) were measured for 1 and 2 in the temperature range 1.77–330 K at magnetic fields up to 10 kOe. The room-temperature values of the effective magnetic moments for compounds 1 and 2 are μ_eff (300 K) ≈ 4.93 μ_B. The obtained results confirm the mainly paramagnetic nature of both compounds with some antiferromagnetic interactions at low-temperatures T < 20 K in 2 between the Co(II) cations separated by short pz linkers. Similar conclusions were also derived from the field-depending magnetization data of 1 and 2.     

Simply Applicable Method for Microplastics Determination in Environmental Samples

Microplastics (MPs) have gained significant attention in the last two decades and have been widely researched in the marine environment. There are, however, less studies on their presence, routes of entry, and impacts on the biota in the soil environment. One of the main issues in the study of MPs is a lack of standardized methods for their identification in environmental samples. Currently the most commonly used techniques are thermal desorption gas chromatography–mass spectrometry (GC–MS) methods and pyrolysis followed by GC–MS. In this study, headspace-solid phase microextraction followed by GC–MS is proposed as a simple and widely applicable method for the determination of commonly present polymer MPs (polyethylene terephthalate, polystyrene, polyvinyl chloride, polyethylene, and polypropylene) in environmental samples, for analytical laboratories with basic equipment worldwide. The proposed method is based on the identification of compounds, which are formed during the well-controlled melting process of specific coarse (1–5 mm) and fine fraction (1 mm–100 μm) MPs. The method was upgraded for the identification of individual polymer type in blends and in complex environmental matrices (soil and algae biomass). The successful application of the method in complex matrices makes it especially suitable for widescale use.     

基于ZIF-8/PAN复合薄膜的柔性丙酮气体传感器

ZIF-8是一种Zn基金属有机骨架材料, 可以吸附丙酮气体从而作为电容式丙酮传感器的气敏材料, 然而ZIF-8的传统使用形式为粉末态, 这导致其不能成为具备柔性的整体, 从而限制了传感器的柔性. 结合包埋种子和二次生长法将ZIF-8与纳米纤维结合成纤维型柔性材料, 并将其作为气敏层制备了柔性电容式丙酮气体传感器. 该传感器在9种常见挥发性有机化合物中表现出良好的选择性, 对250~2000 cm³/m³的丙酮气体具有灵敏的响应、良好的循环响应及长期稳定性. 值得注意的是该柔性传感器不仅在室温下进行传感, 而且在弯折180°的状态下对丙酮气体的响应值与不弯折(0°)状态下几乎一致, 在200次以内的180°弯折-恢复后同样表现出了传感性能的稳定, 表明了其在柔性传感器方面的潜力.     

硅烷基咪唑双三氟甲烷磺酰亚胺离子液体气相色谱固定相的性能评价

以双三氟甲烷磺酰亚胺离子([NTf₂]^-)为阴离子,合成阳离子烷基取代不同(C1、C2和C4)的硅烷基咪唑离子液体,以其为固定相制备气相色谱填充柱。 硅烷基咪唑离子液体为强极性固定相;阳离子结构影响固定相的热稳定性、极性和分离性能。 在这些离子液体固定相中,1-丁基-3-[(3-三甲氧基硅基)-丙基]咪唑双三氟甲烷磺酰亚胺([PBIM]NTf₂)对Grob试剂分离性能较好。 利用溶剂化作用参数模型,评价[PBIM]NTf₂固定相特性,研究固定相-组分分子之间相互作用机制;同时考察[PBIM]NTf₂色谱柱对不同类型化合物的分离性能。 结果表明,[PBIM]NTf₂固定相主要作用力是氢键碱性和偶极作用,对烷烃、醇、酯和胺等不同类型的样品组分表现出良好的分离能力。     

综合化学实验:方钠石型2-甲基咪唑锌的合成、表征与气体吸附*

以Zn(NO3)2·6H2O与2-甲基咪唑(2-Hmim)为起始原料,在室温下甲醇溶剂中,通过快速搅拌法方便地合成了著名的方钠石型2-甲基咪唑锌(MAF-4)MOF化合物。通过粉末X射线衍射确认了该化合物的结构,并进行了热重、红外以及系列气体吸附等温线的测试实验。该实验涵盖了合成、单晶结构和拓扑分析、稳定性和官能团分析、多孔材料吸附和分离性能分析等多种技能,总时长2 d,值得纳入综合性化学实验教学课堂。     

基于氦离子化气相色谱法测定微量氧、氮的影响因素

探讨氦离子化气相色谱法测定样品中微量氧、氮含量的影响因素。采用控制变量法,对色谱柱温度、进样流量、进样管道环境及极化电压等因素对微量氧、氮测定结果的影响进行讨论和分析。结果表明,当色谱柱温度为25~45℃时,色谱柱对氧、氮吸附量最小;当进样流量不小于70 mL/min时,微量氧、氮测定结果受外界干扰最小;当极化电压为80~160 V时,氧、氮具有最佳的响应值;初次测定样品中微量氧、氮含量时,需使进样管道表面吸附的氧、氮处于饱和状态,以便获得理想的测定结果。讨论的结果可为氦离子化气相色谱法测定相关样品中微量氧、氮含量时提供技术参考。