Fluorinated Porous Poly(spirobifluorene) Via Direct C‒H Arylation: Characterization,Porosity, and Gas Uptake

Considering intrinsic properties of conjugated polyfluorenes and special functions of porous polymers, synthesis of fluorinated porous poly(spirobifluorene) via direct C?H arylation polycondensation is explored. Owing to the contorted structure and cross-linking nature, the obtained polymer FPSBF shows permanent porosities with Brunauer–Emmett–Teller specific surface area up to 700 m² g^?1 and exhibits a narrow pore size distribution with the dominant pore size at about 0.63 nm, which is more suitable for adsorption of small gas molecules. Based on the measured gas physisorption isotherms with pressure up to 1.13 bar, the obtained polymer shows good uptaking capacities for hydrogen (1.30 wt% at 1.0 bar and 77 K) and methane (4.80 wt% 1.0 bar and 273 K). Moreover, FPSBF has significant adsorption selectivity for CH₄ against N₂ and the estimated ideal adsorption selectivity ratio is up to 30/1 at 1.0 bar and 273 K, which makes the material possess potential application in gas separation.     

气相色谱-质谱法测定水产品中15种邻苯二甲酸酯类塑化剂的残留量

建立了同时测定水产品中15种邻苯二甲酸酯类塑化剂残留的气相色谱-质谱(GC-MS)分析方法。样品经二氯甲烷-正己烷(1∶1)混合溶液超声萃取,中性氧化铝玻璃层析柱净化,用正己烷、二氯甲烷-正己烷(1∶9)混合液、乙酸乙酯-正己烷(1∶4)混合液和乙酸乙酯依次洗脱目标物,洗脱液经浓缩后正己烷定容,气相色谱-质谱测定。结果显示,15种邻苯二甲酸酯的线性范围为0.05～1.0 mg/L,相关系数(r)不小于0.999 1,检出限(LOD,S/N=3)为0.04～1.18μg/kg,定量下限(LOQ,S/N=10)为0.20～4.00μg/kg,不同水产品样品中添加2、50、200μg/kg的15种PAEs,平均加标回收率为81%～123%,相对标准偏差(RSDs,n=3)均小于15%。该方法稳定、可靠、操作简便,适用于鱼肉等水产品中多种PAEs的同时检测与确证。     

顶空气相色谱法测定瑞替加滨原料药中残留溶剂

建立了测定瑞替加滨原料药中残留溶剂乙醇、正己烷、四氢呋喃、三乙胺的顶空气相色谱方法。采用氢火焰离子化检测器,以N,N-二甲基甲酰胺为样品溶剂,通过对色谱条件优化,建立了以DB-624为分析柱、110℃为平衡温度、15 min为平衡时间的残留溶剂测定方法。经方法学验证,上述4种溶剂的方法检出限依次为0.007 5%、0.000 48%、0.002 4%、0.01%;峰面积的相对标准偏差均小于2.1%;平均回收率为100%～102%;4种溶剂的线性系数均大于0.995。结果表明,该方法的检测灵敏度高、精密度好、准确度高、线性关系良好,能够满足对瑞替加滨质量的控制要求。将该方法应用于3批瑞替加滨原料药的残留溶剂检测,均只检出乙醇和正己烷,且乙醇和正己烷的最高残留量分别为0.149%和0.022%,均未超出限量规定。     

醋酸酐衍生-气相色谱-质谱联用测定葡萄酒中的糖醇

建立了先采用醋酸酐衍生然后用气相色谱-质谱联用仪检测葡萄酒中糖醇的方法。在葡萄酒中加入吡啶涡旋混合均匀,以5000 r/min (4℃)离心10 min。取上清液过有机滤膜,加入吡啶、醋酸酐衍生。加无水硫酸钠吸水后,经DB-5MS毛细管气相色谱柱分离,在选择离子监测(SIM)模式下进行检测。各目标物在0.019~1.25 mg/L (乳糖醇在0.039~2.50 mg/L)范围内线性关系良好,相关系数(r²)均大于0.99。赤藓糖醇、木糖醇、甘露糖醇、山梨糖醇、半乳糖醇和乳糖醇的定量限(信噪比(S/N)=10)分别为0.17、0.29、0.43、0.46、0.47和2.88 mg/L;检出限(S/N=3)分别为0.05、0.08、0.13、0.14、0.14和1.38 mg/L。在40 mg/L和80 mg/L加标水平下,6种糖醇在葡萄酒基质中的回收率为80.15%~108.75%,相对标准偏差(RSD)为2.16%~6.97%。该方法的灵敏度、准确度和精密度均符合相关的技术要求,适合于葡萄酒中糖醇含量的快速检测。     

气相色谱法测定树脂工艺品中的半挥发性有机物残留

建立了树脂工艺品中半挥发性有机物(SVOCs)的超声萃取–气相色谱检测方法。对超声萃取条件进行了研究,优化了气相色谱参数。结果表明,样品用三氯甲烷在60℃下超声萃取40 min,选择HP–5色谱柱时,气相色谱(FID)测定半挥发物总量时可获得良好的灵敏度和准确的定量结果。方法的相对标准偏差小于5%(n=6),检测限为2 mg/kg。4个含量水平样品的6个实验室3次平行测定结果表明,实验室内测定结果的相对标准偏差为1.61%~2.94%,实验室间测定结果的相对标准偏差为5.96%~8.35%。     

惰气熔融-红外光谱法测定镨钕镝中的氧

研究了惰性气体-红外光谱法测定镨钕镝合金中的氧,采用石墨套坩埚和高纯镍篮,在4500W的分析功率下,对0.1g实际样品进行分析,取得了满意的效果。实验结果表明,样品释放完全,测定结果相对标准偏差(RSD,n=5)为1.9%,以GSBH40104—1996标准样品(ω(O)/%=0.00943)进行加标回收实验,回收率测量结果为95%～108%。     

反气相色谱法测定有机溶剂型木质素的溶解度参数

采用反气相色谱法(IGC),于333.15～373.15 K温度范围内测定了有机溶剂型木质素的溶解度参数(δ2)及相关指标。以正辛烷(n-C8)、正癸烷(n-C10)、正十二烷(n-C12)和正十四烷(n-C14)为探针溶剂,计算了探针溶剂的特性保留体积(V0g)、摩尔吸收焓(ΔHs1)、无限稀释摩尔混合焓(ΔH∞1)、摩尔蒸发焓(ΔHv)、无限稀释活度系数(Ω∞1)以及探针溶剂与有机溶剂型木质素的Flory-Huggins相互作用参数(χ∞12)。结果表明,上述4种探针溶剂在测定的温度范围内均为有机溶剂型木质素的不良溶液;在同一温度下,参数χ∞12随着探针溶剂碳数的增加而降低。测得的有机溶剂型木质素的δ2为19.03 (J\5cm-3)1/2。     

天然维生素E制品中杂质的分离与鉴定

利用高效液相色谱、气相色谱-质谱联用与高分辨质谱对天然维生素E制品中的杂质进行了分离分析与结构鉴定。采用正相高效液相色谱法分离天然维生素E的4种异构体及2种杂质,并对杂质馏分进行富集纯化。将气相色谱-质谱联用与高分辨质谱检测相结合,用于获得杂质的结构信息。通过比较杂质精确相对分子质量和解析质谱碎片离子,推断杂质为芝麻素及其同分异构体表芝麻素。经与芝麻素对照品保留时间及碎片离子数据比对,确证了对杂质结构的推断。所建立的杂质鉴定方法快捷、有效,可应用于天然维生素E制品的食品安全控制。     

气相色谱-串联质谱法测定食用油中两种非邻苯二甲酸酯类增塑剂

建立了气相色谱-串联质谱同时测定食用油中对苯二甲酸二（2-乙基己基）酯和偏苯三甲酸三（2-乙基己基）酯两种非邻苯二甲酸酯类增塑剂的方法。样品采用乙腈提取,于-20℃冷冻除脂净化,用气相色谱-串联质谱选择反应监测模式测定。两种化合物的检出限为0.03 mg/kg,定量限为0.1 mg/kg,线性范围为0.1~10 mg/kg。3个添加水平（0.1、0.3和1.0 mg/kg）下的回收率为81.04%~108.31%,相对标准偏差为0.70%~9.91%。该方法简便、准确,适用于食用油中对苯二甲酸二（2-乙基己基）酯和偏苯三甲酸三（2-乙基己基）酯的检测。     

HFIP-Functionalized Co3O4 Micro-Nano-Octahedra/rGO as a Double-Layer Sensing Material for Chemical Warfare Agents

Semiconductor metal oxides (SMO)-based gas-sensing materials suffer from insufficient detection of a specific target gas. Reliable selectivity, high sensitivity, and rapid response–recovery times under various working conditions are the main requirements for optimal gas sensors. Chemical warfare agents (CWA) such as sarin are fatal inhibitors of acetylcholinesterase in the nerve system. So, sensing materials with high sensitivity and selectivity toward CWA are urgently needed. Herein, micro-nano octahedral Co₃O₄ functionalized with hexafluoroisopropanol (HFIP) were deposited on a layer of reduced graphene oxide (rGO) as a double-layer sensing materials. The Co₃O₄ micro-nano octahedra were synthesized by direct growth from electrospun fiber templates calcined in ambient air. The double-layer rGO/Co₃O₄-HFIP sensing materials presented high selectivity toward DMMP (sarin agent simulant, dimethyl methyl phosphonate) versus rGO/Co₃O₄ and Co₃O₄ sensors after the exposure to various gases owing to hydrogen bonding between the DMMP molecules and Co₃O₄-HFIP. The rGO/Co₃O₄-HFIP sensors showed high stability with a response signal around 11.8 toward 0.5 ppm DMMP at 125 °C, and more than 75 % of the initial response was maintained under a saturated humid environment (85 % relative humidity). These results prove that these double-layer inorganic–organic composite sensing materials are excellent candidates to serve as optimal gas-sensing materials.