三峡库区移民区曲溪小流域能源利用分析

通过分析小流域的能源资源现状、不同时期能源需求变化对生态环境的影响、秸秆利用对坡耕地生产力的影响、经济发展对生物质能需求影响、节能及替代能源对生物质能需求的影响等,提出了解决能源问题,促进生态环境持续改善的对策.     

提高微晶硅薄膜太阳电池效率的研究

采用甚高频等离子体增强化学气相沉积技术制备了系列微晶硅薄膜太阳电池，指出了气体总流量和背反射电极的类型对电池性能参数的影响.电池的I-V测试结果表明：随反应气体总流量的增加，对应电池的短路电流密度、开路电压和填充因子都有很大程度的提高，结果使得电池的光电转换效率得以提高.另外，ZnO/Ag/Al背反射电极能明显提高电池的短路电流密度，进而也提高了电池的光电转换效率.对气体总流量和背反射电极类型影响电池效率的原因进行了分析. 关键词： 微晶硅薄膜太阳电池 气体流量 ZnO/Ag/Al背反射电极     

Development of a Simulation Model for Solid Objects Suspended in a Fluctuating Fluid

We introduce a new scheme for the future application of Real-coded Lattice Gas (RLG) to the numerical simulation of suspended solid objects in a fluctuating fluid environment. The reproduction of Brownian motion for a single solid object is verified through the Gaussian distribution of its displacements. The effectiveness of the solid–solid interaction model is also confirmed in an N-body simulation.     

量子点器件的三端电测量研究

利用三端电测量方法，研究了调制掺杂二维电子气结构的量子点器件输运特性.报道了可分别测量二维电子气电阻和量子点隧穿电阻的实验方法.实验结果表明：量子点的横向耦合控制了量子点器件在小偏压下的电输运特性. 关键词： 自组装量子点 二维电子气 量子隧穿 肖特基接触     

The Gas Sensitivity of Polypyrrole Film Fabricated by in Situ Polymerization

1 Results Polypyrrole (PPy) is a typical conducting polymer with high conductivity and good stability,and has been widely used for detection of gases including ammonia and nitroxide[1].However the reversiblity and selectivity of the response to these gases are always not satisfying.In the paper,conductive PPy film was deposited on the interdigital electrode modified by one bilayer of poly(diallyldimethylammonium chloride) and poly(sodium styrenesulfonate),by in-situ polymerization with FeCl3 as oxidizin...     

曲轴箱窜气量检测仪的研制

介绍了车用压差式气体流量传感器的结构设计和电测电路，指出了传感器的使用范围，由实验测出了特性曲线．该仪器可检测车用发动机曲轴箱窜气量，适用于发动机不解体故障诊断．     

Liquid–gas critical phenomena under confinement: small-angle neutron scattering studies of CO2 in aerogel

Small angle neutron scattering (SANS) is a well-established technique for investigating the behavior of confined binary liquid solutions, as it can probe the correlation length and susceptibility in pores on length scales 1 – 100 nm. We applied SANS to explore the influence of confinement on critical behavior of an individual fluid carbon dioxide (CO₂) in a highly porous aerogel. The results demonstrate that quenched disorder induced by aerogel significantly depresses density fluctuations. Despite the negligible volume occupied by aerogel (< 4%), the macroscopic phase separation of confined CO₂ into coexisting liquid and gaseous phases is suppressed and below the critical temperature of the bulk fluid frozen methastable microdomains are formed. Experimental data show that critical adsorption is as important as the effect of confinement in defining the behavior of confined fluids.     

毛细管气相色谱法测定中药中有机氯农药残留量

建立了江西省两种中药中有机氯农药残留量的气相色谱分析方法。样品以丙酮提取,在NaCl存在下,以正已烷进行液—液分配,提取液用H2SO4净化,采用DB—1701毛细管柱,GC—ECD检测有机氯农药残留量。最低检测限为1.0×10-3-5.0×10-3mg/kg,添加回收率为85.7%-115.2%,应用于实际样品中有机氯农药残留量的检测,获得了较为满意结果。     

Large scale petroleum reservoir simulation and parallel preconditioning algorithms research

Solving large scale linear systems efficiently plays an important role in a petroleum reservoir simulator, and the key part is how to choose an effective parallel preconditioner. Properly choosing a good preconditioner has been beyond the pure algebraic field. An integrated preconditioner should include such components as physical background, characteristics of PDE mathematical model, nonlinear solving method, linear     

Improvement of gas meter performance using polymer materials

The measuring elements of both dry‐ and wet‐type gas meters are composed of a diaphragm and rotary drum. In this article an explanation on the principle of measuring and the structure of the gas meter for each of these two types was discussed. Such applications were made as follows: synthetic rubber was used for the measuring diaphragm, engineering plastic was employed instead of metal for the measuring drum, and poly(butylene terephthalate) (PBT) was used for the casing, respectively. As a result, an improvement in the gas resistance performance and productivity, which led to a lighter weight, more compactness and a lower cost of productions was achieved. Also the influence of the solubility of the measured gas to the plastic on the measured valve was discussed. Copyright © 2003 John Wiley & Sons, Ltd.