Structural,optical and photocatalytic properties of (Mg,Al)-codoped ZnO powders prepared by sol–gel method

Structural and optical properties of 1 at % Al-doped Zn_1−xMg_xO (x=0–8%) powders prepared by sol–gel method were systematically investigated by means of X-ray diffraction, scanning electron microscopy, ultraviolet–visible absorbance measurement, photoluminescence and Raman scattering spectra. All the powders retained the hexagonal wurtzite structure of ZnO. The band gap and near band emission energies determined from absorbance and photoluminescence spectra increased linearly with increasing Mg content, respectively, which implied that the Mg worked effectively on ZnO band gap engineering, irrespective of Al codoping. However, according to the PL and Raman scattering studies, for the sample of x=8%, the Al doping efficiency was decreased by higher Mg codoping. On the other hand, the effect of Mg codoping on photocatalytic degradation of methylene orange was explored experimentally. The substitution of Mg ions at Zn sites shifted the conduction band toward higher energies and then enhanced the photocatalytic activity, while the incorporation of interstitial Mg ions and decreased Al doping efficiency for higher Mg doping sample (x=8%) reduced the photocatalytic activity.     

Molecules relevant for organic photovoltaics: a range-separated density functional study

Accurate determination of both fundamental and optical gap is necessary for designing molecules relevant for organic photovoltaics. Here, we study how range-separated density functionals reproduce frontier orbital energies, HOMO (highest occupied molecular orbital)–LUMO (lowest unoccupied molecular orbital) gaps, and optical gaps for molecules relevant for organic photovoltaics. In this study, we consider 12 different range-separated density functional for computing HOMO energy, HOMO–LUMO gap, and optical gap which are compared with available experimental and reported GW values. We found that the reproduction of desired photovoltaic properties primarily depend on range separation parameter. Moreover, the tested functionals are comparable with OT-BNL functional.     

Thermal stability,morphology and electronic band gap of Zn(NCN)

The thermal behavior of zinc carbodiimide Zn(NCN) was examined in the temperature range between 200 and 1100 °C in Ar atmosphere. The material starts to partially decompose at about 800 °C. Heat treatment at temperatures beyond 800 °C results in the formation of the byproducts nitrogen-containing bamboo-like multiwall carbon-nanotubes of 20–50 nm in diameter due to a partial decomposition of Zn(NCN) into dicyan (CN)₂, zinc and nitrogen gas followed by the polymerization of the former product to paracyanogen (CN)_n. At 1100 °C, the yield of the residual carbodiimide depends on the dwelling time and the initial amount of powder used for pyrolysis. One hour dwelling at 1100 °C yields ∼50% of the Zn(NCN) separated as pure material. Temperature-induced change in the band structure, namely indirect-to-direct band gap transition, is registered when compared the Zn(NCN) at room temperature with the residual material annealed at 1100 °C. The transition from indirect (E_g = 4.32 eV) to direct band gap (E_g = 4.93 eV) is due to the thermal annealing process which results in healing of crystal defects.     

Quantum chemical study of IrFn (n = 1–7) clusters: An investigation of superhalogen properties

In present investigation, the interactions of iridium (Ir) atom with fluorine (F) atoms have been studied using the density functional theory. Up to seven F atoms were able to bind to a single Ir atom which resulted in increase of electron affinities successively, reaching a peak value of 7.85 eV for IrF₇. The stability and reactivity of these clusters were analyzed by calculating highest occupied molecular orbital (HOMO)–LUMO gaps, molecular orbitals and binding energies of these clusters. The unusual properties of these clusters are due to the involvement of inner shell 5d‐electrons, which not only allows IrF_n clusters to belong to the class of superhalogens but also shows that its valence can exceed the nominal value of 2. © 2012 Wiley Periodicals, Inc.     

The optimal cell gap determination of a liquid crystal wavefront corrector from a single photoelectric measurement

It has been a crucial technique to improve the dynamic response characteristics of a liquid crystal wavefront corrector (LCWFC) with optimal cell gap since the LCWFC needs at least 2π (or π) phase modulation in adaptive optics systems (AOSs). We have given a complete process for obtaining the optimal cell gap accurately from a single photoelectric measurement, which can be conducted with a liquid crystal (LC) cell of any known thickness. This method has been analysed theoretically and confirmed experimentally by using a wedge-shaped cell; the experimental results match very well with the theoretical analysis. The response time of an optimal gap cell can be a novel evaluation method of response performance of LC materials.     

Copper-containing dendromesogens: the influence of the metal on the mesomorphism

The synthesis and liquid crystalline behaviour of the first and second generations of a dendrimeric structure based on poly(propyleneimine)(DAB-dendr(NH₂)_x) are reported. 4-(4-n-Alkoxybenzoyloxy)salicylaldehydes are used as mesogenic moieties attached at the peripheral amino groups of the dendrimers giving rise to dendromesogens with four and eight mesogenic branches. From these dendromesogens, considered as organic ligands, were prepared six metal-containing dendrimers which incorporate two or four copper atoms in their structures. All the dendrimeric ligands and three of the metal-containing dendrimers exhibit liquid crystalline properties which were studied by optical microscopy, DSC, X-ray diffraction and EPR spectroscopy.     

Gap formulas for closed linear relations

A classical formula for the gap between two densely defined closed operators in a Hilbert space is extended to the case of linear relations. Copyright © 2014 John Wiley & Sons, Ltd.     

The first representative of a new class of charge transfer complexes in o-quinone series for organic semiconductors

The first representative of a new class of charge transfer complexes for organic semiconductors was synthesized. The reaction of p-nitroaniline (PNA) with [1,10]-phenanthroline-5,6-dione (PD) results in the formation of a stable molecular charge transfer (CT) complex PNA₃-PD₂ in a ratio of 3:2. The structure of the molecular CT complex PNA₃-PD₂ was established by X-ray diffraction studies. Using the density functional theory method, it is shown that several types of intermolecular interactions are realized in the complex: between the PNA amino group and the nitro group of another PNA molecule, carbonyl groups, and PD nitrogen atoms. Complex PNA₃-PD₂ is stable only in solid form. The diffuse reflectance UV–vis spectrum of PNA₃-PD₂ crystal powder is characterized by the intense weakly structured long-wavelength absorption band up to 650 nm. Quantum chemical calculations of the electronic structure have shown that the complex PNA₃-PD₂ is a straight-band semiconductor with a band gap of 2.11 eV.     

Enhanced Static Modulated Fourier Transform Spectrometer for Fast Approximation in Field Application

We discuss the data sampling frequency, the spectral resolution, and the limit for non-aliasing in the static modulated Fourier transform spectrometer based on a modified Sagnac interferometer. The measurement was performed in a very short 4 ms, which is applicable for real time field operation. The improved spectrometer characteristics were used to investigate the spectral properties of an InGaAs light emitting diode. In addition, The measured spectral peak was shifted from 6420 cm⁻¹ to 6365 cm⁻¹, as the temperature increased from 25 °C to 40 °C, when the operating current is fixed to be 0.55 A. As the applied current increased from 0.30 A to 0.55 A at room temperature, the spectral width was broadened from 316 cm⁻¹ to 384 cm⁻¹. Compared to the conventional Fourier transform spectrometer, the measured spectral width by the static modulated Fourier transform spectrometer showed a deviation less than 10%, and the spectral peak shift according to the temperature rise showed a difference within 2%.     

Theoretical investigation of the interaction between the metal phthalocyanine [MPc]a(M = Sc,Ti, and V; a = –1, 0, and +1) complexes and formaldehyde

Formaldehyde (FA, CH₂O) is one of the toxic volatile organic compounds that cause harmful effects on the human body. In this work, the interaction of FA gas with metal phthalocyanine (MPc) molecules was studied by employing density functional theory calculations. A variety of [MPc]^a (M = Sc, Ti, and V; a = –1, 0, and +1) complexes were studied, and the electronic properties, interaction energies, and charge transfer properties of all of the studied molecules were systematically discussed. Among the studied complexes, the Sc and Ti phthalocyanines were more reactive toward the adsorption of FA gas. Moreover, it was revealed that the interaction of the [ScPc]⁺¹ and [TiPc]⁰ complexes with the CH₂O molecule was stronger, in which the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy gap of 46% and 36% decreased after FA adsorption. The results indicated that the MPc-based materials may be a promising candidate for the detection of FA gas.