多孔结构对Vero White型光敏树脂力学性能的影响

多孔结构设计是影响使用性能的主要因素之一,优化多孔结构是减少质量的重要途径.利用静力学仿真分析不同板材内部结构力学性能的变化规律及特点.采用以色列Objet Eden250光固化设备,对Vero White型光敏树脂进行不同结构光固化成型,利用AG-Xplus电子万能试验机测试了试样抗压性能,并与仿真结果对比.研究结果表明,多孔结构的抗压强度随着孔隙率的升高而降低,不同结构的多孔结构的抗压强度的变化范围在15～70 MPa.蜂窝状结构的性能优于六面体结构,六面体结构优于八面体结构.研究结果与理论结果基本一致,为多孔结构在增材制造的成功应用提供了理论依据和实验依据.     

An investigation of the accelerated thermal degradation of different epoxy resin composites using X-ray microcomputed tomography and optical coherence tomography

Epoxy resin composites reinforced with hollow glass microspheres, microlight microspheres, 3D parabeam glass, and E-Glass individually were subjected to accelerated thermal degradation conditions. X-ray microcomputed tomography (XμCT) was used to evaluate density changes, reinforcement filler damage, homogeneity, cracks and microcracks in the bulk of the different epoxy resin composites. XμCT 3D images, 2D reconstructed images and voids calculations revealed microspheres damage, filler distributions and showed cracks in all composites with different shapes and volume in response to the thermal degradation conditions. In addition, expansion of air bubbles/voids was observed and recorded in the microsphere and microlight epoxy composite samples. In a complementary way, optical coherence tomography (OCT) was used as a novel optical characterisation technique to study structural changes of the surface and near-surface regions of the composites, uncovering signs of surface shrinkage caused by the thermal treatment. Thus, combining XμCT and OCT proved useful in examining epoxy resin composites' structure, filler-resin interface and surface characteristics.     

CH-alkylation of furan derivatives under photoinduced Pd catalysis

A new method for selective C(5)–H alkylation of 2-substituted furans with tertiary and secondary alkyl bromides under photoinduced by visible light (∼460 nm) palladium catalysis has been developed. The method is relied on the use of available Pd(PPh₃)₄ catalyst under mild conditions (30 ± 5 °C, K₂CO₃ as base), tolerates to various functional groups in furanic substrates and provides from good to excellent yields of alkylated products.     

载溴树脂溴化酚类的研究

用简便方法制备得载溴树脂并用于酚类的溴化,当采用不同摩尔比的载溴树脂时,有选择地得到一溴、二溴及三溴代物,并有较高的产率,同时该树脂具有良好的稳定性。     

新型L-羟脯氨酸聚合物键合手性固定相的制备及对手性化合物的拆分

以单分散亲水性交联聚甲基丙烯酸环氧丙酯-甲基丙烯酸乙二醇双酯(PGMA/EDMA)树脂为载体,制备新型L-羟脯氨酸聚合物键合高效手性配体交换固定相。该固定相在配体交换分离模式下,以0.2mol/LNaAc和0.1mmol/LCu(Ac)2水溶液(pH5.2)为流动相,柱温为30℃～50℃,对衍生和非衍生的D,L-氨基酸和α-羟基酸等9种手性化合物进行了高效液相色谱拆分。详细考察了流动相pH值、温度、流速和进样量对手性分离的影响,选择了合适的色谱分离条件。结果表明,所拆分的9种手性化合物,有5种手性化合物能得到基线分离,最好的分离因子α=2.32。     

氟金云母填充环氧树脂复合材料研究

分别用标准氟金去母和改性氟金云母填充环氧树脂，制得了氟金云母／环氧树脂复合材料，对其力学性能进行了测试，并用扫描电子显微镜对其微观组织和形态进行了观察分析，研究了氟金云母的性质，质量分数同该复合材料力学性能之间的关系，结果表明：改性氟金云母对环氧树脂具有较好的增强作用，当其质量分数为10％时，复合材料的弯曲强度可提高50％，弹性模量可提高100％，标准氟金云母虽然可提高弹性模量，但却使弯曲强度下降。     

炭黑／结晶性含氟树脂合金在自控温加热电缆中应用

选择了结晶性含氟树脂添加改性剂为树脂基体，与炭黑制居复合导电体系。通过这个对体系不同条件下ＰＴＣ特性的研究，对其配方与加工工艺进行优化。并利用扫描电镜，Ｘ射线衍射，ＤＳＣ等分析测试手段，对体系的各种开矿结构进行了研究，阐明了该导电复合体系的形态结构与性能的关系。     

含醚键离子交换树脂对Cu2+和Pb2+的吸附性能研究

研究了含醚键的离子交换树脂对重金属离子Cu2 和Pb2 的吸附性能,分析了该离子交换树脂的吸附动力学,对吸附时间、Cu2 离子和Pb2 离子浓度及pH值等因素对该树脂吸附性能的影响作了系统考察,并对该离子交换树脂的吸附机理及再生方法进行了初步探讨.结果表明,在温度为25℃、pH值为4.5的条件下,该离子交换树脂对Cu2 和Pb2 离子的吸附容量可达到2.3 mol/kg左右,去除率均可达到97.5%以上,并适合处理含低浓度Cu2 离子或Pb2 离子的废水.吸附了重金属离子的离子交换树脂可用5%～10%的盐酸再生并回收重金属离子.图2,表4,参10.     

Thermally stimulated depolarization current of novolac resin

A novolac phenol-formaldehyde resin was investigated via the thermally stimulated depolarization current, using integral and partial measurements in the temperature range from 137 to 270 K. Tow broadened peaks, assigned as Β₁, and Β₂, appeared at about 160 and 190 K. The influence of water and ¯M_n was investigated. The activation energy E_a vs. T relationship was analysed, and a search was made for compensation phenomena. The distribution of the relaxing dipolesN vs. E_a was approximated. Three different relaxation ranges were distinguished. All the motions were attributed to the rotation of the phenyl rings. The differences found are due to the heterogeneity in the resin. Contamination with water increases the polarizability, decreases the structure differences and relieves the motions in the resin. A resin with a smaller ¯M_n exhibits a higher polarizability and a decreases in structure variety.     

4-Amino-l,2,4-triazole Resin-supported Palladium Complex as Phosphine-free Catalyst for Suzuki Reaction in Aqueous Phase

1 Introduction The Suzuki cross-coupling reaction is a powerful and versatile method for the generation of unsymme-trical biaryls from arylboronic acids and aryl halides in a single step~([1-3]).However,the reaction is usually performed in the presence of Pd catalyst along with phosphine ligand,which sometimes creates practical problems because organophosphines tend to be expensive,poisonous,and air sensitive.Recently,phosphine-free ligands,such as nitrogen or sulfur-containing ligands~([4-6]) and N-heterocyclic car-benes~([7-12]) have been applied in Suzuki reaction effectively.