The effect of construction material, contents and room geometry on the sound field in dwellings at low frequencies

An experimentally validated finite element method is used to model the sound level in rooms at low frequencies. It is demonstrated that the dimensions of rectangular rooms strongly influence the sound pressure level difference. Additional factors were investigated which are not normally considered in the frequency range where diffuse sound field conditions can be assumed. Three effects were investigated: room damping due to wall vibrations, furniture, the effect of small deviations from simple rectangular shapes. It is confirmed by field measurements that the vibrations of masonry walls and floors introduce less damping than surfaces of lightweight construction. Assigning to the FE model a damping equivalent to a surface absorption of 0.02 reproduces the effect of walls of heavyweight construction. Damping equivalent to a surface absorption of 0.15 reproduces the effects of plastered timber-frame walls, floors and ceilings. The work was briefly extended to a room pair built with heavyweight and lightweight material of construction. The modification of the shape of the room frequency response highlights well the effect of material of construction. In-situ and laboratory measurements show that furniture has little effect on steady-state room response below 100 Hz. Modelling a wall recess smaller than 0.5 m improved the agreement between prediction and measurements but the assumption of a simple rectangular room remains appropriate.     

FeCoB-SiO2磁性纳米颗粒膜的微波电磁特性

采用交替沉积磁控溅射工艺制备了超薄多层的FeCoB SiO2 磁性纳米颗粒膜 .利用x射线衍射仪、扫描探针显微镜、透射电子显微镜分析了薄膜的微结构和形貌特征 .采用振动样品磁强计、四探针法、微波矢量分析仪及谐振腔法测量薄膜试样的磁电性能和微波复磁导率 .重点对SiO2 介质相含量、薄膜微结构对电磁性能产生重要影响的机理做了分析和探讨 .结果表明 :这类FeCoB SiO2 磁性纳米颗粒膜具有良好的软磁性能和高频电磁性能 ,2GHz时的磁导率 μ′高于 70 ,可以应用于高频微磁器件或微波吸收材料的设计     

光强一定时饱和光电流随入射光频率的变化关系辨析

对光电效应实验中饱和光电流随入射光频率变化关系的几种谬误进行了辨析，给出了光强一定时饱和光电流随入射光频率变化的正确规律并作了解释。     

关于非平行板电容器电容计算的讨论

用串联方法计算非平行板电容器的电容，简便地得到与其他方法相同的结果。     

燃煤烟气中As、Se、Pb的形态分布及S、Cl元素对其形态分布的影响

基于化学热力学平衡分析方法，计算分析了燃煤烟气中重金属As、Se、Pb的形态分布规律，研究了S、Cl等元素对As、Se、Pb的形态分布规律的影响。结果表明，氧化性气氛下，As以As₂O₅、As₄O₆、AsO等氧化物的形式存在；Se主要以SeO₂形式存在；Pb在1000 K以下主要是固态PbSO₄，1200 K以上为气态PbO。还原性气氛下，As在较低温度时为固态As₂S₂，900-1400 K以As₂、AsS、AsN气体共存，2000 K以上全部转化为气态AsO。Se在1100 K以下主要以气态H₂Se存在，1100 K开始生成SeS和Se₂气体，1800 K时主要是气态Se和少量气态SeO；Pb在中低温时主要是PbS，1800 K以上气态Pb为主要存在形态。S在还原性气氛下增大了AsS（g）、PbS（g）、SeS（g）的比例，氧化性气氛下对As、Se、Pb形态分布基本无影响；Cl无论在氧化还是还原气氛下对As、Se影响均较小，但对Pb的形态分布影响较大。     

Essential domains and two conjectures in dimension theory

This note investigates two long-standing conjectures on the Krull dimension of integer-valued polynomial rings and of polynomial rings in the context of (locally) essential domains.

     

体效应振荡器特性观测与使用实验教学研究

探讨了体效应振荡器特性观测与使用实验中，编写实验原理要应用能带结构解释负阻特性并通过对偶极畴生长和运动过程的描述说明振荡原理，提出了实验教学方案，从教学效果上分析了开设此实验的意义及合理性。     

用改进嵌入原子法计算Cu晶体的表面能

用改进嵌入原子法(MEAM)计算了Cu晶体12个晶面的表面能.结果表明，密排面(111)的表面能最小.其他晶面的表面能随其晶面与(111)晶面夹角的增加而增加，据此可以粗略地估计各晶面表面能的相对大小.给出的几何结构因子的确定方法及结果可以直接用于计算其他面心立方晶体的表面能及其他特性.在Cu,Ag等面心立方薄膜中出现(111)择优取向或织构的机理是表面能的最小化. 关键词： 改进嵌入原子法 铜 表面能 计算     

Focused ion beam Moiré method

A focused ion beam (FIB) Moiré method is proposed to measure the in-plane deformation of object in a micrometer scale. The FIB Moiré is generated by the interference between a prepared specimen grating and FIB raster scan lines. The principle of the FIB Moiré is described. The sensitivity and accuracy of deformation measurement are discussed in detail. Several specimen gratings with 0.14 and 0.20 μm spacing are used to generate FIB Moiré patterns. The FIB Moiré method is successfully used to measure the residual deformation in a micro-electro-mechanical system structure after removing the SiO₂ sacrificial layer with a 5000 lines/mm grating. The results demonstrate the feasibility of this method.     

用数值方法分析微孔激光器出射光的近场特性

微孔激光器作为应用于近场光信息存储系统中的一种新型光源，它的出射光斑的近场特性对于近场光存储是十分重要的。针对纳米孔径运用角谱进行Fox-Li数值迭代，得到不同孔径微孔激光器的基模光强分布，然后运用二维非线性时域有限差分法分析微孔激光器出射端即微孔金属膜的近场光学性质，模拟计算了不同孔径和厚度的微孔金属膜的光强近场分布，从应用于近场光存储的角度，给出反映其近场光学特性的相关数据。发现由于TM模式下金属存在局域表面等离子增强效应，使得其出射强度比TE模式高一个数量级，从而更适于作为实际中近场光存储系统和原理试验的光学头。