Patterns in the precision of quantitative data from multicomponent gas chromatographic or gas chromatographic-mass spectrometric analysis

The dispersion of the quantitative results in the analysis of volatile compounds from multicomponent mixtures by different fractionation techniques (solid-phase microextraction and direct thermal desorption) followed by GC or GC-MS presents nonrandom patterns related to the existence of different factors in the fractionation process or in the chromatographic separation which affect, to a different extent, the recovery of the sample components. Statistical techniques have been used to show the relative importance of these factors. The improvement in data precision achieved by using volatile compound concentration ratios is discussed.     

Determination of partition behavior of organic surrogates between paperboard packaging materials and air

The suitability of recycled paperboard packaging materials for direct food contact applications is a major area of investigation. Chemical contaminants (surrogates) partitioning between recycled paper packaging and foods may affect the safety and health of the consumer. The partition behavior of all possible organic compounds between cardboards and individual foodstuffs is difficult and too time consuming for being fully investigated. Therefore it may be more efficient to determine these partition coefficients indirectly through experimental determination of the partitioning behavior between cardboard samples and air. In this work, the behavior of organic pollutants present in a set of two paper and board samples intended to be in contact with foods was studied. Adsorption isotherms have been plotted and partition coefficients between paper and air have been calculated as a basis for the estimation of their migration potential into food. Values of partition coefficients (Kpaper/air) from 47 to 1207 were obtained at different temperatures. For the less volatile surrogates such as dibutyl phthalate and methyl stearate higher Kpaper/air values were obtained. The adsorption curves showed that the more volatile substances are partitioning mainly in air phase and increasing the temperature from 70 to 100 degrees C their concentrations in air (Cair) have almost doubled. The analysis of surrogates was performed with a method based on solvent extraction and gas chromatographic-flame ionization detection (GC-FID) quantification.     

Synthesis and Structural Characterization of a Polyoxomolybdate HNa_7[Mo_(36)O_(112)(H_2O)_(16)]·47H_2O

A new polyoxomolybdate complex HNa7[Mo36O112(H2O)16]·47H2O 1 has been prepared in the beaker solution and characterized by single-crystal X-ray diffraction and elemental analyses. Crystal data: H127Mo36Na7O175, Mr = 6542.79, monoclinic, C2/c, a = 40.891(6), b = 17.900(3), c = 25.580(4) , β = 125.673(2)°, V = 15210(4) 3, Z = 4, Dc = 2.857 g/cm3, F(000) = 12464, μ = 3.013 mm-1, R = 0.0633 and wR = 0.1654 (I > 2σ(I)). With the bridging sodium cations, the [Mo36O112(H2O)16]8- units in compound 1 are linked to form a one-dimensional structure, on the basis of which a three-dimensional architecture is further constructed via other sodium cations and complicated hydrogen bonds.     

Microcalorimetry, energetics and binding studies of DNA-dimethyltin dichloride complexes

The interaction of dimethyltin dichloride (Me₂SnCl₂) with calf thymus DNA was studied at 27 °C, pH 7.6 using various techniques including isothermal titration calorimetry (ITC) and UV-Vis, fluorescence and IR spectrophotometries. The binding isotherm and enthalpy curve for Me₂SnCl₂-DNA interaction was a biphasic transition process. This was determined by the analysis of the binding data with the Hill equation. The first phase of the enthalpy curve (exothermic process) was consistent with the first set of binding site, the second phase (endothermic process, less exothermicity) was consistent with second set of binding site from the cited interactions. Our results showed that the first set of binding sites is occupied by one mole of ligand bound per near 1 base pair of DNA. The DNA-ethidium bromide (EB) complex, in the presence of Me₂SnCl₂, caused the quenching of the fluorescence emission. The Scatchard plots illustrated a non-intercalating manner for such quenching. The DNA-EB complex results indicated that the binding of Me₂SnCl₂ is with the phosphate groups of DNA at low ligand concentrations (<9 mM). This was confirmed with the IR spectrophotometric spectra. However, the binding at higher ligand concentrations (>9 mM) was with the base groups of DNA. Therefore, these results suggest that the Me₂SnCl₂ binding to DNA at low concentrations occurs through an outside interaction by an exothermic process. However, the partial unfolding of the DNA caused at higher concentrations of Me₂SnCl₂ is through an endothermic process involving interactions with the base groups.     

A new class of aromatic polyetheraroylhydrazides. I. Synthesis and chemical–physical characterization

A series of new aromatic polyetheraroylhydrazides incorporating 4-oxybenzoyl units has been synthesized, whose general formula was [CONHNHCO? O? O–(CH₂)_x? O? phenyl O-CONHNHCOO]_n with x values in the range of 2 to 12. The increasing number of methylene units in the backbone gave rise to polymers which melted before the hydrazidic linkage underwent thermal cyclation to oxadiazole. Moreover, many polymers showed multiple endotherms on melting. X-ray diffraction studies confirmed a crystalline organization of polyhydrazides for methylene units above 4. © 1993 John Wiley & Sons, Inc.     

The identification of tricyclic neuroleptics and sulphonamides by high-performance thin-layer chromatography

Circular high-performance thin-layer chromatography (HPTLC) has been used to differentiate a series of twelve tricyclic neuroleptics, using both normal phase and reverse phase procedures. The use of normal phase systems also allows the resolution of geometric isomers of chlorprothixene, clopenthixol and flupenthixol. Thirteen sulphonamides and Trirnethoprim may also be distinguished using HPTLC.     

Thermal Analysis of the System Na3AlF6–NaVO3

Summary. The phase diagram of the system Na₃AlF₆–NaVO₃ was determined by means of thermal analysis. The system is a simple binary eutectic one. The eutectic point was estimated at x(NaVO₃) = 0.975 and t _eut = 617°C. The XRD patterns of samples after thermal analysis revealed the presence of cryolite and NaVO₃ only supporting the above assumption of a simple eutectic binary system.     

流动注射电位滴定研究：氟化物沉淀滴定测锂

设计制作了一种简便的梯度混合室,并考察了其性能,试验结果证实了此混合室的合理性和有效性.用此混合室建立了流动注射电位滴定测锂的新方法,载流为1×10~(-5)～1×10~(-4)mol·L~(-1)的F~乙醇-水(9 1)溶液,流速4.2ml·min~(-1),混合室体积400μl,进样体积120μl,分析速度60样·h~(-1),检出范围取决于载流中滴定剂的浓度,方法用于卤水中锂的测定,结果令人满意.     

Determination of orthophosphates using a macro segmented flow analyzer (MSFA) based on colorimetric detection

Fabrication of a macro segmented flow analysis (MSFA) system based on reconfiguration of the manifold by adjustment of the sample/reagent ratio, has been found to produce a sensitive method for orthophosphate analysis based on colorimetric detection at 880 nm. Optimization of sample tube length, reaction temperature and molybdate concentration in the carrier solutions has been carried out. The larger sample tube internal diameter led to the combined advantages of better sensitivities, wider working range and higher sample throughput over most existing methods. Using the optimized conditions of 50.0 cm sample tube length (1.6 mm i.d.), 37.0 °C reaction temperature and 0.0113 M molybdate concentration in the carrier solution, the calibration model for orthophosphate standard solutions was found to be linear (y = 0.04895x + 0.003561; correlation coefficient, r²=0.9970) over the working range 0.01-2.00 mg l⁻¹ orthophosphate. The volume of the sample injected was 1.396 ml at a flow rate of 6.0 ml min⁻¹. The sample throughput of this MSFA method was 40 samples per an hour, with a detection limit of 4.0 μg l⁻¹, and %R.S.D.’s below 5%. The MSFA method was successfully applied to analysis of water and wastewater samples.