浅析公路路基主要病害的原因及防治措施

文章通过对公路路基主要病害产生原因的详细分析,探讨并提出了一系列相应的防治措施。     

南屯矿63_上10面综采放顶煤开采覆岩移动变形破坏特征研究

本文根据使用新技术──双回路注（放）水系统在６３上１０工作面综采放顶煤开采覆岩破坏的探测结果，结合其它采矿方法的实测结果，应用断裂力学理论，研究了放顶煤开采覆岩移动变形破坏特征，为矿井安全生产提供了依据。     

淬火工艺对铬结构钢显微组织和机械性能的影响

本文研究了淬火工艺对低和中碳铬钢的显微组织,冲击韧性和断裂机制的影响,得出了无论是低碳,还是中、高碳钢,当奥氏体长大倾向稍大时,采取提高加热温度进行淬火的工艺均为不可取的结论。     

无失效数据的Bayes和多层Bayes分析

本文推广了文献[6]的结果，对指数分布无失效数据的失效率，给出了Bayes估计、Bayes置信上限以及多层Bayes估计，从而可以得到无失效数据可靠度的估计，最后，结合实际问题进行了计算。     

缩合型硅橡胶与金属的粘接研究

在以南大α系列硅烷偶联剂为基础的交联增粘体系中,引入某些γ系列硅烷偶联剂及增粘助剂,制成单组分室温硫化型粘合剂,并测定了其与铝、铜及不锈钢的粘接性能关系.研究表明:在既定的体系中加入KH-550、KH-792、WD-30以及KH-550与KH570的反应物可有效提高粘合剂对铝合金、黄铜及不锈钢的内聚破坏率,而且KH-550、KH-792还有助于改善粘合剂的贮存稳定性.     

Mechanical endurance of polymer electrolyte membrane and PEM fuel cell durability

The life of proton exchange membrane fuel cells (PEMFC) is currently limited by the mechanical endurance of polymer electrolyte membranes and membrane electrode assemblies (MEAs). In this paper, the authors report recent experimental and modeling work toward understanding the mechanisms of delayed mechanical failures of polymer electrolyte membranes and MEAs under relevant PEMFC operating conditions. Mechanical breach of membranes/MEAs in the form of pinholes and tears has been frequently observed after long‐term or accelerated testing of PEMFC cells/stacks. Catastrophic failure of cell/stack due to rapid gas crossover shortly follows the mechanical breach. Ex situ mechanical characterizations were performed on MEAs after being subjected to the accelerated chemical aging and relative humidity (RH) cycling tests. The results showed significant reduction of MEA ductility manifested as drastically reduced strain‐to‐failure of the chemically aged and RH‐cycled MEAs. Postmortem analysis revealed the formation and growth of mechanical defects such as cracks and crazing in the membranes and MEAs. A finite element model was used to estimate stress/strain states of an edge‐constrained MEA under rapid RH variations. Damage metrics for accelerated testing and life prediction of PEMFCs are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2346–2357, 2006     

断裂力学理论及其研究方法在材料学中的应用

综述了断裂力学理论的产生和发展的历史过程及断裂力学理论的主要内容.论述了断裂力学的两大理论线弹性断裂力学理论和弹塑性断裂力学理论的主要内容及其研究方法在材料磨损研究以及估算材料使用条件和安全寿命研究方面取得的成果以及发展水平.     

有机薄膜电致发光器件失效过程的动态观测及分析

对有机薄膜电致发光器件失效的全过程进行了显微动态观察，发现器件工作时，有机层／金属界面形成的气泡逐渐变大变多，最终导致器件完全失效，气泡不仅含有水汽，还存在大量有机气体。     

Body waves in fractured porous media saturated by two immiscible newtonian fluids

A study of body waves in fractured porous media saturated by two fluids is presented. We show the existence of four compressional and one rotational waves. The first and third compressional waves are analogous to the fast and slow compressional waves in Biot's theory. The second compressional wave arises because of fractures, whereas the fourth compressional wave is associated with the pressure difference between the fluid phases in the porous blocks. The effects of fractures on the phase velocity and attenuation coefficient of body waves are numerically investigated for a fractured sandstone saturated by air and water phases. All compressional waves except the first compressional wave are diffusive-type waves, i.e., highly attenuated and do not exist at low frequencies.Now at Izmir Institute of Technology, Faculty of Engineering, Gaziosmanpasa Bulvari, No.16, Cankaya, Izmir, Turkey.     

Slow crack growth in blends of HDPE and model copolymers

The resistance to slow crack growth (SCG) was measured in binary blends of high density polyethylene (HDPE) and 5–10% concentrations of model ethylene-butene random copolymers by measuring the time to failure (t_f) under a constant stress intensity. An increase of t_f with the addition of the copolymer if the copolymer could crystallize and the increase was greater the higher branch density. The copolymer with 117 branches/1000C could not crystallize and therefore its blend had a t_f that was less than that of the HDPE. The fracture energies of the blends as determined by their resistance to SCG were compared with the energy by rapid fracture, J_c, as previously measured by Rhee and Crist. It is concluded that SCG is more sensitive to variations in the microstructure than is rapid fracture and that the differences in SCG behavior can be qualitatively explained in terms of the differences in microstructure of the blends. ©1995 John Wiley & Sons, Inc.