Effect of Templates on the Structure and Stability of Ti-TMS

Mesoporousmaterialsareofgreatinteresttocatalysisbecauseoftheirlargeanduniformporesize(20~100A),whichallowstereo-hinderedmoleculesfacilediffusiontointernalactivesites.Althoughrecenteffectshavesuggestedthatitshouldbepossibletosynthesizemesoporousmateri...     

溶胶-凝胶模板法制备钛酸钡纳米管

采用氢氧化钡和钛酸四丁酯为前驱体, 溶胶-凝胶结合模板法制备了钛酸钡纳米管, 通过SEM, TEM, XPS和XRD等表征分析, 钛酸钡纳米管直径100 nm, 钛酸钡为立方相结构, 晶胞参数a＝3.995 Å.     

烟草模板制备掺杂过渡金属铈锆固溶体及其催化氧化CO性能研究

以烟梗丝、烟叶片和烟梗条等材料为模板掺杂过渡金属合成了一系列铈锆固溶体材料.对合成的材料进行了扫描电子显微镜(SEM)、N2吸附-脱附、程序升温还原(H2-TPR)、X-射线衍射法(XRD)、储氧量(OSC)、X-射线光电子能谱(XPS)等表征.对铈锆固溶体材料进行CO氧化活性评价,结果表明不同烟草模板制备的铈锆固溶体性能不同.以烟叶片为模板制备的掺铜铈锆固溶体具有极高的储氧量,高达2961μmol/g,但该材料催化氧化CO的活性并非最强.以烟梗丝为模板制备的掺铜铈锆固溶体在铈锆比为45∶45∶10时,对CO氧化有着很好的催化活性,起燃活性温度(T50)为91℃.     

柚子皮衍生的分级多孔碳作为高性能超级电容器的电极材料

使用CTAB作为软模板,水热处理柚子皮,再以碳化和KOH活化过程得到了分级多孔碳(HPC),这种分级多孔碳材料的比表面积高达1 813 m~2·g~(-1),相比于没有水热步骤制备的多孔碳(PC),拥有更加丰富的介孔结构和更大的比表面积。XPS分析结果表明HPC的氧掺杂量更高,会比PC贡献更大的赝电容。三电极测试体系中,HPC的比电容达到285 F·g~(-1)(0.5 A·g~(-1),1 mol·L~(-1)KOH)。同时,组装的两电极对称超级电容器拥有很好的倍率性能,循环12 000次充放电后,比电容依旧保留99%。HPC拥有这样优异的性能归结于较大的比表面积,高氧掺杂量和合理的孔径分布的协同作用。     

α-氧化铁介孔纳米材料的制备及其在锂/钠离子电池中的电化学性能

采用硬模板法合成了具有六方排列的平行圆柱形有序孔道介孔α-氧化铁(α-Fe_2O_3),并将其用作锂离子、钠离子电池的负极材料。所制备的介孔α-Fe_2O_3凭借其独特的有序介孔结构,有效缓解电极在充放电过程中的体积效应,提高了电解液浸润性,促进锂/钠离子的转移和传输,从而在锂离子及钠离子电池中均表现出优异的电化学性能。作为锂离子电池负极时,其首圈放电比容量为983.9 mAh·g~(-1)。经过100次循环后,其放电比容量为1 188.0 mAh·g~(-1)。在钠离子电池中,其首圈放电比容量为687.7mAh·g~(-1)。经过50次循环后,仍有316.9 mAh·g~(-1)的放电比容量。     

碳模板诱导生长Fe-Nx活性位点

能源危机和环境恶化是当今社会面临的巨大挑战. 燃料电池作为一种高效、清洁的发电装置,受到了社会各界特别是新能源行业的高度关注. 尤其是, 日本丰田推出Mirai燃料电池汽车量产上市计划, 把燃料电池及其关键技术发展推向了一个新的发展纪元. 然而, 制约燃料电池走向大规模商业化的核心问题依然是其综合性能不具竞争力. 其中, 氧电极的缓慢动力学以及贵金属Pt的有限资源、高昂成本等是关键所在, 因此, 亟待实现高性能非贵金属催化剂的突破.近年来, 大量研究表明, Fe-Nx掺杂的碳催化剂具有极大的代Pt潜力, 研究者们尝试各种手段进行开发,如: 调控Fe化合物及N前驱体的类型与添加量, 改变温度、压力等合成条件, 采用轴向配位体连接、共价接枝、球磨等非热解路线, 构建核壳、有序介孔碳、阵列、类石墨烯薄片、多孔碳等碳纳米结构, 制备石墨烯/碳纳米管、石墨烯/碳黑、碳纳米带/碳纳米管、碳纳米颗粒/碳纤维、碳球/碳纳米管/石墨烯等复合材料, 进行酸洗、造孔、二次加热等后处理, 调控不同类型Fe物种相生成等. 此外, EXAFS及M?ssbauer等谱学技术已经证实Fe-Nx特别是Fe-N4为强活性位点. 因此, 有待提出合理策略以促进非贵金属碳催化剂中Fe-Nx强活性位点的高密度掺杂.本文提出了一种碳模板诱导Fe-Nx活性位点生长的方法即通过高温热解含有Fe盐的三聚氰胺前驱体混合物, 成功制备 了Fe-Nx掺杂的碳催化剂, 并结合多种表征技术证实了碳模板对制备碳催化剂结构组成及电化学性能的影响. 形貌结果说明, 碳模板的引入有利于Fe、N化合物的均匀吸附以至于Fe基纳米颗粒的均一成核, 促使竹状碳纳米管在碳模板表面以及中间均一生长; 氮气吸脱附及孔径分布曲线显示, 引入碳模板形成的复合材料较单一的碳纳米管和碳黑材料具有提高的比表面积和总孔体积, 说明复合材料中存在两种单体的有效协同; M?ssbauer、XPS及XRD测试数据证实, 碳模板可以调控Fe、N两种元素的耦合方式, 能够抑制金属Fe和Fe碳化物等非活性Fe物种的生成、诱导Fe-N4和其它Fe氮化物等强活性Fe-Nx物种的生长. 电化学测试数据表明, 复合材料具有提升的面积活性和质量活性, 且TOF值明显提高, 说明碳模板的引入增强了Fe-Nx位点的本征活性; 此外, 复合材料的氧还原过程为高效的4e-途径, 且较商业Pt/C催化剂表现出了优异的循环稳定性和甲醇耐受性.     

One‐pot synthesis of a multi‐template molecularly imprinted polymer for the extraction of six sulfonamide residues from milk before high‐performance liquid chromatography with diode array detection

A highly selective molecularly imprinted polymer sorbent was synthesized and employed for the simultaneous determination of six sulfonamide antibiotic residues (sulfanilamide, sulfacetamide, sulfadiazine, sulfathiazole, sulfamerazine, and sulfamethizole) in milk samples. Multi‐analyte imprinted particles were used as a sorbent in solid‐phase extraction. Sulfonamides were separated on a high‐performance liquid chromatography column (Merck–Lichrospher RP18e, 5 μm 250 × 4 mm) and further identified and quantified by diode array detection. Several parameters including required loading of the molecularly imprinted polymer sorbent, mass of milk, volume, and type of elution solvent, as well as time for absorption and elution were investigated to obtain optimal experimental conditions. For comparison purpose, a non‐imprinted polymer was applied under the optimum conditions. The validation study according to the European Union Decision 2002/657/EC was based on the investigation of linearity, selectivity, stability, limits of detection and quantitation, decision limit, detection capability, trueness, precision, and ruggedness according to Youden's approach. The decision limit and detection capability values in the milk were achieved from 101.9 to 113.5 μg/kg and from 114.4 to 135.4 μg/kg, respectively, depending on the target sulfonamide drug. Finally, the optimized protocol was successfully applied to commercial milk samples and human breast milk.     

Preparation of dummy template‐imprinted polymers for the rapid extraction of nonsteroidal anti‐inflammatory drugs residues in aquatic environmental samples

A molecularly imprinted polymer was synthesized and applied as a sorbent in the solid‐phase extraction device. The imprinted polymer was characterized by fourier‐transform infrared spectroscopy and scanning electron microscope. The results revealed that imprinted polymer possess sensitive selectivity and reliable adsorption properties for five NSAIDs. The imprinted polymer was successfully applied to the pre‐concentration for five NSAIDs in different water samples prior to UPLC‐MS/MS. In the early studies, several factors were investigated, including pH adjustment, the kind of elution solvent and the volume of elution solvent. Finally, we found that the pH 5 and an aliquot of 2 mL methanol were suitable for the water samples. The limits of detection and limits of quantitation of five nonsteroidal anti‐inflammatory drugs varied from 0.007 to 0.480 μg L⁻¹ and 0.03 to 1.58 μg L⁻¹, respectively. The spiking recoveries of the target analytes were 50.33‐127.64% at the levels of 0.2 μg L⁻¹, 2 μg L⁻¹ and 5 μg L⁻¹. The precision and accuracy of this method showed a great increase compared with traditional solid‐phase extraction. The developed method was successfully applied to extraction and analysis of NSAIDs in different water samples with satisfactory results which could help us better understand their environmental fate and risk to ecological health.     

金、铜金属纳米棒或纳米线的AFM和SERS的研究(英文)

通过电化学氧化法制备具有不同孔径氧化铝模板 ,利用交流电镀的方法在模板中沉积金属 ,再用酸溶解模板可以得到相应尺度的金属纳米线或纳米棒的阵列 .本文利用原子力显微镜和表面增强拉曼技术分别表征了金和铜两种金属纳米线阵列 .研究结果表明 ,作为探针分子的硫氰(SCN )在金属纳米线上的碳氮三键的振动频率随纳米线直径的增大而蓝移 .这一现象可能是因为尺寸效应对纳米线的费米能级造成影响 ,使不同直径的金属纳米线电子结构存在微小的差别 .     

Synthesis of polymers by template polymerization. I. Template polymerization of poly(methacrylic acid) with β‐cyclodextrin

A novel template monomer with multiple methacryloyl groups was synthesized with β‐cyclodextrin by the acetylation of primary hydroxyl groups and the esterification of secondary hydroxyl groups with methacrylic acid anhydride. The average number of methacryloyl groups in the monomer was 11. The radical polymerization of the monomer was carried out with the following initiators: α,α′‐azobisisobutylonitrile, H₂O₂? Fe²⁺ redox initiator, p‐xylyl‐N,N‐dimethyldithiocarbamate (XDC), and α‐bromo‐p‐xylyl‐N,N‐dimethyldithiocarbamate (BXDC). When the concentration of the monomer was less than 4.12 × 10^?3 M, polymerization was limited inside the molecule, and gelation of the system was hindered. For controlled radical photopolymerization with XDC and BXDC, the methacryloyl groups of the monomer were homogeneously polymerized, and poly(methacrylic acid) with a narrow molecular weight distribution was obtained by the hydrolysis of the polymerized products. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3539–3546, 2001