Synthesis,Characterization and DFT Calculation of a New Silver(I) Iodid Templated by Conjugated Cation:(ipq)_4Ag_4I_8

1 INTRODUCTION The construction and characterizations of low dimensional inorganic/organic hybrid materials have increasingly attracted the interest of chemists duo to their unusual topologies and relevance in a wide range of applications in materials science including transport, magnetic materials, catalysts, and lumi- nescent materials[1]. Among the various families of hybrid functional materials, the family of metal halides is an important one. As a branch of the metal halides, silver(…     

化学发光消耗型锰传感器

化学和生物发光是由化学反应产生的一种光辐射,不需要任何光源。又由于它们具有高灵敏度、宽线性范围和相对比较便宜的仪器等优点,因而在化学和生物传感器领域引起了广泛的兴趣。已用于H_2O_2、乳酸和胆固醇等多种生物活性物质的测定,但未见有金属离子传感器的报道。本文发展了一种新型的全固态模式的消耗型锰离子化学发光传感器。该传感器将除待测物外的所有化学发光反应试剂全部固定在阴离子交换树脂Amberlyst A-27上,于化学发光反应之前,将一定量化学发光试剂从固定化试剂柱上洗脱,与样品中的锰离子产生化学发光。已成功地应用于水样中痕量锰离子的测定。每个固定化试剂柱可连续使用100次以上。 1 实验部分 1.1 仪器和试剂 化学发光传感器由流动系统和检测系统两部分组成。其中流动系统主要由蠕动泵、六通阀、固定化试剂柱和流通池组成。检测系统由光电信增管、负高压、放大器和记录仪组成(图1)。     

Interconnection between the Structures and Sorption Characteristics of Mesophase Materials of MCM-41 Type Containing Alkylpyridines

Under the conditions studied for the synthesis of mesophase materials with alkylpyridinium halides an increase in the density of packing of these molecules in the encapsulated micelles was observed with an increase in the length of the alkyl radicals. The difference in the density of packing of these surface active reagents (SAR) depended to a considerable extent on the perfection of the hexagonal structure and the characteristic absorption properties of the mesophase materials of MCM-41 type.     

Mesoporous Titanium-containing Silicas. Synthesis and geometrical characteristics

Mesoporous titanium-containing silicas with TiO₂ contents from 1 up to 70 mol% were prepared. The obtained samples have been characterized by the powder X-ray diffraction data, the diffuse reflectance infrared Fourier transform method, and nitrogen adsorption at 77 K. Specific surface area, total pore volume, distribution pore volume on pore sizes were determined from nitrogen adsorption isotherm for synthesized titanosilicas. This revised version was published online in August 2006 with corrections to the Cover Date.     

一种新颖有机-无机杂化配位聚合物[(C_(10)H_(16)N)_2(Pb_2I_6)·2DMF·H_2O]_n的自组装合成和晶体结构

0IntroductionConstructionoflow鄄dimensionalorganic鄄inorgan鄄icsupramoleculararrayswithnovelpropertiesrepre鄄sentsnewdirectionsinsolid鄄statechemistry[1,2].Gener鄄allythephysicalpropertiesofsuchlowdimensionalcompoundsdifferfromthoseoftheparentcompound.Our     

Ag核Au壳双金属复合纳米线的制备及其表面增强拉曼光谱研究

采用氧化铝模板结合交流电沉积技术制备纯银纳米线, 然后通过化学还原方法, 并控制加入的金盐的量, 在已制备好的银线表面包裹不同厚度的金壳层, 得到具有核壳结构的Ag_核Au_壳复合纳米线. 采用电子显微镜(SEM, TEM)和表面增强拉曼光谱对该复合结构纳米线进行相关表征, 纳米线的表面形貌与加入的金盐的量有关. 以苯硫酚(TP)和对巯基苯胺(PATP)为探针分子, 研究了此类复合纳米线的表面增强拉曼散射效应. 并以PATP在金银纳米线表面吸附的表面增强拉曼光谱的差别为探针, 表征了复合纳米线表面金的包裹程度, 结果表明一定厚度的包裹程度可制备无针孔效应的核壳结构金银复合纳米线.     

具有平整表面的定向纳米碳管膜的制备

为了获得表面平整的定向纳米碳管，通过化学及物理的方法将纳米碳管膜进行反转，使其原来的AAO模板底面成为新的表面，用溶液逐步去除表面的铝和氧化铝后，获得了平整的定向纳米碳管膜表面，从而可将其作为工作面使用. 还比较了5％NaOH和6%H₃PO₄＋1.8%H₂CrO₄溶液去除氧化铝的效果.     

丙烯在ZSM-5沸石上齐聚反应的研究 Ⅰ. 模板剂用量对丙烯齐聚反应的影响

考察了不同正丁胺（NBA）模板剂用量合成ZSM-5沸石的物化特性和催化性能。采用XRD、SEM、NH3-TPD和BET等手段对合成样品的物化特性进行了表征。结果表明，模板剂与SiO2摩尔比在0.67～0.22时合成的ZSM-5沸石结晶度高于90%；随着模板剂用量的减少，ZSM-5沸石的平均粒径减小，强酸量也存在相同的趋势。丙烯齐聚反应评价结果显示,模板剂用量对合成ZSM-5沸石的催化活性有显著影响，模板剂与SiO2摩尔比在0.67～0.45之间合成的沸石催化性能较好。