震区中小跨径桥梁墩柱配筋率取值范围

为研究配筋率对钢筋混凝土桥梁延性抗震性能的影响,并在不同设防烈度对主筋配筋率的合理取值进行细分。以钢筋混凝土桥梁为研究对象,通过拟静力模型试验与有限元数值分析的方法,研究竖向钢筋(主筋)配筋率对桥墩延性的影响,提出典型桥墩的多级性能水平量化指标;并探究在氯离子侵蚀的恶劣环境下,不同配筋率对桥梁抗震性能所带来的影响,从而对氯离子侵蚀环境下的震区中小跨径桥梁墩柱配筋率取值范围提供参考建议。结果表明：考虑氯离子侵蚀作用下的恢复力模型能够较好地反映刚度的退化特性,墩柱的最佳配筋率取值范围为1.11%～2.72%;当加速度为0.3g(g为重力加速度)时,仅从配筋率的角度已无法满足墩柱的损伤指标,建议采用减隔震体系进行抗震设计,如采用延性体系时配筋率不得小于2.64%。研究结果可为中小跨径连续桥梁抗震设计提供参考。     

城镇企业职工基本养老金调整方案测算研究

我国尚未针对城镇企业职工基本养老金的调整比例出台公式化的操作规则,给养老金调整政策的出台带来了压力。为此,本研究依据养老金调整目标和人口老龄化形势,设定养老金调整参数;借鉴国际经验,基于2005~2021年全国数据设计并测算3种基本养老金调整方案,从人口结构与经济发展角度衡量各方案;进而基于最优方案对我国2022~2050年间的养老金调整比例和养老金负担水平进行测算,根据测算结果,提出探索建立科学、合理的基本养老金调整机制的政策建议。     

基于掺铕钨酸盐荧光强度比的非接触温度传感

为了突破传统测温技术应用的局限性,利用NaY （WO₄）₂：Eu³⁺玻璃陶瓷（glass ceramics,GC）实现了具有非接触、实时响应、自校准等优势的双模荧光强度比（luminescence intensity ratio,LIR）测温。采用高温熔融淬灭法制备出含NaY （WO₄）₂：Eu³⁺纳米晶的透明GC样品,并进行系列光谱测量和热敏性能分析。结果表明,样品中Eu³⁺的激发态能级⁵D₁和⁵D₀和基态能级⁷F₂和⁷F₀为两对独立的热耦合能级,可分别基于这两对热耦合能级实现性能优异的双模LIR温度传感。该双模LIR测温技术数据可靠、测温范围广、灵敏度高,再结合GC材料优势,是可用于光纤温度传感器的核心技术材料。     

Critical exponents,hyperscaling, and universal amplitude ratios for two- and three-dimensional self-avoiding walks

We make a high-precision Monte Carlo study of two- and three-dimensional self-avoiding walks (SAWs) of length up to 80,000 steps, using the pivot algorithm and the Karp-Luby algorithm. We study the critical exponentsv and 2 ₄ – as well as several universal amplitude ratios; in particular, we make an extremely sensitive test of the hyperscaling relationdv = 2 ₄ –. In two dimensions, we confirm the predicted exponentv=3/4 and the hyperscaling relation; we estimate the universal ratios <R _g ² >/<R _e ² >=0.14026±0.00007, <R _m ² >/<R _e ² >=0.43961±0.00034, and ^*=0.66296±0.00043 (68% confidence limits). In three dimensions, we estimatev=0.5877±0.0006 with a correctionto-scaling exponent ₁=0.56±0.03 (subjective 68% confidence limits). This value forv agrees excellently with the field-theoretic renormalization-group prediction, but there is some discrepancy for ₁. Earlier Monte Carlo estimates ofv, which were 0.592, are now seen to be biased by corrections to scaling. We estimate the universal ratios <R _g ² >/<R _e ² >=0.1599±0.0002 and ^*=0.2471±0.0003; since ^*>0, hyperscaling holds. The approach to ^* is from above, contrary to the prediction of the two-parameter renormalization-group theory. We critically reexamine this theory, and explain where the error lies. In an appendix, we prove rigorously (modulo some standard scaling assumptions) the hyperscaling relationdv = 2 ₄ – for two-dimensional SAWs.     

The distribution of the likelihood ratio for mixtures of densities from the one-parameter exponential family

We here consider testing the hypothesis ofhomogeneity against the alternative of a two-component mixture of densities. The paper focuses on the asymptotic null distribution of 2 log _n , where _n is the likelihood ratio statistic. The main result, obtained by simulation, is that its limiting distribution appears pivotal (in the sense of constant percentiles over the unknown parameter), but model specific (differs if the model is changed from Poisson to normal, say), and is not at all well approximated by the conventional ₍₂₎ ² -distribution obtained by counting parameters. In Section 3, the binomial with sample size parameter 2 is considered. Via a simple geometric characterization the case for which the likelihood ratio is 1 can easily be identified and the corresponding probability is found. Closed form expressions for the likelihood ratio _n are possible and the asymptotic distribution of 2 log _n is shown to be the mixture giving equal weights to the one point distribution with all its mass equal to zero and the ²-distribution with 1 degree of freedom. A similar result is reached in Section 4 for the Poisson with a small parameter value (0.1), although the geometric characterization is different. In Section 5 we consider the Poisson case in full generality. There is still a positive asymptotic probability that the likelihood ratio is 1. The upper precentiles of the null distribution of 2 log _n are found by simulation for various populations and shown to be nearly independent of the population parameter, and approximately equal to the (1–2)100 percentiles of ₍₁₎ ² . In Sections 6 and 7, we close with a study of two continuous densities, theexponential and thenormal with known variance. In these models the asymptotic distribution of 2 log _n is pivotal. Selected (1–) 100 percentiles are presented and shown to differ between the two models.     

砂土中螺旋桩在斜拉荷载作用下的承载性能

为研究斜拉荷载倾斜角度和叶片埋深对螺旋桩极限承载力的影响,基于ABAQUS软件构建了砂土中螺旋桩的有限元模型,通过螺旋桩水平承载机理砂箱试验与竖向拉拔试验数据,对模型的准确性和可行性进行验证。设置4组不同叶片埋深的螺旋桩模型,分别施加不同角度的斜拉荷载,探讨了砂土地基中螺旋桩的承载性能与斜拉角度、叶片埋深的相关性。结果表明:砂土中螺旋桩的极限承载力随着斜拉角度的增大不断减小;当斜拉角度小于30°时,螺旋桩极限承载力与斜拉角度的关系曲线近似呈线性;螺旋桩极限承载力存在一个临界埋深比,当埋深比大于等于4时,承载力不随埋深比的增大而变化。推导了深埋状态下螺旋桩受斜拉荷载作用的极限承载力公式,经验证该公式能较好反映螺旋桩极限承载力随斜拉角度增大而逐渐下降的规律。     

基于水光电力系统时序生产模拟模型的水光优化配比研究

基于考虑系统负荷、新能源发电出力等时序变化特性的时序生产模拟法,建立了水光电力系统时序生产模拟模型;从系统结构性、经济性、灵活性与可靠性方面综合确定最佳水光容量配比,并通过金沙江上游川藏段水光系统验证了模型的合理性。金沙江上游川藏段光伏电站与水电站出力具有较好的年内、日内互补特性;对于2030年水平年,考虑枯期水电留存,913.6万kW水电配套400万kW光伏的方案综合性能更优,其新增非水可再生电量约60亿kW·h。     

常压射流等离子体处理PET膜诱导自由基研究

为了考察常压射流等离子体(APPJ)处理对PET膜表面诱导自由基及其引发接枝共聚反应的效能,采用电子自旋共振技术(ESR)对APPJ处理前后PET膜表面生成的自由基及其衰变行为进行测试分析,并与接枝率测试结果进行对比。结果表明:纯He气体的APPJ处理更易引发PET膜表面生成自由基,处理时间越长,膜表面自由基浓度越高,自由基产物的稳定性受存储条件影响显著,自由基浓度越高的样品对应的接枝率也越高。     

Chapter 15 DEA/AR analysis of the 1988–1989 performance of the Nanjing textiles corporation

This article employs new data envelopment analysis/assurance region (DEA/AR) methods to evaluate the efficiency of the 35 textile factories of the Nanjing Textiles Corporation (NTC), Nanjing, China. The returns to scale (RTS) of these factories were studied without assuming that the optimal DEA solutions were unique. All DMUs are identified with pointsE (Extreme Efficient),E (Efficient but not an extreme point) andF (Frontier but not efficient). We then further identify the nonfrontier DMUs with pointsNE, NE andNF according to whether they are projected onto a point inE, E, orF en route to evaluating their performances. All of the inefficient factories were in classNF and had unique optimal primal-dual solution pairs. Consequently, the solution pairs satisfy the strong complementary slackness condition (SCSC). Application of cone-ratio (CR) ARs reduced significantly the number of factories in classE, and showed that some AR-efficient factories were more flexible in adopting the mixture of central planning and market economies that China currently is trying to use. Also, linked-cone (LC) ARs were applied to measure maximum and minimum profit ratios. The SCSC multiplier space approach was utilized to analyze the sensitivity of the efficiency results to potential errors in the data with and without ARs. The results in this article suggest that collective units had a better performance than state-owned units in the two consecutive years analyzed.This paper was written while the author was at the School of Economics and Management, Southeast University, Nanjing 210018, P.R. China.