Surface roughness investigation of semi-conductor wafers

Conventionally, surface roughness is predominantly determined through the use of stylus instruments. However, there are certain limitations involved in the method, particularly when a test specimen, such as a silicon wafer, has a smooth mirror-like surface. Hence, it is necessary to explore alternative non-contact techniques. Light scattering has recently been gaining popularity as an optical technique to provide prompt and precise inspection of surface roughness. In this paper, the total integrated scattering (TIS) model is modified to retrieve parameters on surface micro-topography through light scattering. The applicability of the proposed modified TIS model is studied and compared with an atomic force microscope. Experimental results obtained show that the proposed technique is highly accurate for measuring surface roughness in the nanometer range.     

提高YBCO块材在外磁场中悬浮力

本给出了三种提高YBCO块材在外磁场中悬浮力的方法．第一种方法是增强外磁场，对于此方法，本研究了一块直径为30mm的圆柱状YBCO块材分别在圆柱状NdFeB永磁体和NdFeB永磁导轨上的悬浮力．测量结果表明在77K温度下YBCO块在圆柱状NdFeB永磁体上的最大悬浮力为50N，在NdFeB永磁导轨上的最大悬浮力为103．ON．第二种方法是提高YBCO块材自身的性能，包括临界电流密度、俘获磁通和块材尺寸，对于此方法，本仅研究了块材尺寸对悬浮力的影响．三块直径分别为30mm、35mm、40mm的圆柱状YBC0块材在NdFeB永磁导轨上的悬浮力被测量，77K温度下5mm悬浮间距时的悬浮力分别为103．ON、134．5N、175．ON．第三方法是将YBCO块材变成准永久磁体，此种情况下，直径为40mm的圆柱状YBCO块材在77K温度下5mm悬浮间距时的悬浮力高达218．3N．     

The modified characteristic finite difference fractional steps method for the coupled system of fluid dynamics in porous media and its analysis

For the coupled system of multilayer fluid dynamics in porous media, the modified characteristic finite difference fractional steps method applicable to parallel arithmetic is put forward and two‐dimensional and three‐dimensional schemes are used to form a complete set. Some techniques, such as calculus of variations, energy method, piecewise biquadratic interpolation, multiplicative commutation rule of difference operators, decomposition of high order difference operators and prior estimates are adopted. Optimal order estimates in L² norm are derived to determine the error in the approximate solution. This method has already been applied to the numerical simulation of multilayer fluid dynamics in porous media. © 2003 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 19: 665–681, 2003.     

非保守力和非完整约束对Hamilton系统Lie对称性的影响

研究非保守力和非完整约束对Hamilton系统的Lie对称性和守恒量的影响.分别研究了Hamilt on系统受到非保守力和非完整约束作用时，系统的Lie对称性保持不变的条件，同时给出了 系统的结构方程和守恒量保持不变的条件.以著名的Emden方程和Appell-Hamel模型为例进行 了分析讨论. 关键词： 分析力学 Hamilton系统 非保守力 非完整约束 对称性 守恒量     

非对称核物质中同位旋对称势的动量和密度依赖性

在Brueckner-Hartree-Fock理论框架内, 研究了同位旋非对称核物质中质子和中子单粒子势的动量相关性及其随同位旋非对称度的变化, 在此基础上计算了同位旋对称势, 并讨论了三体核力的影响. 结果表明同位旋对称势对于同位旋非对称度的依赖性很弱, 但对于动量和密度均有较强的依赖性. 当密度固定时, 同位旋对称势随动量增加而减小. 尽管三体核力对于质子和中子单粒子势的动量相关性有较大影响, 但对同位旋对称势的影响很小. 还与目前重离子碰撞输运理论模型中所使用的各种参数化的唯象对称势进行了比较.     

A new VOF‐based numerical scheme for the simulation of fluid flow with free surface. Part II: application to the cavity filling and sloshing problems

Finite element analysis of fluid flow with moving free surface has been performed in 2‐D and 3‐D. The new VOF‐based numerical algorithm that has been proposed by the present authors (Int. J. Numer. Meth. Fluids, submitted) was applied to several 2‐D and 3‐D free surface flow problems. The proposed free surface tracking scheme is based on two numerical tools; the orientation vector to represent the free surface orientation in each cell and the baby‐cell to determine the fluid volume flux at each cell boundary. The proposed numerical algorithm has been applied to 2‐D and 3‐D cavity filling and sloshing problems in order to demonstrate the versatility and effectiveness of the scheme. The proposed numerical algorithm resolved successfully the free surfaces interacting with each other. The simulated results demonstrated applicability of the proposed numerical algorithm to the practical problems of large free surface motion. It has been also demonstrated that the proposed free surface tracking scheme can be easily implemented in any irregular non‐uniform grid systems and can be extended to 3‐D free surface flow problems without additional efforts. Copyright © 2003 John Wiley & Sons, Ltd.     

Structural characterization of nanopatterned surfaces

In this work, chemically and topographically nanopatterned surfaces were produced by a top-down processing approach for biosensing devices. The nanopatterning was the result of the combination of plasma polymerisation (pp) of biofunctional materials and colloidal lithography techniques. The morphological and chemical properties induced by the plasma deposition-etching treatment were characterised by optical method combining ellipsometry and Fourier Transform Infrared spectroscopy studies. This method supported by atomic force microscopy measurements, allowed the full optical characterization of each step of the top-down process. The optical characterization of the end-up nanopatterned samples demonstrated that the chosen process is able to produce well-defined nanostructured surfaces with controlled chemical and morphological properties.     

提升普通高校学报影响力的措施和方法

分析了普通高校学报影响因子低、影响力小的原因,重点论述了提高普通高校学报被引频次、影响因子和影响力的措施和方法.     

磁路参量探讨

建议引出磁容、磁感、磁阻、磁导、磁动势等参量。建立了等效路上的对偶性定理。讨论了近十种重要的推理或应用。     

带观测器的电液力伺服变极点数控系统的设计

本文在阐述变极点最优控制原理及其在电液力伺服系统中的实施之基础上，又进行了变极点控制的离散化处理和离散降维观测器对系统的状态重构，解决了系统稳定性与响应速度的矛盾，为该系统微机控制软、硬件的实观奠定了理论基础