Dynamic Deformation Behavior of a Golf Ball during Normal Impact

The normal impact between a golf ball and a rigid steel target was studied to examine ball deformation and the contact force during the impact. Using high-speed video images, the normal and tangential compression ratios of the ball were measured to analyze the ball deformation quantitatively. In addition, the inbound and rebound ball velocities, contact time, and coefficient of restitution were determined as basic parameters of the impact. As the inbound ball velocity increased, the maximum normal compression ratio increased while the maximum tangential compression ratio, contact time and coefficient of restitution decreased. The ball center displacements during the impact were measured to determine the ball center velocity and acceleration, and the contact force was calculated by the product of the mass and acceleration. The contact force increased almost linearly with the inbound ball velocity, and its relationship agreed well quantitatively with the results from a load-cell, and also agreed well qualitatively with Hertz contact theory.     

爆炸冲击载荷作用下岩石的损伤实验

基于声波测试原理,利用RSM-SY5智能型声波仪,对某露天矿围岩在爆破冲击荷载作用下产生的损伤进行了现场实验研究。研究结果表明:爆破冲击荷载对距离爆源7 m范围内的岩石会造成损伤破坏,其损伤程度随着岩石与爆源距离的增大而减小;岩体声波速度随着爆破次数的不断增加而逐渐降低,多次爆破对岩石具有损伤累积效应;多次爆破的累积损伤不是单次爆破损伤的简单叠加,具有非线性特性,且距离爆源越近爆破累积损伤效应越明显。     

基于电磁感应的扭转振动测量方法

设计了一种基于电磁感应效应的转子扭转振动测量方法.该方法的思路是使线圈与永磁体做相对运动,根据线圈切割磁感应线的速度与感应电动势正相关的原理,由线圈两端的电压变化量计算各点的瞬时速度变化量,进而积分求出扭振信息.算法上采用半周期插值以及与标准信号进行对应点比较,保证了瞬时速度变化量的精确度.装置设计方面通过适当的空间布局,在一定程度上消除了轴向振动和部分横振的影响.实测验证表明,该方法得出了与输入载荷一致的扭振信息,具有精确性良好,安装简易,操作方便的特点.     

基于速度辅助的车载卫星定向模糊度动态确定方法

针对车载双天线卫星定向系统的载波相位模糊度动态确定,探讨了速度辅助对模糊度搜索空间的约束性能,首次提出主天线速度矢量方向与车体纵轴之间偏离角的定量表达式,从而实现了准确设置卫星定向模糊度解算中的航向搜索范围。对实际车载数据的分析验证了该方法的有效性,不但适用于车载纯卫星定向系统,而且适用于多天线卫星定向（定姿）/IMU组合车载航姿确定系统,可显著提高卫星定向动态模糊度搜索速度及成功率,尤其增强车辆机动时的模糊度初始化性能。     

Experimental study of sedimentation characteristics of spheroidal particles

sented to correct for the shape effects.     

飞秒脉冲在熔石英玻璃中超连续谱产生的研究

从非线性薛定谔方程出发,利用分步傅里叶方法,研究了时空耦合飞秒脉冲在熔石英玻璃中传输时,传输距离、入射激光脉冲峰值功率、衍射、色散和非线性等因素对超连续谱产生的影响。结果表明,飞秒脉冲在熔石英玻璃中传输时,超连续谱的产生主要分为两阶段：由材料的自聚焦等三阶非线性效应引起的脉冲压缩阶段及由自相位调制和材料群速度色散引起脉冲分裂阶段。当高峰值功率的飞秒脉冲在熔石英玻璃中传输时,材料的三阶非线性效应抑制衍射效应,引起脉冲压缩,从而产生子脉冲,由此引入新的频率成分。同时,还研究了同一脉冲不同横向空间位置处的超连续谱的变化规律,在中心频率两侧均有新频率产生。最后,通过实验证实了超连续谱的产生。     

Velocity distribution of flow with submerged flexible vegetations based on mixing-length approach

By choosing a PVC slice to simulate flexible vegetation, we carried out experiments in an open channel with submerged flexible vegetation. A 3D acoustic Doppler velocimeter （micro ADV） was used to measure local flow velocities and Reynolds stress. The results show that hydraulic characteristics in non-vegetation and vegetation layers are totally different. In a region above the vegetation, Reynolds stress distribution is linear, and the measured velocity profile is a classical logarithmic one. Based on the concept of new-riverbed, the river compression parameter representing the impact of vegetation on river is given, and a new assumption of mixing length expression is made. The formula for time-averaged velocity derived from the expression requires less parameters and simple calculation, and is useful in applications.     

过渡区气体微尺度流动的格子Boltzmann模拟

采用格子Boltzmann方法(LBM)对过渡区内的微尺度气体流动进行了模拟研究. 在已有滑移区微流动LBM模型中引入Knudsen层速度修正,选取合适的修正函数表达式并依据动理论确定了可调参数的合理取值. 在边界条件的处理格式上,采用了适合过渡区模拟的高阶滑移边界的替代格式来捕捉过渡区微流动的滑移速度,避免了直接求解高阶速度导数项的数值困难. 通过对两类不同的微流动进行模拟的结果表明:与数值解吻合得较好,尤其是对Kn>0.5微流动滑移速度的预测,与已有LBM的模拟结果相比有明显的提高.      

各向异性粘弹性多孔截止中平面波的传播

This study discusses wave propagation in perhaps the most general model of a poroelastic medium. The medium is considered as a viscoelastic, anisotropic and porous solid frame such that its pores of anisotropic permeability are filled with a viscous fluid. The anisotropy considered is of general type, and the attenuating waves in the medium are treated as the inhomogeneous waves. The complex slowness vector is resolved to define the phase velocity, homogeneous attenuation, inhomogeneous attenuation, and angle of attenuation for each of the four attenuating waves in the medium. A non-dimensional parameter measures the deviation of an inhomogeneous wave from its homogeneous version. An numerical model of a North-Sea sandstone is used to analyze the effects of the propagation direction, inhomogeneity parameter, frequency regime, anisotropy symmetry, anelasticity of the frame, and viscosity of the pore-fluid on the propagation characteristics of waves in such a medium.     

Shear and normal stress relaxation in polymer blends: stress predictions from interface velocity and Laplace pressure terms

We derived for the first time the relationships among shear stress and normal stress differences for ellipsoidal interfaces under large step shear strains considering interface velocity term and Laplace pressure term in the expression of the stress tensor for mixtures of two Newtonian fluids. In the derivation, orientation angle of the interface is assumed to be given by the affine deformation assumption and is independent of time based on experimental results for blends with 0.048 ≤ K ≤ 0.54 where K is the ratio of droplet viscosity to matrix viscosity. For ellipsoidal droplets, the shear stress is only proportional to the first normal stress difference. On the other hand, for spheroidal droplets, proportionality among the shear stress, the first and the second normal stress differences was derived, and the ratio of the second normal stress difference to the first normal stress difference was given as a function of step strain. The shear stress and the first normal stress difference obtained experimentally satisfy the derived relationship, indicating applicability of the stress expression for polymer blends.