Demonstration of two-point velocity measurement using diffraction grating elements for integrated multi-point differential laser Doppler velocimeter

We have proposed a configuration of an integrated multi-point differential laser Doppler velocimeter (LDV) using arrayed waveguide gratings (AWGs) as grating elements. This paper demonstrates two-point velocity measurement using the proposed configuration with diffraction grating elements. An experiment was conducted using a free-space optical setup with bulk diffraction gratings instead of AWGs. The experimental results indicate that velocities at different positions can be measured using the proposed configuration. The measured separation of the two measurement positions was about 20.5 mm, about 11% of the working distance.     

Ultrasonic monitoring of malolactic fermentation in red wines

The progress of malolactic fermentation in red wines has been monitored by using ultrasonic techniques. The evolution of ultrasonic velocity of a tone burst 1 MHz longitudinal wave was measured, analyzed and compared to those parameters of oenological interest obtained simultaneously by analytical methods. Semi-industrial tanks were used during measurements pretending to be in real industrial conditions. Results showed that the ultrasonic velocity mainly changes as a result of the conversion by lactic acid bacteria of malic acid into lactic acid and CO₂. Overall, the present study has demonstrated the potential of the ultrasonic technique in monitoring the malolactic fermentation process.     

海底介质的声学特性研究

海底作为声波在水中传播的下边界,其声学特性对水中声场分布的影响巨大。在近60年的研究中,海底沉积物的声学特性建模研究已取得众多成果,然而这些成果还远远不能满足现代化水声技术发展的要求。文章从基本的海底结构组成出发,在海底地声建模的基础上揭示出声波与海底的作用关系。     

Pulse wave velocity with 4D flow MRI: Systematic differences and age-related regional vascular stiffness

Purpose

The objective of this study was to compare multiple methods for estimation of PWV from 4D flow MRI velocity data and to investigate if 4D flow MRI-based PWV estimation with piecewise linear regression modeling of travel-distance vs. travel time is sufficient to discern age-related regional differences in PWV.

Methods

4D flow MRI velocity data were acquired in 8 young and 8 older (age: 23 ± 2 vs. 58 ± 2 years old) normal volunteers. Travel-time and travel-distance were measured throughout the aorta and piecewise linear regression was used to measure global PWV in the descending aorta and regional PWV in three equally sized segments between the top of the aortic arch and the renal arteries. Six different methods for extracting travel-time were compared.

Results

Methods for estimation of travel-time that use information about the whole flow waveform systematically overestimate PWV when compared to methods restricted to the upslope-portion of the waveforms (p < 0.05). In terms of regional PWV, a significant interaction was found between age and location (p < 0.05). The age-related differences in regional PWV were greater in the proximal compared to distal descending aorta.

Conclusion

Care must be taken as different classes of methods for the estimation of travel-time produce different results. 4D flow MRI-based PWV estimation with piecewise linear regression modeling of travel-distance vs. travel time can discern age-related differences in regional PWV well in line with previously reported data.     

Determination of N and O‐atoms and N2 (A) Metastable Molecule Densities in the Afterglows of N2‐H2, Ar‐N2‐H2 and Ar‐N2‐O2 Microwave Discharges

Early afterglows of N₂‐H₂, Ar‐N₂‐H₂ and Ar‐N₂‐O₂ flowing microwave discharges are characterized by optical emission spectroscopy. The N and O atoms and the N₂ (A) metastable molecule densities are determined by optical emission spectroscopy after calibration by NO titration for N and O‐atoms and measurements of NO and N₂ band intensities. If an uncertainty of 30% is estimated on N‐atomic density, an inaccuracy of one order of magnitude is obtained on the O and N₂ (A) densities. In N₂‐(0.05‐2.5%)H₂ and Ar‐(1‐50%)N₂‐(0.05‐2.5%) H₂ gas mixtures, the O‐atoms are coming from O₂ impurities in the discharge. Concentrations of N and O‐atoms and of N₂ (A) densities are compared to the ones obtained in Ar‐(5‐50%)N₂‐(0.2‐2.5%) O₂ gas mixtures in which a controlled amount of O₂ is added. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

水中上浮气泡动态特性研究

针对水中的上浮气泡,计入表面张力的作用,然后将气泡边界层内黏性效应分为法向和切向两部分,其中附加法向黏性应力通过Young-Laplace关系考虑;附加切向黏性力是基于黏性耗散能量等效原理,引入黏性修正压力代替.首先建立了轴对称和三维上浮气泡边界元模型,将数值结果与理论值和实验值进行对比分析,有良好的符合度,验证了数值模型的有效性;然后针对毫米量级上浮气泡的平衡速度与形态,讨论了气泡初始条件、表面张力和黏性对气泡上浮过程中动力学行为的影响;最后,提出了一种处理三维上浮气泡融合的数值方法,计算结果与实验现象符合良好,并且能够反映气泡融合后的复杂现象细节.     

粗糙纳通道内流体流动与传热的分子动力学模拟研究

为研究粗糙表面对纳尺度流体流动和传热及其流固界面速度滑移与温度阶跃的影响,本文建立了粗糙纳通道内流体流动和传热耦合过程的分子动力学模型,模拟研究了粗糙通道内流体的微观结构、速度和温度分布、速度滑移和温度阶跃并与光滑通道进行了比较,并分析了固液相互作用强度和壁面刚度对界面处速度滑移和温度阶跃的影响规律. 研究结果表明,在外力作用下,纳通道主流区域的速度分布呈抛物线分布,由于流体流动导致的黏性耗散使得纳通道内的温度分布呈四次方分布. 并且,在固体壁面处存在速度滑移与温度阶跃. 表面粗糙度的存在使得流体剪切流动产生了额外的黏性耗散,使得粗糙纳通道内的流体速度水平小于光滑通道,温度水平高于光滑通道,并且粗糙表面的速度滑移与温度阶跃均小于光滑通道. 另外,固液相互作用强度的增大和壁面刚度的减小均可导致界面处速度滑移和温度阶跃程度降低. 关键词： 速度滑移 温度阶跃 流固界面 粗糙度     

锂离子进入碳纳米管端口速度的分子动力学模拟

锂离子进入碳纳米管端口的速度V Li是影响锂离子电池充电性能的重要因素.采用分子动力学模拟方法,研究了直径、温度、电场强度和端口改性官能团四种因子对其影响.运用正交实验方法,分析得出了各因子及其不同水平的影响规律.结果表明,四种因子的影响力度由大到小依次为:电场强度、官能团类型、碳纳米管直径和温度.在本文的模拟条件下,随着电场强度和碳纳米管直径的增大,V Li逐渐增加,且在电场强度下的增幅会更显著;碳纳米管端口官能团分别改性为氢原子(—H),羟基(—OH),氨基(—NH2)以及羧基(—COOH)时,V Li会逐步降低;随着温度的增大,V Li先增加后减小,但整体波动偏幅不大.     

全三维35 GHz双阳极磁控注入式电子枪数值模拟研究

基于trade-off平衡方程组得到35GHz双阳极磁控注入式电子枪的初始参数,通过编程对其主要参数进行优化设计,并经由自主研发的PIC粒子模拟软件CHIPIC中的电子枪计算模块对其进行全三维的数值模拟研究,最终获得了具有横纵速度比为1.5,最大速度零散约为5.4%的高性能电子枪,能够很好地满足35GHz-100kW回旋振荡管对电子束的要求。     

多普勒雷达测量电磁轨道炮内弹道速度

介绍了W波段多普勒雷达测量电磁轨道炮内弹道度速度的基本方法,并对口径30mm×25mm的串联增强型电磁轨道炮内弹道速度进行了实际测量。初步研究表明:雷达接收的信号易受到脉冲放电过程的干扰;雷达信号的信噪比取决于电枢与轨道电接触状态,在电源充电电压较低、接触面无电弧生成时测得了完整的内弹道速度,并与丝网靶和磁探针测量结果吻合;在较高充电电压条件下,由于电弧电接触产生的干扰,测速结果不够理想。