Fabrication of ozone gas sensor based on FeOOH/single walled carbon nanotube-modified field effect transistor

A novel ozone (O₃) sensor is fabricated using commercial metal oxide field effect transistor (MOSFET), modified with single-walled carbon nanotubes (SWCNTs). In this study, integrated circuit (IC: BS250) was selected as the selective probe for O₃ detection. For this purpose, a plastic cover on the surface of the drain was drilled to bare the drain surface, followed by its modification with nitrogen and sulfur-functionalized SWCNTs by chemical vapor deposition (CVD) process. The CVD-synthesized SWCNTs were then electrodeposited with FeOOH nanostructures. According to the figures of merit, the fabricated sensor gave a linear output from 20 to 450 parts per billion (ppb). Detection limit was also 4.1?ppb. Relative standard deviation (RSD) for seven replicate analyses was 3.61%. Based on 90% of maximum response (t₉₀), the response time was ～1.5?min. Calibration sensitivity was measured to 1.3?mV/ppb. No interference was observed, when introducing at least 500 folds of interferences of gaseous species such as H₂O, HCl, H₂S, O₂, H₂, CO, CO₂, NO₂, SO₂, Cl₂, C₂H₂, CH₄ and volatile organic compounds (VOCs) to 250?ppb of O₃ solution. Reliability of the sensor was also evaluated via determination of O₃ in different air samples.     

Gadolinium(III)‐Hydroxy Ladders Trapped in Succinate Frameworks with Optimized Magnetocaloric Effect

Two kinds of inorganic gadolinium(III)‐hydroxy “ladders”, [2×n] and [3×n], were successfully trapped in succinate (suc) coordination polymers, [Gd₂(OH)₂(suc)₂(H₂O)]_n ? 2n H₂O ( 1 ) and [Gd₆(OH)₈(suc)₅(H₂O)₂]_n ? 4n H₂O ( 2 ), respectively. Such coordination polymers could be regarded as alternating inorganic–organic hybrid materials with relatively high density. Magnetic and heat capacity studies reveal a large cryogenic magnetocaloric effect (MCE) in both compounds, namely (ΔH=70 kG) 42.8 J kg^?1 K^?1 for complex 1 and 48.0 J kg^?1 K^?1 for complex 2 . The effect of the high density is evident, which gives very large volumetric MCEs up to 120 and 144 mJ cm^?3 K^?1 for complexes 1 and 2 , respectively.     

Probing Helical Hydrophobic Binding Sites in Branched Starch Polysaccharides Using NMR Spectroscopy

Branched starch polysaccharides are capable of binding multiple hydrophobic guests, but their exploitation as multivalent hosts and in functional materials is limited by their structural complexity and diversity. Linear α(1–4)‐linked glucose oligosaccharides are known to bind hydrophobic guests inside left‐handed single helices in solution and the solid state. Here, we describe the development of an amphiphilic probe that binds to linear α(1–4)‐linked glucose oligosaccharides and undergoes a conformational switch upon complexation, which gives rise to dramatic changes in the ¹H NMR spectrum of the probe. We use this probe to explore hydrophobic binding sites in the branched starch polysaccharides amylopectin and β‐limit dextrin. Diffusion‐ordered (DOSY), nuclear Overhauser effect (NOESY) and chemical shift perturbation (HSQC) NMR experiments are utilised to provide evidence that, in aqueous solution, branched polysaccharides bind hydrophobic guests in well‐defined helical binding sites, similar to those reported for complexation by linear oligosaccharides. By examining the binding affinity of the probe to systematically enzymatically degraded polysaccharides, we deduce that the binding sites for hydrophobic guests can be located on internal as well as external branches and that proximal α(1–6)‐linked branch points weaken but do not prevent complexation.     

Synthesis and Optical Properties of Water‐Soluble Polyglycerol‐Dendronized Rylene Bisimide Dyes

Four new water‐soluble polyglycerol‐dendronized perylene, terrylene, and quaterrylene bisimides have been synthesized and characterized with respect to their optical properties in polar organic solvents and water by using UV/Vis and fluorescence spectroscopy. All of these dyes were highly soluble in water, but the size of the chosen polyglycerol dendron was only sufficient to completely suppress dye aggregation for the core‐unsubstituted perylene derivative. Their high solubility in water and their absorption and emission wavelengths up to the NIR region make the core‐unsubstituted perylene and terrylene bisimides ideal candidates for applications in bioimaging, whilst the lack of fluorescence for quaterrylene bisimide in all polar solvents does not warrant further investigation of this chromophore in fluorescence and imaging applications. Likewise, tuning of the emission of rylene bisimides towards longer wavelengths by employing electron‐donating bay substituents is not a promising strategy, owing to the lower fluorescence quantum yields in polar solvents and, in particular, in water.     

Near‐Infrared‐Controlled,Targeted Hydrophobic Drug‐Delivery System for Synergistic Cancer Therapy

Hydrophobicity has been an obstacle that hinders the use of many anticancer drugs. A critical challenge for cancer therapy concerns the limited availability of effective biocompatible delivery systems for most hydrophobic therapeutic anticancer drugs. In this study, we have developed a targeted near‐infrared (NIR)‐regulated hydrophobic drug‐delivery platform based on gold nanorods incorporated within a mesoporous silica framework (AuMPs). Upon application of NIR light, the photothermal effect of the gold nanorods leads to a rapid rise in the local temperature, thus resulting in the release of the entrapped drug molecules. By integrating chemotherapy and photothermotherapy into one system, we have studied the therapeutic effects of camptothecin‐loaded AuMP‐polyethylene glycol‐folic acid nanocarrier. Results revealed a synergistic effect in vitro and in vivo, which would make it possible to enhance the therapeutic effect of hydrophobic drugs and decrease drug side effects. Studies have shown the feasibility of using this nanocarrier as a targeted and noninvasive remote‐controlled hydrophobic drug‐delivery system with high spatial/temperal resolution. Owing to these advantages, we envision that this NIR‐controlled, targeted drug‐delivery method would promote the development of high‐performance hydrophobic anticancer drug‐delivery system in future clinical applications.     

How the Generalized Anomeric Effect Influences the Conformational Preference

The generalized anomeric effect refers to the conformational preference of a gauche structure over an anti structure for molecules with a R‐X‐C‐Y moiety. Whereas there are conflicting reports regarding the origin of this ubiquitous effect, a general consensus is that both the steric (more specifically electrostatic) and hyperconjugative interactions contribute. Here we employed the block‐localized wavefunction (BLW) method, which is the simplest variant of ab initio valence bond (VB) theory and can define reference electron‐localized states self‐consistently, to evaluate the magnitude of the hyperconjugation effect in a number of acyclic molecules exhibiting the generalized anomeric effect. The BLW‐based energy decomposition analysis revealed that both the steric and hyperconjugation effects contribute to the conformational preferences of methoxymethyl fluoride and methoxymethyl chlorides. But for the other systems under investigation, including methanediol, methanediamine, aminomethanol and dimethoxymethane, the hyperconjugative interactions play a negative role in the conformational preferences and the steric effect is solely responsible for the generalized anomeric effect.     

氢气对正丁烷/空气混合物催化着火的热作用和化学作用

通过对正丁烷/氢气/空气混合物在Pt 催化表面的详细反应机理分析, 研究了氢气添加对正丁烷/空气混合物催化着火过程的影响. 研究发现, 在正丁烷/空气混合中添加氢气有助于正丁烷在更低的温度下实现催化着火, 而且不同的氢气添加量对混合物的着火温度和着火过程呈现不同的影响: 当氢气添加量较小时, 氢气的作用主要呈现为热影响; 而当氢气添加量较大时, 氢气的作用主要呈现为化学影响. 这些结果与实验结果是一致的. 本文进一步确定了发挥不同作用的氢气添加量的范围, 并分别对热作用和化学作用情况下的着火启动反应进行了动力学分析.     

钪元素对AB2型合金Zr1-xScxMn0.6V0.2Ni1.2Co0.1（x=0～1）储氢和电化学性能的影响

用真空电弧熔炼方法制备了Zr1-xScxMn0.6V0.2Ni1.2Co0.1(x=0～1)AB2型储氢合金,研究了Sc元素替代Zr对合金的微观组织结构、气态储氢及电化学性能的影响。研究结果表明,Zr1-xScxMn0.6V0.2Ni1.2Co0.1合金主要是由FCC型C15相、CsCl型结构的(ScZr)Ni相和少量的Ni10Zr7相组成,随Sc含量的增加,C15相丰度逐渐减小,(ScZr)Ni相丰度逐渐增加,当x=0.2时Ni10Zr7相基本消失;Sc元素对合金的首次气态吸氢动力学行为影响较大,随Sc含量的增加,合金吸氢动力学性能逐渐变缓,但吸氢容量逐渐提高,直至达x=1.0时的最大吸氢量1.87%;Sc元素对合金吸氢PCT曲线平衡氢压的影响规律不明显,随Sc含量增加,合金氢化物的形成焓ΔH从-26.66 kJ.mol-1逐渐减小到-8.14 kJ.mol-1。Sc元素的加入可明显改善合金电极的活化性能,提高放电容量,随Sc含量的增加,合金电极最大放电容量从x=0时的350.3 mAh.g-1增加到x=1时的429.8 mAh.g-1,呈先减小后增大的趋势,但电极容量的保持率S100随Sc含量增加而快速下降。     

电场对金属串配合物M3(dpa)4Cl2 (M=Co,Rh, Ir; dpa=dipyridylamide)结构的影响

应用密度泛函理论PBE0 方法研究具有分子导线潜在应用的金属串配合物M₃(dpa)₄Cl₂ (1: M=Co, 2: M=Rh, 3: M=Ir; dpa=dipyridylamide)在电场作用下的几何和电子结构. 结果表明: 配合物基态均是二重态. 1和2的M₃⁶⁺金属链形成三中心三电子σ键, 3 中M₃⁶⁺形成三中心四电子σ键且存在弱的δ键. 随金属原子周期数增大其M―M键增强、LUMO与HOMO能隙减小、金属原子的反铁磁耦合减弱以至消失且自旋密度向配体的离域增强. 在Cl4→Cl5 电场作用下, 低电势端的M3－Cl5 键缩短, 高电势端的M2―Cl4 键增长, M―M平均键长略为缩短, M―M键增强, 有利于分子线的电子传递; 分子能量降低, 偶极矩线性增大. 低电势端Cl5的负电荷向高电势端Cl4 转移, 且3 中金属原子的正电荷由高电势端向低电势端的转移较明显, 自旋电子由低电势端向高电势端金属原子移动, 但桥联配体dpa^-与M和Cl 所在的分子轴间没有电荷转移. 电场使LUMO与HOMO能隙减小, 有利于分子的电子输运. 随金属原子周期数增大, 电场作用下M―M平均键长变化减小, LUMO、HOMO的能级交错现象减少.