Synthesis and characterization of novel perfluorinated polyimides with 3D‐controlled structures for photonic applications

We have designed and synthesized novel perfluorinated polyimides with 3D controlled structure. At first, we successfully developed the new synthetic routes to diamines with pendant bulky perfluorinated aromatic units in a multi‐step synthetic procedure. Novel perfluorinated polyimides were prepared in a two‐step reaction in N‐methyl‐2‐pyrrolidinone (NMP) solution: The first step was for the synthesis of polyamic acids (PAAs) and the second reaction was for the imidization of PAA. The polymer yield was over 89% and the inherent viscosity of PAAs was in the range of 0.24–0.36 dL/g. The thin films were prepared by spin‐coating the PAA solution in NMP onto various substrates such as a Si wafer or a KBr pellet, dried at 80 °C and further cured at 230 °C. The resultant polyimides are thermally stable over 400 °C. The refractive index and birefringence of the resultant polyimides are 1.5858–1.6452 and 0.01–0.005, respectively. The refractive index of polyimide decreases with increasing the fluorine content. The copolymerization and the ether linkages into the backbone reduce the birefringence of polyimides. Surprisingly, the pendant ether linkage is not a crucial factor in reducing the polyimide birefringence. Their birefringence is comparatively very low, compared with that of previous polyimides. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1326–1342, 2006     

干部、人事档案的动态材料收集浅议

干部、人事档案是组织考察、使用干部的主要依据之一,是干部工作的重要组成部分,而干部、人事档案又是在动态管理之中产生的.因此,必须加强对干部、人事档案工作的领导,明确责任,严格审查,认真核对,确保干部、人事档案收集及时、完整真实.     

中国代木包装的现状及发展研究(续)

4 今后发展代木包装的思考及研究我国代木包装虽兴起于七十年代,但在八十年代中期才受到应有的重视和较快的发展,现在在数量、品种、性能上还不能满足各方面包装的需要。随着今后国民经济的进一步发展,必然要求代木包装在数量、质量上要有一个更大的发展。为此,本文在前述对国内外代木包装分析的基础上,兹就今后发展代木包装的目标及方针,任务及规划,对策及措施初步探讨如下。     

喷雾干燥-高温固相法制备纳米LiFePO4与LiFePO4/C材料及性能研究

采用喷雾干燥-高温固相法制备纳米LiFePO₄与LiFePO₄/C正极材料，用X-射线衍射，扫描电镜等对合成材料进行了表征，并对以LiFePO₄为正极的电池进行了电化学性能测试。结果表明:材料合成最佳煅烧温度为600 ℃;合成过程中由于碳对LiFePO₄晶型的生长有一定的抑制作用，相对于纯LiFePO₄材料，LiFePO₄/C材料粒径更小;并且，在此最佳合成温度下合成的LiF     

Hydrogel nanonetworks with functional core-shell structure

Nanohydrogel particles of poly(acrylonitrile-co-N-isopropylacrylamide (p(AN-c-NIPAM)) were synthesized using a microemulsion polymerization technique. Highly monodisperse nanohydrogel particles e.g. 50-150 nm, and various morphology such as core-shell and connected beads were obtained. It was shown that the shell thickness and the size of particles can be tuned by the monomer concentrations and their ratios as well as by the utilization of different crosslinkers. The hydrophobic core monomer, AN was converted to amidoxime groups to increase the hydrophilicity of the nanogels which provide more hydrophilic character and impart new functionality to the nanonetwork. Transmission electron microscopy (TEM), and dynamic light scattering (DLS) techniques were employed for the particle size characterizations. The amidoximation reaction was confirmed by FT-IR spectroscopy.     

介孔材料在烯烃环氧化中的催化应用

本文综述了介孔材料在烯烃环氧化反应中的应用,包括材料的制备方法、催化性能以及活性中心的表征。通过硅钛原子的合理匹配可以达到四配位钛的高度分散,从而提高催化活性。硅烷化处理增加材料表面的疏水性,能够大幅度提高活性和选择性。通过多种谱学和分子模拟等手段可表征骨架钛及其配位情况。     

晶化温度对中孔分子筛（M41S）结构转变的影响

在低表面活性剂浓度及低表面活性剂与氧化硅比的条件下，研究了十六烷基三甲基溴化铵－硅酸钠体系中晶化温度对中孔分子筛Ｍ４１Ｓ材料结构转变的影响。结果有，晶化温度提高至１３５℃改变了原六方晶相ＭＣＭ－４１的结构，晶化温度提高到１５０℃后，中孔结构六方ＭＣＭ－４１晶格转变为变不稳定的层状相，