Synthesis and characterization of novel perfluorinated polyimides with 3D‐controlled structures for photonic applications

We have designed and synthesized novel perfluorinated polyimides with 3D controlled structure. At first, we successfully developed the new synthetic routes to diamines with pendant bulky perfluorinated aromatic units in a multi‐step synthetic procedure. Novel perfluorinated polyimides were prepared in a two‐step reaction in N‐methyl‐2‐pyrrolidinone (NMP) solution: The first step was for the synthesis of polyamic acids (PAAs) and the second reaction was for the imidization of PAA. The polymer yield was over 89% and the inherent viscosity of PAAs was in the range of 0.24–0.36 dL/g. The thin films were prepared by spin‐coating the PAA solution in NMP onto various substrates such as a Si wafer or a KBr pellet, dried at 80 °C and further cured at 230 °C. The resultant polyimides are thermally stable over 400 °C. The refractive index and birefringence of the resultant polyimides are 1.5858–1.6452 and 0.01–0.005, respectively. The refractive index of polyimide decreases with increasing the fluorine content. The copolymerization and the ether linkages into the backbone reduce the birefringence of polyimides. Surprisingly, the pendant ether linkage is not a crucial factor in reducing the polyimide birefringence. Their birefringence is comparatively very low, compared with that of previous polyimides. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1326–1342, 2006     

干部、人事档案的动态材料收集浅议

干部、人事档案是组织考察、使用干部的主要依据之一,是干部工作的重要组成部分,而干部、人事档案又是在动态管理之中产生的.因此,必须加强对干部、人事档案工作的领导,明确责任,严格审查,认真核对,确保干部、人事档案收集及时、完整真实.     

The stress driven instability in elastic crystals: Mathematical models and physical manifestations

Summary Equilibrium equations and stability conditions for the simple deformable elastic body are derived by means of considering a minimum of the static energy principle. The energy is supposed to be sum of the volume (elastic) and the surface terms. The ability to change relative positions of different material particles is taken into account, and appropriate natural definitions of the first and second variations of the energy are introduced and calculated explicitly. Considering the case of negligible magnitude of the surface tension, we establish that an equilibrium state of a nonhydrostatically stressed simple elastic body (of any physically reasonable elastic energy potential and of any symmetry) possessing any small smooth part of free surface is always unstable with respect to relative transfer of the material particles along the surface. Surface tension suppresses the mentioned instability with respect to sufficiently short disturbances of the boundary surface and thus can probably provide local smoothness of the equilibrium shape of the crystal. We derive explicit formulas for critical wavelength for the simplest models of the internal and surface energies and for the simplest equilibrium configurations. We also formulate the simplest problem of mathematical physics, revealing peculiarities and difficulties of the problem of equilibrium shape of elastic crystals, and discuss possible manifestations of the above-mentioned instability in the problems of crystal growth, materials science, fracture, physical chemistry, and low-temperature physics.     

氧同位素标准样品的研制

使用高纯同位素物质精确配制同位素混合物,作为标准物,确定质谱仪器的系统误差。本工作用天然丰度水定量稀释高浓重氧水,制取从0.1982至96.92原子％~(18)O的氧同位素标准水样,用来校准质谱仪器。 实验采用BrF_5将水样转化成O_2。用质谱峰高法测定(18)~O和(17)~O丰度。比较质谱测定值和计算得到的丰度值C,求出质谱仪固有偏差校正系数K、并得到K与C的线性相关关系。 共得到16个具有准确丰度值的氧同位素标准水样。     

中国代木包装的现状及发展研究(续)

4 今后发展代木包装的思考及研究我国代木包装虽兴起于七十年代,但在八十年代中期才受到应有的重视和较快的发展,现在在数量、品种、性能上还不能满足各方面包装的需要。随着今后国民经济的进一步发展,必然要求代木包装在数量、质量上要有一个更大的发展。为此,本文在前述对国内外代木包装分析的基础上,兹就今后发展代木包装的目标及方针,任务及规划,对策及措施初步探讨如下。     

喷雾干燥-高温固相法制备纳米LiFePO4与LiFePO4/C材料及性能研究

采用喷雾干燥-高温固相法制备纳米LiFePO₄与LiFePO₄/C正极材料，用X-射线衍射，扫描电镜等对合成材料进行了表征，并对以LiFePO₄为正极的电池进行了电化学性能测试。结果表明:材料合成最佳煅烧温度为600 ℃;合成过程中由于碳对LiFePO₄晶型的生长有一定的抑制作用，相对于纯LiFePO₄材料，LiFePO₄/C材料粒径更小;并且，在此最佳合成温度下合成的LiF     

纳秒激光闪光光解装置功能扩展──有机非线性材料二阶非线性系数测定

纳秒级激光闪光光解装置可用于有机光化学、光物理过程，瞬态发光和吸收的动力学过程的研究，在不改变原装置整体布局和结构的基础上，建立了有机非线性光学材料的二阶非线性系数测定方法，并为国家８６３专家委员会承担过仲裁测定。     

Hydrogel nanonetworks with functional core-shell structure

Nanohydrogel particles of poly(acrylonitrile-co-N-isopropylacrylamide (p(AN-c-NIPAM)) were synthesized using a microemulsion polymerization technique. Highly monodisperse nanohydrogel particles e.g. 50-150 nm, and various morphology such as core-shell and connected beads were obtained. It was shown that the shell thickness and the size of particles can be tuned by the monomer concentrations and their ratios as well as by the utilization of different crosslinkers. The hydrophobic core monomer, AN was converted to amidoxime groups to increase the hydrophilicity of the nanogels which provide more hydrophilic character and impart new functionality to the nanonetwork. Transmission electron microscopy (TEM), and dynamic light scattering (DLS) techniques were employed for the particle size characterizations. The amidoximation reaction was confirmed by FT-IR spectroscopy.     

介孔材料在烯烃环氧化中的催化应用

本文综述了介孔材料在烯烃环氧化反应中的应用,包括材料的制备方法、催化性能以及活性中心的表征。通过硅钛原子的合理匹配可以达到四配位钛的高度分散,从而提高催化活性。硅烷化处理增加材料表面的疏水性,能够大幅度提高活性和选择性。通过多种谱学和分子模拟等手段可表征骨架钛及其配位情况。